Rubidiumâ„¢ MG362x1A SeriesLow-Noise RF/Microwave SignalGenerators : Instrument Operation : Resetting to Default Parameters
Resetting to Default Parameters
Reset the MG362x1A to the factory selected default parameter values at any time during normal operation.
Resetting the instrument clears the current setup parameters. If these parameter values are needed for future testing, save them as a stored setup before resetting the signal generator. For information on saving and recalling instrument setups, refer to Saving Setups.
Factory Reset will delete the last saved settings, restore all the settings to their factory default vales and will restart the signal generator.
To reset the signal generator:
Press: 3-Line Icon | SETTINGS | RESET | RESET ALL
System Menu - Reset All