• A general description of the GPIB and the bus data transfer and control functions
• A listing of the IEEE-488 Interface Function Messages recognized by the signal generator with a description of its response
• A complete listing and description of all the Standard Commands for Programmable Instruments (SCPI) commands that can be used to control signal generator operation with examples of command usage
• Error messages related to the MG362x1A operation
This manual is intended to be used in conjunction with the Series MG362x1A Synthesized Signal Generator Operation Manual, P/N: 10370-10383. Refer to that manual for general information about the MG362x1A, including equipment set up and front panel (manual mode) operating instructions.
Related Manuals
This is one of a four manual set that consists of an operation manual, programming manual, maintenance manual and a technical data sheet.
Operation Manual
The Series MG362x1A Synthesized Signal Generator Operation Manual provides general information, installation, and operating information for the Anritsu series MG362x1A synthesized signal generator. The Anritsu part number for the operation manual is 10370-10383.
Maintenance Manual
The Series MG362x1A Synthesized Signal Generator Maintenance Manual provides service information for all models in the MG362x1A series. The service information includes functional circuit descriptions, block diagrams, performance verification tests, calibration procedures, troubleshooting data, and assembly and component removal/replacement procedures. The Anritsu part number for the maintenance manual is 10370-10386.
Technical Data Sheet
The Series MG362x1A Synthesized Signal Generator technical data sheet provides performance specifications, operating conditions, list of options and accessories, and ordering information. The Anritsu part number for the maintenance manual is 11410-00928.