Load the IQ Signal Master Signal Analysis Software from the MX280005A Anritsu product page provided in Product Documentation
Installing the PCIe Driver
The PCIe driver becomes available, but is not automatically installed when the MX280005A software is installed. It must be manually installed into the PC as follows.
1. Run PLDADriverInstaller_3.8.5.exe file from the installation\Driver folder (default: C:\ProgramFiles\AnritsuCompany\MX280005A\PCIeDriver\PLDADriverInstaller_3.8.5.exe.
2. Follow the series of on-screen instructions during installation.g
When the Anritsu analyzer boots up, it does not automatically detect the FPGA image that supports PCIe data transfer. To detect the PCIe card, the analyzer and PC must be powered off and then powered on as described below:
1. Power on the Anritsu analyzer until it completely reboots and begins sweeping.
2. Power on the PC.
3. Refer to the Anritsu analyzer and the MX280005A user guides as provided in the Product Documentation to stream large data files with the PCIe card.