Remote Spectrum Monitorâ„¢ MS27201A User Guide : Instrument Messages and Troubleshooting : Self-Test Messages
 
Self-Test Messages
Remote Spectrum Monitor has built-in diagnostics that allow you to run a built-in self test. The test results can be viewed on the screen and saved to a log file. To run self test, use the 3-line menu to access DIAGNOSTICS, then select SELF TEST and RUN SELF TEST. Below is a sample list of self tests with passing results:
TEST DATE: 2019-03-21 09:51:47 MDT
 
OVERALL STATUS : PASS
 
SYSTEM : OVERALL STATUS : PASS
System voltage : 13.00 V, 4.00 V ,15.01 V (PASS)
System power : 32.2083 W
External current : 2.50 A, 2.50 A ,2.32 A (PASS)
+0.85V LP core supply : 0.85 V, 0.09 V ,0.85 V (PASS)
+3.3V LP supply : 3.30 V, 0.33 V ,3.25 V (PASS)
+1.8V LP Vaux supply : 1.80 V, 0.18 V ,1.82 V (PASS)
+1.8V LP IO supply : 1.80 V, 0.18 V ,1.81 V (PASS)
+0.85V FP core supply : 0.85 V, 0.09 V ,0.85 V (PASS)
+1.8V DDR PLL supply : 1.80 V, 0.18 V ,1.81 V (PASS)
+0.85V PS transceiver AVCC : 0.85 V, 0.09 V ,0.85 V (PASS)
+1.8V PS transceiver AVTT : 1.80 V, 0.18 V ,1.83 V (PASS)
+2.5V DDR SODIMM supply : 2.50 V, 0.25 V ,2.49 V (PASS)
+1.2V DDR SODIMM supply : 1.20 V, 0.12 V ,1.20 V (PASS)
+0.85V FPGA core supply : 0.85 V, 0.09 V ,0.86 V (PASS)
+0.9V transceiver AVCC supply : 0.90 V, 0.09 V ,0.90 V (PASS)
+1.2V transceiver AVTT supply : 1.20 V, 0.12 V ,1.21 V (PASS)
+1.0V Ethernet supply : 1.00 V, 0.10 V ,0.99 V (PASS)
+1.8V FPGA supply : 1.80 V, 0.18 V ,1.79 V (PASS)
+2.5V FPGA supply : 2.50 V, 0.25 V ,2.48 V (PASS)
+3.3V FPGA supply : 3.30 V, 0.33 V ,3.29 V (PASS)
+5.0V USB/misc supply : 5.00 V, 0.50 V ,5.00 V (PASS)
+3.9V analog supply : 3.90 V, 0.39 V ,3.96 V (PASS)
+5.7V analog supply : 5.70 V, 0.57 V ,5.67 V (PASS)
-5.7V analog supply : -5.70 V, 0.57 V ,-5.26 V (PASS)
+12.8V analog supply : 12.80 V, 1.28 V ,12.82 V (PASS)
+24.0V analog supply : 24.00 V, 2.40 V ,23.92 V (PASS)
Backlight voltage : 22.00 V, 4.40 V ,19.56 V (PASS)
Backlight current : 0.20 A, 0.20 A ,0.18 A (PASS)
12.0V for fan : 12.00 V, 1.20 V ,12.00 V (PASS)
CPU Temperature : 61.0 C
Motherboard Temperature : 46.5 C
Fan speed, percent of full speed : 7 %
Fan speed : 2638 RPM
Temperature at Reference : 45.3 C
 
SPA : OVERALL STATUS : PASS
+12VG : 12.00 V, 1.20 V ,11.90 V (PASS)
+5V_PREAMP : 5.00 V, 0.50 V ,4.99 V (PASS)
+5VA : 5.00 V, 0.50 V ,5.02 V (PASS)
+5VG : 5.00 V, 0.50 V ,4.99 V (PASS)
+5VH : 5.00 V, 0.50 V ,5.02 V (PASS)
+5VI : 5.00 V, 0.50 V ,5.05 V (PASS)
+5V_VCO : 5.00 V, 0.50 V ,5.09 V (PASS)
+5VM : 5.00 V, 0.50 V ,5.01 V (PASS)
+5VP : 5.00 V, 0.50 V ,5.05 V (PASS)
+5V_SAW : 5.00 V, 0.50 V ,4.99 V (PASS)
+3V3_HBPA : 3.30 V, 0.33 V ,3.31 V (PASS)
+3V3_IF : 3.30 V, 0.33 V ,3.29 V (PASS)
+3V6 : 3.60 V, 0.36 V ,3.55 V (PASS)
+3V3_CAL : 3.30 V, 0.33 V ,3.36 V (PASS)
+3V3G : 3.30 V, 0.33 V ,3.33 V (PASS)
+3V3H : 3.30 V, 0.33 V ,3.29 V (PASS)
+3V3M : 3.30 V, 0.33 V ,3.32 V (PASS)
+3V3P : 3.30 V, 0.33 V ,3.33 V (PASS)
ADC_AVDD3_3V3 : 3.30 V, 0.33 V ,3.33 V (PASS)
+3V3IFA : 3.30 V, 0.33 V ,3.33 V (PASS)
+3V3DET : 3.30 V, 0.33 V ,3.35 V (PASS)
+3V3IFC : 3.30 V, 0.33 V ,3.37 V (PASS)
+3V3IFD : 3.30 V, 0.33 V ,3.35 V (PASS)
+3V3IF_OUT : 3.30 V, 0.33 V ,3.33 V (PASS)
SPARE : 0.00 V, 1.00 V ,0.00 V (PASS)
-5V : -5.00 V, 0.50 V ,-5.13 V (PASS)
+24VH : 24.00 V, 2.40 V ,24.18 V (PASS)
+3V3D : 3.30 V, 0.33 V ,3.27 V (PASS)
+2V5D : 2.50 V, 0.25 V ,2.50 V (PASS)
ADC_AVDD2_2V5 : 2.50 V, 0.25 V ,2.50 V (PASS)
ADC_AVDD1_1V25 : 1.25 V, 0.13 V ,1.25 V (PASS)
ADC_DRVDD_1V25 : 1.25 V, 0.13 V ,1.25 V (PASS)
DCM Not Available For This Option : 0.00 V, 0.00 V ,0.00 V (PASS)
Thermal Sensor 1 (Mid-band 1st IF) : 35.00 C, 90.00 C ,44.75 C (PASS)
Thermal Sensor 2 (Mid-band 2nd IF) : 35.00 C, 90.00 C ,46.00 C (PASS)
Thermal Sensor 3 (Low-band RF) : 35.00 C, 90.00 C ,42.00 C (PASS)
DCM Temperature Not Available For This Option : 0.00 C, 0.00 C ,0.00 C (PASS)
ADC Thermal Sensor : 35.00 C, 90.00 C ,39.93 C (PASS)
If any self test fails, try resetting the instrument with Reset All button found in Settings menu, and run the test again. If the condition persists, contact your local Anritsu Service Center (http://www.anritsu.com/contact-us).