Remote Spectrum Monitor™ MS27201A User Guide : Instrument Messages and Troubleshooting : Informational Messages
 
Informational Messages
Cannot start measurement without a connected Antenna
In Toolbar, Not Logged, Persistent
Concatenation has been aborted
When user aborts concatenation of streaming metadata files
External reference detected - switching reference source to external
In Toolbar, Logged, Transient
External reference disconnected – switching reference source to GPS
In Toolbar, Logged, Transient
External reference disconnected – switching reference source to internal
In Toolbar, Logged, Transient
External reference disconnected – switching reference source to Internal High
In Toolbar, Logged, Transient
File Does Not Exist
In Toolbar, Not Logged, Transient
File Recall Failed
In Toolbar, Not Logged, Transient
File Recalled Successfully
In Toolbar, Not Logged, Transient
File Save Failed
In Toolbar, Not Logged, Transient
File Saved Successfully
In Toolbar, Not Logged, Transient
File successfully saved as: filename
When saving a file (e.g., trace, setup).
GPS reference detected - acquiring GPS
In Toolbar, Logged, Transient
GPS reference acquired - switching reference source to GPS
In Toolbar, Logged, Transient
GPS reference disconnected – switching reference source to Internal
In Toolbar, Logged, Transient
GPS reference no longer available – switching reference source to Internal High
In Toolbar, Logged, Transient
Internal High reference no longer valid – switching frequency reference source to Internal
In Toolbar, Logged, Transient
Internal High reference no longer valid – switching time reference source to Internal
In Toolbar, Logged, Transient
Limit recall initiated
When a limit setup file is selected for recall.
Memory Full
Popup, Not Logged, Transient
Preset Completed
In Toolbar, Not Logged, Transient
Presetting Instrument
In Toolbar, Not Logged, Transient
Rebooting Instrument
In Toolbar, Not Logged, Transient
Recall initiated
When a file is selected for recall.
Reset Completed
In Toolbar, Logged, Transient
Resetting Instrument
In Toolbar, Logged, Transient
Successfully concatenated %1 files
When the concatenation of streaming metadata files is complete.
Screenshot saved.
When saving a screenshot is successful
Self test Passed
In Toolbar, Logged, Transient
Self test Failed
In Toolbar, Logged, Transient
Software update files found on USB
In Toolbar, Not Logged, Transient
Stopped saving sweeps after sweep complete.
When the save on event triggers are disabled after end-of-sweep.
Stopped saving sweeps after limit crossing.
When the save on event triggers are disabled after a limit fails.
File Saved Successfully
When a save on event trigger causes a file to be saved.
The selected mode is not yet available.
When an unavailable mode is selected.
Trace copied to memory
Trace cleared from memory
USB drive x ejected
In Toolbar, Not Logged, Transient