Remote Spectrum Monitor™ MS27201A User Guide : Instrument Overview : Software Update
Software Update
To update the MS27201A PC software, use a high quality USB memory device with at least 1 GB of memory space and FAT32 file system format, and follow the instructions below:
1. Insert the USB memory device into your PC or laptop.
2. From a browser, go to the following Anritsu products page:
3. On the product page, click Downloads and select Drivers/Firmware/Software.
4. Select the software update for your product and download it to the USB memory device.
5. Insert the USB memory device into the one of the MS27201A USB ports.
Installing the Software
1. Start the software update via one of the two ways below (see Figure: Updating the Software):
Access the upper left System Menu (3-line icon), then Click SYSTEM INFORMATION > SOFTWARE UPDATE.
Click the software update icon on the Title Bar.
2. Select the latest available update from the drop-down selections and Click Install.
A dialog will appear stating Software Update in Progress.
3. When the installation is complete, see Verify the Software Update.
Updating the Software
Verify the Software Update
1. Once the software update is complete, power off the MS27201A.
2. Power on the MS27201A.
3. Click the System menu icon (3-line icon) from the MS27201A to display the System Menu.
4. Select the System Information menu (see Figure: System Information).
5. Verify the Software Package Version displayed is the most current version installed.
System Information