MS2070A/MS2080A Field Master™
Anritsu RF and Microwave Handheld Analyzers Product Information, Compliance, and Safety
Important Notices and Warranty
Applicable Product Models
Unauthorized Use or Disclosure
Export Management
Trademark Acknowledgments
Warranty Information
Limitation of Warranty
Disclaimer of Warranties
No Liability For Consequential Damages
Safety
Safety Notices Used in Manuals
Safety Symbols Used on Equipment and in Manuals
Safety Symbols and Notices
Regulatory Compliance
Compliance Notifications
CE Conformity Marking
European Parliament and Council Directive 2012/19/EC
UKCA Conformity Marking
RCM Conformity Marking
KCC Conformity Marking
Canadian ICES-001 and ICES-003 Conformity Marking
Recycle Marking
Proposition 65 Notification
Perchlorate Material Notification – Special Handling May Apply
Chinese RoHS Compliance Statement
Field Master™ MS2070A/MS2080A User Guide
General Information
Introduction
Before You Begin
Additional Documentation
Document Conventions
Instrument Description
Available Models
Available Options
Instrument Care and Preventive Maintenance
Ventilation and Cooling
Connector Care
ESD Caution
Calibration and Verification
Contacting Anritsu for Sales and Service
Instrument Overview
Introduction
Instrument Front Panel
Connector Panels
Top Connector Panel
Tilt Bail Stand
Battery Information
Replacing the Battery
Turning On the MS2070A/80A Field Master
Power/Charge LED Indicators
Shutting Down and Restarting
GUI Overview
Operating the Touch Screen
Title Bar
Data Entry
Scroll Indication
Selecting the Analyzer
System Menu
System Information
Notifications
Settings Menu
Display Settings
Sound Settings
Network Settings
Ethernet Settings
WIFI Settings
GNSS(GPS) Settings (Option 31)
Screenshot Setup
Language Settings
Date Time Settings
Port Setup
Options Settings
Maps Settings (Option 431)
ADVANCED
Reset Settings
File Management
File Locations
File Management Operations
Previewing Screenshots
Previewing PDF Reports
FTP Access
Diagnostics
Battery Information
Event Log
Self Test
Service
Tools Menu
WEB
IQ Streaming
PDF REPORTS
Instrument Messages and Troubleshooting
Introduction
Self-Test Messages
File Management Messages
Informational Messages
Warning Messages
Error Messages
System Recovery
Introduction
Reset
Boot Order
Install SW to SLOT X
UDP Discovery Tool Firewall Settings
System Override
Software Option Upgrades
Introduction
Exporting a Software Configuration File
Importing Software License
Software Update
Installing the Software
ARRT Software
Introduction
PC Configuration Requirements
Installation
Connecting to the MS2070A/80A or Simulation Mode
System Menu
System Information
Files (File Management)
File Transfer
Tools Menu
Working with Simulation Mode
Measurement Setup Parameters
FILE (File Management)
Secure Data (Option 7)
Introduction
Installing Secure Data Option 7
Turning On Secure Display
Field Master Memory Types
Erase All User Files in Internal Memory
Recommended Usage in a Secure Environment
Spectrum Analyzer Measurement Guide
General Information
Introduction
Related Manuals
Option Descriptions
Wi-Fi (Option 5)
Preamp (Option 8)
Tracking Generator (Option 20)
Interference Analyzer (Option 24)
Zero Span IF Output (Option 89)
Gated Sweep (Option 90)
IQ Capture and Streaming (Options 124/126 and 125/127)
Coverage Mapping (Option 431)
EMF Measurement (Option 444)
AM/FM Modulation Measurement (Option 509)
Other Options and Features
Document Conventions
User Interface Navigation
Illustrations
Contacting Anritsu for Sales and Service
Spectrum Analyzer Overview
Introduction
Selecting the Applications/Modes
RF Spectrum View
Spectrogram View
Main Menu
Using Menus
Status Panel
Spectrum Analyzer Measurements
Introduction
Connecting a Signal Source
Setting Frequency Parameters
Entering Start and Stop Frequencies
Entering Center Frequency
Using Offset Frequency
Setting the Span
Zero Span IF Output (Option 89)
FREQ / SPAN Menu
GESTURES
FREQ / SPAN Menu in Zero Span
IF OUTPUT Menu (Option 89)
Setting Amplitude Parameters
Setting Amplitude Units
Setting Amplitude Reference Level
Setting Amplitude Range and Scale
Reference Level Offset for External Loss or External Gain
Attenuator Functions
Preamplifier
Indications of Excessive Signal Level
Overpower Warning
AMPLITUDE Menu
Field Strength
AMPLITUDE FIELD STRENGTH Menu
Example User Antenna Data
Antenna Calculations
Setting Bandwidth Parameters
Resolution Bandwidth
Video Bandwidth
Setting Frequency Bandwidth
Setting Bandwidth Auto Coupling
BANDWIDTH Menu
Setting Trace Parameters
Traces in RF Spectrum View
Trace Math in RF Spectrum View
Trace Normalization in RF Spectrum View
TRACE Menu (Spectrum View)
Trace Detector Types
Cursors in Spectrogram View
TRACE Menu (Spectrogram View)
TRACE CURSOR Menu
Trace Recording, Playback, and CSV Logging
TRACE RECORD Menu
TRACE PLAYBACK Menu
TRACE CSV LOGGING Menu
Setting Sweep Parameters
Single/Continuous
Trace Points
Sweep Limitations
SWEEP Menu
Gated Sweep (Option 90)
GATED SWEEP
POWER VS TIME Display
GATED SWEEP ON Display
Setting Up Markers
Placing a Normal Marker
Placing a Fixed Marker
Placing a Delta Marker
MARKER Menu
MARKER PEAK SEARCH
Marker Functions
Spectrogram with Cursors and Markers
Marker Table
Setting Up Limit Lines
Simple Limit Line
Limit Line Envelope
LIMIT Menu
LIMIT EDIT
LIMIT MOVE Menu
LIMIT ENVELOPE Menu
Setting Up Triggering
TRIGGER Menu in Zero Span
Setting Up Advanced Measurements
MEASURE Menu
MEASURE Menu in Zero Span
SETUP Menu
IQ CAPTURE (Option 124/126)
IQ STREAMING (Option 125/127)
IQ TRIGGER
IQ Streaming Tool
Transmission (Option 20)
STATUS PANEL (Transmission)
SETUP Menu (Transmission)
Tracking Generator Overview
CW Generator Overview
Total Harmonic Distortion (THD)
STATUS PANEL (THD)
SETUP Menu (THD)
Channel Power
STATUS PANEL (Channel Power)
SETUP Menu (Channel Power)
Occupied Bandwidth
STATUS PANEL (Occupied BW)
SETUP Menu (Occupied BW)
Adjacent Channel Power
STATUS PANEL (ACP)
SETUP Menu (ACP)
Spectrum Emission Mask
Spectrum Emission Mask Measurement Basic Setup
STATUS PANEL (SEM)
SETUP Menu (SEM)
Example Custom Signal Emission Mask
PIM/Interference (Option 24)
STATUS PANEL (PIM/Interference)
SETUP Menu (PIM/Interference)
Electromagnetic Field (EMF) Measurements (Option 444)
Connecting the Antenna
STATUS PANEL (EMF Measurement)
SETUP Menu (EMF)
Coverage Mapping (Option 431)
Outdoor Coverage Mapping
Indoor Coverage Mapping
MEASUREMENT Menu (Coverage Mapping)
STATUS PANEL (Coverage Mapping)
SETUP Menu (Coverage Mapping)
COLOR SETUP Menu (Coverage Mapping)
Map Tool
AM/FM Audio (Requires Option 24 or Option 509)
AM/FM Audio – RF Spectrum View
SETUP Menu (AM/FM Audio RF Spectrum)
AM/FM Modulation Measurement (Option 509)
AM/FM Metrics
SETUP Menu (AM/FM Audio – All Measurements View)
STATUS PANEL (AM/FM Audio)
Carrier-to-Interference
STATUS PANEL (C/I)
SETUP Menu (C/I)
SETUP Menu
SETUP Menu (Spectrogram View)
Presetting the Analyzer
PRESET Menu
Saving and Recalling Measurements
Saving a Measurement
Recalling a Measurement
FILE Menu
IA Spectrum Analyzer (Option 24)
Introduction
Making IA Spectrum Analyzer Measurements
Initial Setup
Setting Up Advanced Measurements
MEASURE Menu
SETUP Menu (Spectrum)
Interference Map
STATUS Panel (Interference Map and Interference Polar)
SETUP Menu (Interference Map)
Interference Polar
SETUP Menu (Interference Polar)
Saving and Recalling Measurements
Saving a Measurement
Recalling a Measurement
FILE Menu
SAVE ON EVENT Menu
Real-Time Spectrum Analyzer (RTSA) Measurement Guide
General Information
Introduction
Related Manuals
Options Description
AM/FM Modulation Measurement (Option 509)
Interference Finder (Option 24)
Other Options and Features
Document Conventions
User Interface Navigation
Illustrations
Contacting Anritsu for Sales and Service
RTSA (Option 199) Overview
Introduction
Selecting the Applications/Modes
RTSA GUI Overview
RF Spectrum View
Spectrogram View
Main Menu
Using Menus
Status Panel (RTSA)
RTSA Measurements
Introduction
Making RTSA Measurements
Connecting a Signal Source
Setting Frequency Parameters
Entering Start and Stop Frequencies
Entering a Center Frequency
Using Offset Frequency
Setting the Span
FREQ / SPAN Menu
GESTURES Menu
Setting Amplitude Parameters
Setting Amplitude Units
Setting Amplitude Reference Level
Setting Amplitude Range and Scale
Reference Level Offset for External Loss or External Gain
Attenuator Functions
Preamplifier
Indications of Excessive Signal Level
Overpower Warning
AMPLITUDE Menu
Setting Bandwidth Parameters
Resolution Bandwidth
Setting Frequency Bandwidth
Setting Bandwidth Auto Coupling
BANDWIDTH Menu
Setting Trace and Cursor Parameters
Traces in RF Spectrum View
TRACE Menu (RF Spectrum View)
Trace Detector Types
Cursors in Spectrogram View
TRACE Menu (Spectrogram View)
TRACE CURSOR Menu
Trace Recording, Playback, and CSV Logging
TRACE RECORD Menu
TRACE PLAYBACK Menu
TRACE CSV LOGGING Menu
Setting Sweep Parameters
Single/Continuous
SWEEP Menu
Setting Up Markers
Placing a Normal Marker
Placing a Fixed Marker
Placing a Delta Marker
MARKER Menu
MARKER PEAK SEARCH Menu
Marker Functions
Spectrogram with Cursors and Markers
Marker Table
Setting Up Limit Lines
Simple Limit Line
Limit Line Envelope
LIMIT Menu
LIMIT EDIT Menu
LIMIT MOVE Menu
LIMIT ENVELOPE Menu
Setting Up Triggering
TRIGGER Menu
Setting Up Advanced Measurements
MEASURE Menu (RTSA)
IQ CAPTURE Menu
IQ STREAMING Menu
IQ TRIGGER Menu
IQ Streaming Tools
SETUP Menu
SETUP Menu (Spectrogram View)
Interference Finder (Option 24)
SETUP Menu (PIM/Interference)
Status Panel (PIM/Interference)
AM/FM Audio (Requires Option 24 or Option 509)
AM/FM Audio – RF Spectrum View
SETUP Menu (AM/FM Audio - RF Spectrum)
AM/FM Modulation Measurement (Option 509)
AM/FM Metrics
SETUP Menu (AM/FM Audio – All Measurements)
Status Panel (AM/FM Audio)
Presetting the Analyzer
PRESET Menu
Saving and Recalling Measurements
Saving a Measurement
Recalling a Measurement
FILE Menu
SAVE ON EVENT Menu
IA Real-Time Spectrum Analyzer (Option 24)
Introduction
Making IA RTSA Measurements
Initial Setup
Setting Up Advanced Measurements
MEASURE Menu
SETUP Menu (RTSA)
Interference Map
STATUS Panel (Interference Map and Interference Polar)
SETUP Menu (Interference Map)
Interference Polar
SETUP Menu (Interference Polar)
Saving and Recalling Measurements
Saving a Measurement
Recalling a Measurement
FILE Menu
SAVE ON EVENT Menu
5GNR Analyzer Measurement Guide
General Information
Introduction
Related Manuals
Option Descriptions
5GNR Analyzer (Option 888)
Gated Sweep (Option 90)
Coverage Mapping (Option 431)
GNSS Receiver (Option 31)
Other Options and Features
Document Conventions
User Interface Navigation
Illustrations
Contacting Anritsu for Sales and Service
5GNR Analyzer (Option 888)
Introduction
RF Measurements
Modulation Measurements
Coverage Mapping
Selecting the Analyzer
Main Menu
Using Menus
Setting Frequency and Band Parameters
Configuring the Band
FREQ SPAN Menu
BAND CONFIG Menu
GESTURES Menu
Setting Amplitude Parameters
Reference Level Offset for External Loss or External Gain
Attenuator Functions
Indications of Excessive Signal Level
Overpower Warning
AMPLITUDE Menu
Setting Bandwidth Parameters
BANDWIDTH Menu
Setting Trace Parameters
TRACE Menu
Trace Detector Types
Setting Sweep Parameters
SWEEP Menu – Summary Measurements
SWEEP Menu – RF Measurements
Gated Sweep (Option 90)
GATED SWEEP Menu
GATED SWEEP ON Display
POWER VS. TIME Display
Setting Up Markers
Placing a Normal Marker
Placing a Fixed Marker
Placing a Delta Marker
MARKER Menu
MARKER PEAK SEARCH Menu
Marker Functions
Marker Table
5GNR Measurement Setup
MEASURE Menu (5GNR)
5GNR Summary and OTA (Multi PCI)
5GNR Summary Single Beam View
5GNR Summary Multi Beam View
SIB Measurement
SIB USER MNC/MCC MAPS
5GNR Summary Table View
SETUP Menu (5GNR Summary)
Status Panel (5GNR Summary)
OTA (Multi PCI) Scanner View
OTA (Multi PCI) Table View
OTA (Multi PCI) Time Offset Table View
SETUP Menu (OTA (Multi PCI))
Status Panel (5GNR OTA (Multi PCI))
5GNR Carrier Aggregation
5GNR Carrier Aggregation View
SETUP Menu (5GNR Carrier Aggregation)
Status Panel (5GNR Carrier Aggregation)
5GNR Channel Power
SETUP Menu (5GNR Channel Power)
Status Panel (5GNR Channel Power)
5GNR Occupied Bandwidth
SETUP Menu (5GNR OBW)
Status Panel (5GNR OBW)
5GNR Adjacent Channel Power
SETUP Menu (5GNR ACP)
STATUS PANEL (ACP)
5GNR Spectrum Emission Mask
Spectrum Emission Mask Measurement Basic Setup
SETUP Menu (5GNR SEM)
Example Custom Signal Emission Mask
STATUS PANEL (5GNR SEM)
5GNR Constellation
SETUP Menu (5GNR Constellation)
Status Panel (5GNR Constellation)
5GNR EIRP
EIRP Normal View
EIRP Quick View
SETUP Menu (5GNR EIRP)
Status Panel (5GNR EIRP)
5GNR UL/DL Interference
SETUP Menu (5GNR UL/DL Interference)
Status Panel (5GNR UL/DL Interference)
5GNR Coverage Mapping (Option 431)
Outdoor Coverage Mapping
Indoor Coverage Mapping
MEASURE Menu (Coverage Mapping)
SETUP Menu (Coverage Mapping)
COLOR SETUP Menu (Coverage Mapping)
Status Panel (5GNR Coverage Mapping)
Presetting the Analyzer
PRESET Menu
Saving and Recalling Measurements
Saving a Measurement
Recalling a Measurement
FILE Menu
5GNR SIB/MIB Decode
Introduction
Downlink Control Information (DCI)
Master Information Block (MIB)
MIB Data
System Information Block (SIB)
SIB Data
Anritsu Hardware Status
LTE FDD/TDD Signal Analyzer Measurement Guide
General Information
Introduction
Related Manuals
Option Descriptions
LTE Analyzer (Option 883)
Gated Sweep (Option 90)
Coverage Mapping (Option 431)
GNSS Receiver (Option 31)
Other Options and Features
Document Conventions
User Interface Navigation
Illustrations
Contacting Anritsu for Sales and Service
LTE Analyzer (Option 883)
Introduction
Selecting the Applications/Modes
Main Menu
Using Menus
Setting Frequency and Bandwidth Parameters
Configuring the Band
FREQ SPAN Menu
SIGNAL STANDARDS Dialog
GESTURES Menu
Setting Amplitude
Setting Amplitude Parameters
Reference Level Offset for External Loss or External Gain
Attenuator Functions
Indications of Excessive Signal Level
Overpower Warning
AMPLITUDE Menu
Setting Bandwidth Parameters
BANDWIDTH Menu
Setting Trace Parameters
TRACE Menu
Trace Detector Types
Setting Sweep Parameters
SWEEP Menu – LTE Demod Summary Measurements
SWEEP Menu – LTE RF Measurements
Gated Sweep (Option 90)
GATED SWEEP Menu
GATED SWEEP ON Display
POWER VS. TIME Display
Setting Up Markers
Placing a Normal Marker
Placing a Fixed Marker
Placing a Delta Marker
MARKER Menu
MARKER PEAK SEARCH Menu
Marker Functions
Marker Table
LTE Measurement Setup
MEASURE Menu (LTE)
LTE Demod Summary
LTE Summary View
SIB Measurement
SIB USER MNC/MCC MAPS
LTE Time Alignment Error (TAE) View
LTE Resource Block (RB) Power View
LTE Summary Table View
SETUP Menu (LTE Demod Summary)
Status Panel (LTE Demod Summary)
LTE Multi PCI
SETUP Menu (LTE Multi PCI)
Status Panel (LTE Multi PCI)
LTE Channel Power
SETUP Menu (LTE Channel Power)
Status Panel (LTE Channel Power)
LTE Channel Spectrum
SETUP Menu (LTE Channel Spectrum)
Status Panel (LTE Channel Spectrum)
LTE Carrier Aggregation
SETUP Menu (LTE Carrier Aggregation)
Status Panel (LTE Carrier Aggregation)
LTE Adjacent Channel Power
SETUP Menu (LTE ACP)
STATUS PANEL (LTE ACP)
LTE Spectrum Emission Mask
Spectrum Emission Mask Measurement Basic Setup
SETUP Menu (LTE SEM)
Example Custom Signal Emission Mask
STATUS PANEL (LTE SEM)
LTE Control Channel
SETUP Menu (LTE Control Channel)
Status Panel (LTE Control Channel)
LTE Constellation
SETUP Menu (LTE Constellation)
Status Panel (LTE Constellation)
LTE UL/DL Interference
SETUP Menu (LTE UL/DL Interference)
Status Panel (LTE UL/DL Interference)
LTE Coverage Mapping (Option 431)
Outdoor Coverage Mapping
Indoor Coverage Mapping
MEASURE Menu (Coverage Mapping)
SETUP Menu (LTE Coverage Mapping)
COLOR SETUP Menu (Coverage Mapping)
Status Panel (LTE Coverage Mapping)
Presetting the Analyzer
PRESET Menu
Saving and Recalling Measurements
Saving a Measurement
Recalling a Measurement
FILE Menu
LTE MIB/SIB Decode
Introduction
Downlink Control Information (DCI)
Master Information Block (MIB)
MIB Data
System Information Block (SIB)
SIB Data
Anritsu Hardware Status
WCDMA Analyzer Measurement Guide
General Information
Introduction
Related Manuals
Option Descriptions
WCDMA Analyzer (Option 871)
Gated Sweep (Option 90)
GNSS Receiver (Option 31)
Other Options and Features
Document Conventions
User Interface Navigation
Illustrations
Contacting Anritsu for Sales and Service
WCDMA Analyzer Overview (Option 871)
Introduction
Selecting the Applications/Modes
Main Menu
Using Menus
WCDMA FDD Analyzer Measurements
Introduction
RF Measurements
Modulation Measurements
Setting Frequency and Bandwidth Parameters
FREQUENCY Menu
GESTURES Menu
Setting Amplitude
Setting Amplitude Parameters
Reference Level Offset for External Loss or External Gain
Attenuator Functions
Indications of Excessive Signal Level
Overpower Warning
AMPLITUDE Menu
Setting Bandwidth Parameters
BANDWIDTH Menu
Setting Trace Parameters
Traces in WCDMA
Trace Math
Trace Normalization
TRACE Menu
Trace Detector Types
Setting Sweep Parameters
SWEEP Menu – WCDMA Demod Summary Measurements
SWEEP Menu – WCDMA RF Measurements
Setting Up Markers
Placing a Normal Marker
Placing a Fixed Marker
Placing a Delta Marker
MARKER Menu
MARKER PEAK SEARCH Menu
Marker Functions
Marker Table
WCDMA Measurement Setup
MEASURE Menu (WCDMA)
WCDMA Demod Summary
WCDMA Demod Summary View
WCDMA Summary Table View
STATUS PANEL (WCDMA Demod Summary)
SETUP MENU (WCDMA Demod Summary)
WCDMA Channel Power
SETUP Menu (Channel Power)
STATUS PANEL (Channel Power)
WCDMA Occupied Bandwidth
SETUP Menu (Occupied BW)
STATUS PANEL (Occupied BW)
WCDMA Adjacent Channel Power
SETUP Menu (ACP)
STATUS PANEL (ACP)
WCDMA Spectrum Emission Mask
Spectrum Emission Mask Measurement Basic Setup
SETUP Menu (SEM)
Example Custom Signal Emission Mask
STATUS PANEL (SEM)
Presetting the Analyzer
PRESET Menu
Saving and Recalling Measurements
Saving a Measurement
Recalling a Measurement
FILE Menu
Channel Scanner Measurement Guide
General Information
Introduction
Related Manuals
Option Description
Channel Scanner (Option 27)
Document Conventions
User Interface Navigation
Illustrations
Calibration and Verification
Contacting Anritsu for Sales and Service
Channel Scanner (Option 27) Overview
Introduction
Selecting the Analyzer
GUI Overview
Main Menu
Using Menus
Status Panel (Bar Chart)
Status Panel (Mapping View)
Channel Scanner Measurements
Introduction
Setting Amplitude Parameters
Setting Amplitude Units
Setting Amplitude Reference Level
Setting Amplitude Range and Scale
Reference Level Offset for External Loss or External Gain
Preamplifier
Indications of Excessive Signal Level
Overpower Warning
Field Strength
AMPLITUDE FIELD STRENGTH Menu
Example User Antenna Data
Antenna Calculations
AMPLITUDE Menu
SCAN Menu
MEASURE Menu
MEASURE Menu (Mapping View)
Bar Chart
Strip Chart
Mapping
SETUP Menu
ADD CHANNELS
SETUP Menu (Mapping View)
COLOR SETUP Menu (Mapping)
Outdoor Coverage Mapping
Indoor Coverage Mapping
PRESET Menu
FILE Menu
CSV LOGGING Menu
Saving and Recalling Measurements
Saving a Measurement
Recalling a Measurement
IQ Capture/Streaming (Option 124/126 and 125/127) Measurement Guide
General Information
Introduction
Related Manuals
Option Description
IQ Capture and Streaming (Options 124/126 and 125/127)
Other Options and Features
Document Conventions
User Interface Navigation
Illustrations
Contacting Anritsu for Sales and Service
IQ Capture/Streaming (Option 124/126 and 125/127)
Introduction
IQ Capture Block Mode
IQ Data Format
IQ Frame Structure
IQ Extended Frame
IQ Timestamps
IQ Streaming
Data Transmission to Remote User
IQ Capture/Streaming Measurement
Setting Up the Data Out Port and MA25424A
High Accuracy Power Meter Measurement Guide (HIPM) (Option19)
General Information
Introduction
Related Manuals
Option Description
Document Conventions
User Interface Navigation
Illustrations
Calibration and Verification
Contacting Anritsu for Sales and Service
High Accuracy Power Meter (Option 19) Overview
Introduction
Selecting the Applications/Modes
Main Menu
Using Menus
High Accuracy Power Meter GUI Overview
Status Panel
Status Panel (Inline Power Sensors)
HIPM Measurements
Introduction
General Measurement Setup
Example Measurement Setup
AMPLITUDE Menu
AMPLITUDE Menu (MA24103A/105A)
SWEEP Menu
SETUP Menu
SETUP Menu (inline power sensor)
ZERO/CAL Menu
LIMIT Menu
LIMIT Menu (MA24103A/105A)
Presetting the Analyzer
PRESET Menu
Saving and Recalling Measurements
Saving a Measurement
Recalling a Measurement
FILE Menu
Cable and Antenna Analyzer Measurement Guide
General Information
Introduction
Related Manuals
Option Description
Time Domain Reflectometry (TDR) Measurement (Option 3)
2-Port Transmission Measurement (Option 21)(MS2085A/89A)
Document Conventions
User Interface Navigation
Illustrations
Calibration and Verification
Contacting Anritsu for Sales and Service
Overview
Introduction
Cable and Antenna Analyzer Setup
Field Master Series Setup
Site Master Series Setup
Cable and Antenna Analyzer GUI Overview
Display Layout
Main Menu
Using Menus
Status Panel
Calibration
Introduction
Chapter Overview
Common RF Terms
Factory Calibration
CALIBRATION Menu
CALIBRATION SETUP
CAL INFO
USB CAA Info (Field Master Series Only)
Power Sensor
CALIBRATION METHODS
Calibration Mode
Calibration Status Displays
Calibration Procedure
OSL Calibration
OSL + Transmission (USB Sen) Calibration
Transmission (USB Sensor) Calibration
OSL + 2-Port Transmission Calibration (Option 21)
2-port Transmission Calibration (Option 21)
iOSL Calibration
iOSL + Transmission (USB Sensor) Calibration
iOSL + 2-Port Transmission Calibration (Option 21)
Cable and Antenna Analyzer Measurements
Introduction
Measurement Overview
Line Sweep Measurements
Setting Frequency and Distance Parameters
Setting Frequency
FREQ/DIST Menu
Setting Distance
DISTANCE Menu
DTF AID Menu
DTF SETUP Menu
Setting Amplitude Parameters
Setting the Amplitude using Top and Bottom Keys
Setting the Amplitude using Auto Scale
Setting the Amplitude using Full Scale
Amplitude Menu
Setting up a Measurement
MEASURE Menu
Return Loss Measurement
VSWR Measurement
Cable Loss Measurement
DTF Return Loss and DTF VSWR Measurement
Smith Chart Measurement
1-Port Phase Measurement
Transmission (USB Sensor) Measurement
2-Port Transmission Measurement (Option 21)
Time Domain Reflectometry (TDR) Measurements (Option 3)
Setting Sweep Parameters
DATA POINTS
RUN/HOLD
SWEEP TRIGGER
RF Immunity
SWEEP Menu
Setting Up Markers
Overview of Markers
Select, Activate, and Place a Marker / Delta Marker
Marker Table
Marker Search
Tracking Markers
Marker to Memory
MARKER Menu
MARKER SEARCH Menu
Setting Up Limit Lines
Single Limit Lines
Segmented Limit Lines
Limit Table
Limit Alarm
LIMIT Menu (Single)
LIMIT Menu (Segmented)
Setting Trace Parameters
Trace Overlay
Trace Math Example
TRACE Menu
Presetting the Analyzer
PRESET Menu
Saving and Recalling Measurements
Saving a Measurement
Recalling a Measurement
FILE Menu
Field Master MS2080A Programming Manual
Programming with SCPI
Scope of Manual
Additional Documentation
Introduction
Remote Programming Setup and Interface
Network Interface Connection and Setup
USBTMC Interface Connection and Setup
Sending SCPI Commands with NI-VISA
SCPI Command Overview
Command Names
Command Syntax
Data Parameters
Spectrum Trace Data Format
Unit Suffixes
Query Commands
Hierarchical Command Structure
SCPI Command Types
SCPI Common Commands
*CLS
*IDN?
*RST
SCPI Required Commands
SCPI Optional Commands
Status System Reporting
Status Group Registers
Status Group Reporting
SCPI Commands
SCPI Command Programming Examples
Notational Examples
Spectrum Trace Data via SCPI
C/C++
Programming Examples
MS2080A Commands
Common Commands
*CLS
*ESE <numeric_value>
*ESR?
*IDN?
*OPC
*OPT?
*RCL <numeric_value>
*RST
*SAV <numeric_value>
*SRE <numeric_value>
*STB?
*TST?
*WAI
System Commands
:DIAGnostic:MEMory?
:DISPlay:LANGuage <EN|DE|ES|ZH|JA|FR|KO|IT>
:DISPlay[:WINDow]:TEXT:STATe <0 | 1 | ON | OFF>
:FETCh:GPS?
:FETCh:GPS:ALL?
:FETCh:GPS:FULL?
:FETCh:GPS:LAST?
:INSTrument:APPLication:STATe <SPA|HIPM|CAAUSB>,<0 | 1 | ON | OFF>
:INSTrument:CATalog:ACTive?
:INSTrument:CATalog:ALL?
:INSTrument:CATalog:FULL?
:INSTrument:NSELect <numeric_value>
:INSTrument[:SELect] <SPA|HIPM|CAAUSB>
:MMEMory:CATalog:DIRectory? <string>,<string>
:MMEMory:CATalog:DIRectory:SIZE? <string>,<string>
:MMEMory:CATalog:MSUSs?
:MMEMory:CDIRectory <string>
:MMEMory:COPY <string>,<string>,<string>,<string>
:MMEMory:CREate:DIRectory <string>,<string>
:MMEMory:DATA <string>,<string>,<block data>
:MMEMory:DELete:DIRectory <string>,<string>
:MMEMory:DELete:FILe <string>,<string>
:MMEMory:EJECt <string>
:MMEMory:LOAD:STATe <numeric_value>,<string>,<string>
:MMEMory:LOAD:TRACe <string>,<string>,<string>
:MMEMory:MSIS <string>
:MMEMory:STORe:STATe <numeric_value>,<string>,<string>
:MMEMory:STORe:TRACe <string>,<string>,<string>
:OUTPut:ROSCillator:STATe <0 | 1 | ON | OFF>
[:SENSe]:BIAS:EXTernal:CURRent?
[:SENSe]:BIAS:EXTernal:STATe <0 | 1 | ON | OFF>
[:SENSe]:BIAS:EXTernal:TRIPped[:STATe]?
[:SENSe]:BIAS:EXTernal:TRIPped[:STATe]:CLEar
[:SENSe]:BIAS:EXTernal:VOLTage <numeric_value>
[:SENSe]:FREQuency:REFerence:SOURce?
[:SENSe]:RF:SAFE:MODE <0 | 1 | ON | OFF>
[:SENSe]:TIME:REFerence:SOURce?
:SYSTem:COMMunicate:LAN:CONFig <string>,[<string>],[<string>]
:SYSTem:COMMunicate:LAN:CONFig:CURRent?
:SYSTem:COMMunicate:LAN:DHCP <ON|OFF>
:SYSTem:COMMunicate:LAN:DNS <string>,<string>,<string>
:SYSTem:COMMunicate:LAN:DNSServer:APPend <string>, {<string>}, ...
:SYSTem:COMMunicate:LAN:DNSServer:DELete <string>, {<string>}, ...
:SYSTem:COMMunicate:LAN:DNSServer:LIST <string>, {<string>}, ...
:SYSTem:COMMunicate:LAN:FTP:STATe <0 | 1 | ON | OFF>
:SYSTem:COMMunicate:LAN:HOSTname <string>
:SYSTem:COMMunicate:LAN:HTTP:SECure:STATe <0 | 1 | ON | OFF>
:SYSTem:COMMunicate:LAN:SECure:CREDentials <string>,<string>,<RSA>
:SYSTem:COMMunicate:LAN:SECure:SSLCertificate?
:SYSTem:COMMunicate:WLAN:CONFig:CURRent?
:SYSTem:COMMunicate:WLAN:CONNection <string>,[<string>]
:SYSTem:COMMunicate:WLAN:CONNection:ACTive?
:SYSTem:COMMunicate:WLAN:CONNection:DISConnect
:SYSTem:COMMunicate:WLAN:CONNection:FORGet <string>
:SYSTem:COMMunicate:WLAN:CONNection:FORGet:ALL
:SYSTem:COMMunicate:WLAN:CONNection:SAVed?
:SYSTem:COMMunicate:WLAN:CONNection:STATus?
:SYSTem:COMMunicate:WLAN:NETWorks?
:SYSTem:COMMunicate:WLAN:NETWorks:REFResh
:SYSTem:COMMunicate:WLAN:STATe <0 | 1 | ON | OFF>
:SYSTem:DATE <numeric_value>,<numeric_value>,<numeric_value>
:SYSTem:DEFault:RESet:ALL
:SYSTem:DEFault:RESet:DATA <USER|SYSTem>
:SYSTem:DEFault:RESet:FACTory
:SYSTem:ERRor:DISPlay <0 | 1 | ON | OFF>
:SYSTem:ERRor[:NEXT]?
:SYSTem:FIRMware:UPDate <string>,<string>
:SYSTem:FIRMware:UPDate:LIST?
:SYSTem:FIRMware:UPDate:REMote <string>
:SYSTem:FIRMware:UPDate:REMote:AUTO <0 | 1 | ON | OFF>
:SYSTem:FIRMware:UPDate:REMote:LATest?
:SYSTem:FIRMware:UPDate:REMote:LIST?
:SYSTem:FIRMware:UPDate:REMote:LIST:REFResh
:SYSTem:FIRMware:UPDate:REMote:SOURce <string>
:SYSTem:FIRMware:VERSion?
:SYSTem:GPS:SEARch:MODE <GGLonass|GGALileo|GBEidou|GGGalileo>
:SYSTem:GPS:STATe <0 | 1 | ON | OFF>
:SYSTem:GPS:VOLTage <numeric_value>
:SYSTem:LOG:ERRor?
:SYSTem:MACaddress?
:SYSTem:OPTions?
:SYSTem:OPTions:ALL?
:SYSTem:OPTions:CONFig?
:SYSTem:OPTions:TIMed:ACTivate <string>
:SYSTem:OPTions:UPDate:REMote
:SYSTem:OPTions:UPGRade <string>
:SYSTem:PASSword:CDISable <string>
:SYSTem:PASSword:CENable <string>
:SYSTem:PASSword:CENable:ALL <string>
:SYSTem:PASSword:CONNection:STATe?
:SYSTem:PASSword:INTegrity?
:SYSTem:PASSword:NEW <string>,<string>
:SYSTem:PASSword:SET?
:SYSTem:PASSword:SSLKey?
:SYSTem:PASSword:STATe?
:SYSTem:PRESet
:SYSTem:PRESet:MODE
:SYSTem:REBoot
:SYSTem:REMote:DISPlay:LOCK <0 | 1 | ON | OFF>
:SYSTem:SETup:SHORtcuts <numeric_value>,<string>,[<string>]
:SYSTem:SETup:SHORtcuts:CLEar
:SYSTem:SETup:SHORtcuts:DEL <numeric_value>
:SYSTem:SETup:SHORtcuts:LOAD <numeric_value>
:SYSTem:SETup:SHORtcuts:REName <numeric_value>,<string>
:SYSTem:SHUTdown
:SYSTem:TEMPerature?
:SYSTem:TIME <numeric_value>,<numeric_value>,<numeric_value>
:SYSTem:TIME:SYNC <AUTO|MANual>
:SYSTem:TIME:SYNC:STATus?
:SYSTem:TIME:ZONE <string>
:SYSTem:TIME:ZONE:CATalog?
:SYSTem:UNIT:NAMe <string>
:TEST:SELFtest?
:TRIGger[:SEQuence]:PORT<n>[:DIRection] <IN|OUT>
Spectrum Analyzer Commands
:ABORt
:CALCulate:LIMit<n>:COMMent <string>
:CALCulate:LIMit<n>:CONTrol[:DATA] <numeric_value> {HZ | KHZ | MHZ | GHZ}, {<numeric_value> {HZ | KHZ | MHZ | GHZ}}, ...
:CALCulate:LIMit<n>:CONTrol:MODE <ABSolute|RELative>
:CALCulate:LIMit<n>:CONTrol:SHIFt <numeric_value> {HZ | KHZ | MHZ | GHZ}
:CALCulate:LIMit<n>:COPY <numeric_value>
:CALCulate:LIMit<n>:DELete
:CALCulate:LIMit<n>:FAIL?
:CALCulate:LIMit<n>:LOWer[:DATA] <numeric_value> {<amplitude_units>}, {<numeric_value> {<amplitude_units>}}, ...
:CALCulate:LIMit<n>:LOWer:MODE <ABSolute|RELative>
:CALCulate:LIMit<n>:LOWer:SHIFt <numeric_value> {DB}
:CALCulate:LIMit<n>:LOWer:STATe <0 | 1 | ON | OFF>
:CALCulate:LIMit<n>:NAME <string>
:CALCulate:LIMit<n>:STATe <0 | 1 | ON | OFF>
:CALCulate:LIMit<n>:TRACe<n>:CHECk <0 | 1 | ON | OFF>
:CALCulate:LIMit<n>:UPPer[:DATA] <numeric_value> {<amplitude_units>}, {<numeric_value> {<amplitude_units>}}, ...
:CALCulate:LIMit<n>:UPPer:MODE <ABSolute|RELative>
:CALCulate:LIMit<n>:UPPer:SHIFt <numeric_value> {DB}
:CALCulate:LIMit<n>:UPPer:STATe <0 | 1 | ON | OFF>
:CALCulate:LIMit:ACTive?
:CALCulate:ACPower:LIMit:ADJacent:ABSolute <numeric_value> {<amplitude_units>}
:CALCulate:ACPower:LIMit:ADJacent:LOWer:FAIL?
:CALCulate:ACPower:LIMit:ADJacent:RELative <numeric_value> {DB}
:CALCulate:ACPower:LIMit:ADJacent:UPPer:FAIL?
:CALCulate:ACPower:LIMit:ALTernate:ABSolute <numeric_value> {<amplitude_units>}
:CALCulate:ACPower:LIMit:ALTernate:LOWer:FAIL?
:CALCulate:ACPower:LIMit:ALTernate:RELative <numeric_value> {DB}
:CALCulate:ACPower:LIMit:ALTernate:UPPer:FAIL?
:CALCulate:ACPower:LIMit:FAIL?
:CALCulate:ACPower:LIMit:MAIN <numeric_value> {<amplitude_units>}
:CALCulate:ACPower:LIMit:MODE <ABSolute|RELative>
:CALCulate:ACPower:LIMit:STATe <0 | 1 | ON | OFF>
:CALCulate:CHPower:LIMit <numeric_value> {<amplitude_units>}
:CALCulate:CHPower:LIMit:FAIL?
:CALCulate:CHPower:LIMit:PSDensity <numeric_value> {<amplitude_units>}
:CALCulate:CHPower:LIMit:PSDensity:STATe <0 | 1 | ON | OFF>
:CALCulate:CHPower:LIMit:PSD:FAIL?
:CALCulate:CHPower:LIMit:STATe <0 | 1 | ON | OFF>
:CALCulate:CINTerference:CARrier:LIMit <numeric_value> {<amplitude_units>}
:CALCulate:CINTerference:CARrier:LIMit:FAIL?
:CALCulate:CINTerference:CARrier:LIMit:STATe <0 | 1 | ON | OFF>
:CALCulate:CINTerference:CIRatio:LIMit <numeric_value> {DB}
:CALCulate:CINTerference:CIRatio:LIMit:FAIL?
:CALCulate:CINTerference:CIRatio:LIMit:STATe <0 | 1 | ON | OFF>
:CALCulate:CINTerference:INTerference:LIMit <numeric_value> {<amplitude_units>}
:CALCulate:CINTerference:INTerference:LIMit:FAIL?
:CALCulate:CINTerference:INTerference:LIMit:STATe <0 | 1 | ON | OFF>
:CALCulate:EIRPower:HORizontal:LIMit:FAIL?
:CALCulate:EIRPower:HORizontal:SAVE
:CALCulate:EIRPower:LIMit:FAIL?
:CALCulate:EIRPower:LIMit:LOWer <numeric_value> {<amplitude_units>}
:CALCulate:EIRPower:LIMit:LOWer:STATe <0 | 1 | ON | OFF>
:CALCulate:EIRPower:LIMit:UPPer <numeric_value> {<amplitude_units>}
:CALCulate:EIRPower:LIMit:UPPer:STATe <0 | 1 | ON | OFF>
:CALCulate:EIRPower:MAXimum:LIMit:FAIL?
:CALCulate:EIRPower:SUM:LIMit:FAIL?
:CALCulate:EIRPower:VERTical:LIMit:FAIL?
:CALCulate:EIRPower:VERTical:SAVE
:CALCulate:INTerference:LIMit <numeric_value> {<amplitude_units>}
:CALCulate:INTerference:LIMit:FAIL?
:CALCulate:INTerference:LIMit:STATe <0 | 1 | ON | OFF>
:CALCulate:LIMit<n>:ENVelope:UPDate:Y
:CALCulate:LIMit<n>:LOWer:ENVelope:CREate
:CALCulate:LIMit<n>:LOWer[:TRACe]:POINts?
:CALCulate:LIMit<n>:UPPer:ENVelope:CREate
:CALCulate:LIMit<n>:UPPer[:TRACe]:POINts?
:CALCulate:LIMit:ALARm <0 | 1 | ON | OFF>
:CALCulate:LIMit:ENVelope:OFFSet <numeric_value> {<amplitude_units>}
:CALCulate:LIMit:ENVelope:POINt <numeric_value>
:CALCulate:LIMit:ENVelope:SHAPe <SQUare|SLOPe>
:CALCulate:MARKer<n>:FUNCtion <OFF|NOISe|FCOunter|QUASi>
:CALCulate:MARKer<n>:MAXimum
:CALCulate:MARKer<n>:MAXimum:LEFT
:CALCulate:MARKer<n>:MAXimum:NEXT
:CALCulate:MARKer<n>:MAXimum:RIGHt
:CALCulate:MARKer<n>:MODE <POSition|DELTa|FIXed>
:CALCulate:MARKer<n>:MOVE:LEFT
:CALCulate:MARKer<n>:MOVE:RIGHt
:CALCulate:MARKer<n>:REFerence <numeric_value>
:CALCulate:MARKer<n>[:SET]:CENTer
:CALCulate:MARKer<n>[:SET]:RLEVel
:CALCulate:MARKer<n>:STATe <0 | 1 | ON | OFF>
:CALCulate:MARKer<n>:TRACe <numeric_value>
:CALCulate:MARKer<n>:X <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:CALCulate:MARKer<n>:X <numeric_value> {HZ | KHZ | MHZ | GHZ}
:CALCulate:MARKer<n>:Y <numeric_value> {<amplitude_units>}
:CALCulate:MARKer:AOFF
:CALCulate:MARKer:APReset
:CALCulate:MARKer[:DATA]:ALL?
:CALCulate:MARKer:FUNCtion:FCOunter:RESolution <R0|R1|R2|R3>
:CALCulate:MARKer:PEAK:EXCursion <numeric_value> {DB}
:CALCulate:MARKer:PEAK:EXCursion:STATe <0 | 1 | ON | OFF>
:CALCulate:MARKer:PEAK:THReshold <numeric_value> {<amplitude_units>}
:CALCulate:MARKer:PEAK:THReshold:STATe <0 | 1 | ON | OFF>
:CALCulate:OBW:LIMit <numeric_value> {HZ | KHZ | MHZ | GHZ}
:CALCulate:OBW:LIMit:FAIL?
:CALCulate:OBW:LIMit:STATe <0 | 1 | ON | OFF>
:CONFigure:ACPower
:CONFigure:CHPower
:CONFigure:CINTerference
:CONFigure:EIRPower
:CONFigure:INTerference
:CONFigure:OBWidth
:CONFigure:SEMask
:CONFigure:USER:CARRiers[:STATe] <0 | 1 | ON | OFF>
:CONFigure:USER:COUNtries[:STATe] <0 | 1 | ON | OFF>
:CSCanner:ADD:CUSTom <numeric_value> {HZ | KHZ | MHZ | GHZ},<numeric_value> {HZ | KHZ | MHZ | GHZ},[<numeric_value>],[<string>],[<numeric_value> {PS | NS | US | MS | S | MIN | HR}],[<numeric_value> {<amplitude_units>}],[<numeric_value> {<amplitude_units>}]
:CSCanner:ADD:FREQuency <numeric_value> {HZ | KHZ | MHZ | GHZ},<numeric_value> {HZ | KHZ | MHZ | GHZ},<numeric_value> {HZ | KHZ | MHZ | GHZ},<numeric_value>,[<numeric_value>],[<string>],[<numeric_value> {PS | NS | US | MS | S | MIN | HR}],[<numeric_value> {<amplitude_units>}],[<numeric_value> {<amplitude_units>}]
:CSCanner:ADD:SIGnalstandard <string>,<numeric_value>,<numeric_value>,<numeric_value>,[<numeric_value>],[<numeric_value> {HZ | KHZ | MHZ | GHZ}],[<numeric_value> {PS | NS | US | MS | S | MIN | HR}],[<numeric_value> {<amplitude_units>}],[<numeric_value> {<amplitude_units>}]
:CSCanner:AVERage:TYPE <LAST|MAX|MIN|AVER|RMAX|RMIN|RAV>
:CSCanner:CHANnel?
:CSCanner:CHANnel:LIMit?
:CSCanner:CLEar <numeric_value>
:CSCanner:CLEar:ALL
:CSCanner:DELete <numeric_value>
:CSCanner:DELete:ALL
:CSCanner:EDIT:CUSTom <numeric_value> {HZ | KHZ | MHZ | GHZ},<numeric_value> {HZ | KHZ | MHZ | GHZ},<numeric_value>,[<string>],[<numeric_value> {PS | NS | US | MS | S | MIN | HR}],[<numeric_value> {<amplitude_units>}],[<numeric_value> {<amplitude_units>}]
:CSCanner:EDIT:SIGnalstandard <string>,<numeric_value>,<numeric_value>,[<numeric_value> {HZ | KHZ | MHZ | GHZ}],[<numeric_value> {PS | NS | US | MS | S | MIN | HR}],[<numeric_value> {<amplitude_units>}],[<numeric_value> {<amplitude_units>}]
:CSCanner:LOG <0 | 1 | ON | OFF>
:CSCanner:LOG:INTerval <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:CSCanner:RESults? [<ALL|STRip|BAR>],[<numeric_value>]
:CSCanner:SORT:ASC <CFR|BWID|DTIM|LIMI|LAST|MAX|MIN|AVER|RMAX|RMIN|RAV>
:CSCanner:SORT:DESC <CFR|BWID|DTIM|ULIM|LLIM|LAST|MAX|MIN|AVER|RMAX|RMIN|RAV>
:CSCanner:SSTandard:ATTRibutes? <string>
:CSCanner:SSTandard:CATalog?
:CSCanner:UPDate:STATe <0 | 1 | ON | OFF>
:DIAGnostic:SWEep:TIME?
:DISPlay:EXTernal:DEVices?
:DISPlay:IMPedance:MATCh:DEVice <NONe|M75|OTHer>
:DISPlay:IMPedance:MATCh:DEVice:CUSTom:LOSS <numeric_value> {DB}
:DISPlay:POINtcount <numeric_value>
:DISPlay:VIEW:SPECtrogram:AADJust
:DISPlay:VIEW:SPECtrogram:BOTTom <numeric_value> {<amplitude_units>}
:DISPlay:VIEW:SPECtrogram:HISTory[:DATA]? <numeric_value>
:DISPlay:VIEW:SPECtrogram:HISTory:ELAPsed? <numeric_value>
:DISPlay:VIEW:SPECtrogram:HUE <numeric_value>
:DISPlay:VIEW:SPECtrogram:REFerence <numeric_value> {<amplitude_units>}
:DISPlay:VIEW:SPECtrogram:TRACe:SELection <POSition|TIME>
:DISPlay:WINDow:TRACe:Y[:SCALe]:PDIVision <numeric_value>
:DISPlay:WINDow:TRACe:Y[:SCALe]:PDIVision <numeric_value>
:DISPlay[:WINDow]:TRACe:Y:SCALe:RLEVel <numeric_value> {<amplitude_units>}
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:RLEVel:AUTO[:IMMediate] <numeric_value> {DB}
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:RLEVel:OFFSet <numeric_value> {DB}
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:RLEVel:OFFSet <numeric_value> {DB}
:DISPlay[:WINDow]:TRACe:Y:SSCale:PDIVision <numeric_value> {DB}
:DISPlay[:WINDow]:TRACe:Y:SSCale:PDIVision <numeric_value> {DB}
:DISPlay[:WINDow]:TRACe:Y:SSCale:RLEVel <numeric_value> {DB}
:DISPlay[:WINDow]:TRACe:Y:SSCale:RLEVel <numeric_value> {DB}
:EMF:STORe:PATH <string>
:FETCh:ACPower?
:FETCh:AMPLitude? <numeric_value> {HZ | KHZ | MHZ | GHZ}
:FETCh:BPOWer?
:FETCh:CAGGregation?
:FETCh:CHPower?
:FETCh:CHPower:CHPower?
:FETCh:CHPower:DENSity?
:FETCh:CINTerference?
:FETCh:CINTerference:CIRAtio?
:FETCh:CINTerference:CPOWer?
:FETCh:CINTerference:IPOWer?
:FETCh:CONStellation:PBCH?
:FETCh:CONStellation:PDSCh?
:FETCh:CONTrol?
:FETCh[:DATA]:ALL? [<ASCii|INTeger|REAL>],[<numeric_value>]
:FETCh:DENSity:DATA? <numeric_value>
:FETCh:EIRPower?
:FETCh:EIRPower:DATA?
:FETCh:EIRPower:MAXimum?
:FETCh:EMF?
:FETCh:FRAMe:POWer?
:FETCh:INTerference:POWer?
:FETCh:MIMO:ANTennas?
:FETCh:OBWidth<n>?
:FETCh:OTA:MAPPing?
:FETCh:PCI?
:FETCh:PDSCh?
:FETCh:PEAK?
:FETCh:RRM?
:FETCh:SCANner?
:FETCh:SEMask?
:FETCh:SSB?
:FETCh:SYNC:EVM?
:FETCh:SYNC:POWer?
:FETCh:TAE?
:FETCh:TRACe:STAT?
:FETCh:WCDMa:SYNC?
:FORMat[:TRACe][:DATA] <ASCii|INTeger|REAL>,[<numeric_value>]
:FRAMe:SPECtrum:TRACe:DISPlay[:STATe] <0 | 1 | ON | OFF>
:FRAMe:SPECtrum:TRACe:TYPE <NORMal|MINimum|MAXimum|AVERage|RMAXimum|RMINimum|RAVerage|MATH>
:FRAMe:SPECtrum:TRACe:UPDate[:STATe] <0 | 1 | ON | OFF>
:FRAMe:TDOMain:TRACe:DISPlay[:STATe] <0 | 1 | ON | OFF>
:FRAMe:TDOMain:TRACe:TYPE <NORMal|MINimum|MAXimum|AVERage|RMAXimum|RMINimum|RAVerage|MATH>
:FRAMe:TDOMain:TRACe:UPDate[:STATe] <0 | 1 | ON | OFF>
:INITiate:CONTinuous <0 | 1 | ON | OFF>
:INITiate[:IMMediate]
:INITiate[:IMMediate]:ALL
:INITiate:SPA:SELFtest?
:INPut:OPOWer:RELay[:STATe] <CLOSed>
:INSTrument:ACTive:STATe <0 | 1 | ON | OFF>
:INSTrument:REMote:STATe <0 | 1 | ON | OFF>,<string>
:MEASure:ACPower?
:MEASure:CHPower?
:MEASure:CHPower:CHPower?
:MEASure:CHPower:DENSity?
:MEASure:CINTerference:CANCel
:MEASure:CINTerference:CONTinue
:MEASure:INTerference:POWer?
:MEASure:IQ:CAPTure [<PPS>]
:MEASure:IQ:CAPTure:FAIL <OFF|FIRSt|REPeat>
:MEASure:OTA:MAPPing?
:MEASure:OTA:MAPPing:RUN <0 | 1 | ON | OFF>
:MMEMory:COEvent:CLEarall
:MMEMory:COEvent:TIMer:INTerval <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:MMEMory:EMF:STORe:LOG <string>
:MMEMory:LOAD:LIMit <string>,<string>,<string>
:MMEMory:LOAD:MAP <string>
:MMEMory:LOAD[:OTA]:MAPPing:KML <string>,<string>,<string>
:MMEMory:LOAD:RAM <numeric_value>,<numeric_value>,<string>
:MMEMory:LOAD:RECord <string>,<string>
:MMEMory:LOAD:SEMask:CUSTom <string>,<string>
:MMEMory:STOEvent:CLEarall
:MMEMory:STOEvent:EOSWeep:MODE <CONTinuous|SINGle>
:MMEMory:STOEvent:EOSWeep[:STATe] <0 | 1 | ON | OFF>
:MMEMory:STOEvent:LIMit:INTerval <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:MMEMory:STOEvent:LIMit:MODE <CONTinuous|SINGle|INTerval>
:MMEMory:STOEvent:LIMit:PTRigger[:STATe] <0 | 1 | ON | OFF>
:MMEMory:STOEvent:LIMit[:STATe] <0 | 1 | ON | OFF>
:MMEMory:STOEvent:TIMer:INTerval <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:MMEMory:STOEvent:TIMer[:STATe] <0 | 1 | ON | OFF>
:MMEMory:STORe:CAPTure
:MMEMory:STORe:CAPTure:MODE <AUTomatic|MANual>
:MMEMory:STORe:CAPTure:MSUS <string>
:MMEMory:STORe:CAPTure:PATH <string>
:MMEMory:STORe:CAPTure:PREFix <string>
:MMEMory:STORe:CSCanner:CSV:MSUS <string>
:MMEMory:STORe:CSCanner:CSV:PATH <string>
:MMEMory:STORe:LIMit <string>,<string>,<string>
:MMEMory:STORe[:OTA]:MAPPing:CSV <string>,<string>,<string>
:MMEMory:STORe[:OTA]:MAPPing:KML <string>,<string>,<string>
:MMEMory:STORe:RAM <numeric_value>,<numeric_value>,<string>
:MMEMory:STORe:RECord:CSV:DISCard
:MMEMory:STORe:RECord:CSV:MSUS <string>
:MMEMory:STORe:RECord:CSV:PATH <string>
:MMEMory:STORe:RECord:CSV:PREFix <string>
:MMEMory:STORe:RECord:MSUS <string>
:MMEMory:STORe:RECord:PATH <string>
:MMEMory:STORe:RECord:PREFix <string>
:MMEMory:STORe:STREam:MSUS <string>
:MMEMory:STORe:STREam:PATH <string>
:MMEMory:STORe:TRACe:CSV <string>,<string>,<string>
:OUTPut[:STATe] <0 | 1 | ON | OFF>
:READ:ACPower?
:READ:CHPower?
:READ:CHPower:CHPower?
:READ:CHPower:DENSity?
:READ:EIRPower?
:READ:EIRPower:DATA?
:READ:EIRPower:MAXimum?
:READ:INTerference:POWer?
:READ:OTA:MAPPing?
:READ:SEMask?
[:SENSe]:ACPower:BANDwidth|BWIDth:ADJacent <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:ACPower:BANDwidth|BWIDth:ALTernate <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:ACPower:BANDwidth|BWIDth:MAIN <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:ACPower:BANDwidth|BWIDth:SPACing <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:ACPower:STATe <0 | 1 | ON | OFF>
[:SENSe]:AMFM:AUDio:RECord
[:SENSe]:AMFM:AUDio:RECord:DURation <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:AMFM:AUDio:RESults?
[:SENSe]:AMFM:AUDio:STATe <0 | 1 | ON | OFF>
[:SENSe]:AMFM:DEMod:BWIDth?
[:SENSe]:AMFM:DEMod:FREQuency <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:AMFM:DEMod:MARKer:SELect <numeric_value>
[:SENSe]:AMFM:DEMod:MARKer:STATe <0 | 1 | ON | OFF>
[:SENSe]:AMFM:DEMod:TYPE <AM|USBand|LSBand|FMWideband|FMNarrowband|FM125|FM625>
[:SENSe]:AMFM:SQUelch <numeric_value> {<amplitude_units>}
[:SENSe]:AMFM:STATe <0 | 1 | ON | OFF>
[:SENSe]:ARFChannel <numeric_value>
[:SENSe]:AVERage:COUNt <numeric_value>
[:SENSe]:AVERage:TYPE <NORMal|MINimum|MAXimum|AVERage|RMAXimum|RMINimum|RAVerage|MATH>
[:SENSe]:BANDwidth|BWIDth[:RESolution] <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:BANDwidth|BWIDth[:RESolution] <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:BANDwidth|BWIDth[:RESolution]:RATio <numeric_value>
[:SENSe]:BANDwidth|BWIDth:VIDeo <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:BANDwidth|BWIDth:VIDeo <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:BANDwidth|BWIDth:VIDeo:RATio <numeric_value>
[:SENSe]:BANDwidth|BWIDth:VIDeo:TYPE <LINear|LOGarithmic>
[:SENSe]:BANDwidth[:RESolution]:AUTO <0 | 1 | ON | OFF>
[:SENSe]:BANDwidth:VIDeo:AUTO <0 | 1 | ON | OFF>
[:SENSe]:BEAM <numeric_value>
[:SENSe]:BEAM:TRACking:STATe <0 | 1 | ON | OFF>
[:SENSe]:BPOWer:END <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:BPOWer:STARt <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:BPOWer:STATe <0 | 1 | ON | OFF>
[:SENSe]:CAGGregation?
[:SENSe]:CAGGregation:CARRier:ACTive <numeric_value>
[:SENSe]:CAGGregation:CARRier:COUNt <numeric_value>
[:SENSe]:CAGGregation:STATe <0 | 1 | ON | OFF>
[:SENSe]:CBWidth <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:CBWidth <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:CBWidth:CATalog?
[:SENSe]:CCHannel:STATe <0 | 1 | ON | OFF>
[:SENSe]:CHANnel:SCSPacing:CATalog?
[:SENSe]:CHPower:BANDwidth|BWIDth:INTegration <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:CHPower:STATe <0 | 1 | ON | OFF>
[:SENSe]:CINTerference:BANDwidth|BWIDth:INTegration <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:CINTerference:CARRier:STATe?
[:SENSe]:CINTerference:STATe <0 | 1 | ON | OFF>
[:SENSe]:CLOCk:ADJust <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:CONStellation <PBCH|PDSCh>
[:SENSe]:CONStellation:PBCH?
[:SENSe]:CONStellation:PBCH:BEAM <numeric_value>
[:SENSe]:CONStellation:PDSCh?
[:SENSe]:CONStellation:REFerence:STATe <0 | 1 | ON | OFF>
[:SENSe]:CONStellation:STATe <0 | 1 | ON | OFF>
[:SENSe]:CYCLicprefix <NORMal|EXTended|AUTO>
[:SENSe]:CYCLicprefix <NORMal|EXTended|AUTO>
[:SENSe]:DEMod:DISCard:CSV
[:SENSe]:DEMod:GATE:DURation <COUPled|FRAMe>
[:SENSe]:DEMod:GATE:SPECtrum:TYPe <UPLink|DWLink|FLEXible|GP|ALL|NONe>
[:SENSe]:DEMod:LOG <LOG|PAUSe|STOP>
[:SENSe]:DEMod:STORe:MSUS <string>
[:SENSe]:DEMod:STORe:PATH <string>
[:SENSe]:DENSity:ACQuisition <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:DENSity:CSCale:AUTO <0 | 1 | ON | OFF>
[:SENSe]:DENSity:CSCale:HIGH <numeric_value>
[:SENSe]:DENSity:CSCale:LOW <numeric_value>
[:SENSe]:DENSity:DETection:MINimum?
[:SENSe]:DENSity:DISPlay:RESolution <NORMal|HIGH>
[:SENSe]:DENSity:FFT:COUNt?
[:SENSe]:DENSity:PERSistence <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:DENSity:PERSistence:CLEar
[:SENSe]:DENSity:PERSistence:STATe <VARiable|INFinite>
[:SENSe]:DENSity:POI?
[:SENSe]:DENSity:STATe <0 | 1 | ON | OFF>
[:SENSe]:DETector[:FUNCtion] <POSitive|RMS|NEGative|SAMPle|NORMal>
[:SENSe]:DF:INFormation?
[:SENSe]:DUPLex <FDD|TDD>
[:SENSe]:EARFchannel <numeric_value>
[:SENSe]:EIRPower:CLOSs <numeric_value> {DB}
[:SENSe]:EIRPower:DISTance <numeric_value>
[:SENSe]:EIRPower:DISTance:UNIT <METers|FEET>
[:SENSe]:EIRPower:MAXimum:COUNt?
[:SENSe]:EIRPower:MAXimum:RESet
[:SENSe]:EIRPower:PLOSs?
[:SENSe]:EIRPower:RAGain <numeric_value> {DB}
[:SENSe]:EIRPower:STATe <0 | 1 | ON | OFF>
[:SENSe]:EIRPower:SUM:RESet
[:SENSe]:EIRPower:TAGain <numeric_value> {DB}
[:SENSe]:EMF:AXIS <X|Y|Z>
[:SENSe]:EMF:AXIS:TIME <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:EMF:ICNirp?
[:SENSe]:EMF:ICNirp:STATe <0 | 1 | ON | OFF>
[:SENSe]:EMF:LOG <0 | 1 | ON | OFF>
[:SENSe]:EMF:MEASurement:COUNt <numeric_value>
[:SENSe]:EMF:MEASurement:TIME <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:EMF:RUN <0 | 1 | ON | OFF>
[:SENSe]:EMF:STATe <0 | 1 | ON | OFF>
[:SENSe]:FETch:THD?
[:SENSe]:FPAView <FRAMe|SUBFrame|SLOT>
[:SENSe]:FRAMe:POWer:STATe <0 | 1 | ON | OFF>
[:SENSe]:FREQuency:CENTer <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:FREQuency:CENTer:SHARe <0 | 1 | ON | OFF>
[:SENSe]:FREQuency:LIMit?
[:SENSe]:FREQuency:OFFSet <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:FREQuency:SPAN <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:FREQuency:SPAN:FULL
[:SENSe]:FREQuency:SPAN:LAST
[:SENSe]:FREQuency:STARt <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:FREQuency:STEP[:INCRement] <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:FREQuency:STOP <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:FREQuency:SWEep:TIME <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:FREQuency:SWEep:TIMe:AUTO <0 | 1 | ON | OFF>
[:SENSe]:FSTRength:ANTenna <string>
[:SENSe]:FSTRength:ANTenna:FACTor?
[:SENSe]:FSTRength:ANTenna:FILE <block data>
[:SENSe]:FSTRength:ANTenna:LIST?
[:SENSe]:FSTRength:ANTenna:LIST:USER?
[:SENSe]:FSTRength:STATe <0 | 1 | ON | OFF>
[:SENSe]:FSTRength:STATe <0 | 1 | ON | OFF>
[:SENSe]:GATE:DELay <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:GATE:DLSLots[:ONE] <numeric_value>
[:SENSe]:GATE:DLSLots:TWO <numeric_value>
[:SENSe]:GATE:DLSYmbols[:ONE] <numeric_value>
[:SENSe]:GATE:DLSYmbols:TWO <numeric_value>
[:SENSe]:GATE:FRAMe:OFFSet <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:GATE:FRAMe:STARttime <AUTO|SYNO|UTC|UTC3pos|UTC2neg|CUSTom>
[:SENSe]:GATE:FRAMe:STARttime:FORCe
[:SENSe]:GATE:FRAMestructure <A|B1|B2|CUSTom>
[:SENSe]:GATE:FRAMestructure:SSTYpe <TYP1|TYP2>
[:SENSe]:GATE:LENGth <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:GATE:PERiod <P1s|P20ms|P10ms>
[:SENSe]:GATE:PERIodicity[:ONE] <M0P5|M0P625|M1P0|M1P25|M2P0|M2P5|M3P0|M4P0|M5P0|M10P0|NONE>
[:SENSe]:GATE:PERIodicity:TWO <M0P5|M0P625|M1P0|M1P25|M2P0|M2P5|M3P0|M4P0|M5P0|M10P0|NONE>
[:SENSe]:GATE:STATe <0 | 1 | ON | OFF>
[:SENSe]:GATE:TRIGger <GPS|EXT>
[:SENSe]:GATE:ULSLots[:ONE] <numeric_value>
[:SENSe]:GATE:ULSLots:TWO <numeric_value>
[:SENSe]:GATE:ULSYmbols[:ONE] <numeric_value>
[:SENSe]:GATE:ULSYmbols:TWO <numeric_value>
[:SENSe]:GSCNumber <numeric_value>
[:SENSe]:INTerference:BANDwidth|BWIDth:INTegration <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:INTerference:MAX <numeric_value> {<amplitude_units>}
[:SENSe]:INTerference:MIN <numeric_value> {<amplitude_units>}
[:SENSe]:INTerference:STATe <0 | 1 | ON | OFF>
[:SENSe]:IQ:BITS <F32|I32|I16|A16|I10|I8>
[:SENSe]:IQ:CONCatenate[:STATe] <0 | 1 | ON | OFF>
[:SENSe]:IQ:DISCard
[:SENSe]:IQ:FPGA:SWITch <PCIe|IQC>
[:SENSe]:IQ:LENGth <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:IQ:LENGth:MAX?
[:SENSe]:IQ:MEMory?
[:SENSe]:IQ:MEMory:STREam?
[:SENSe]:IQ:METadata?
[:SENSe]:IQ:MODE <SINGle|STREam|CONTinuous>
[:SENSe]:IQ:PORT <DATaout|USB|ETHernet>
[:SENSe]:IQ:PORT:DATAout?
[:SENSe]:IQ:SAMPle <SB6|SB7|SB8|SB9|SB10|SB11|SB12|SB13|SB14|SB15|SB16|SB17|SB18|SB19|SB20>
[:SENSe]:IQ:SAMPle:CALibration:CONFiguration?
[:SENSe]:IQ:SAMPle:CONFiguration?
[:SENSe]:IQ:SAVE:PROGress?
[:SENSe]:IQ:SIGNing <0 | 1 | ON | OFF>
[:SENSe]:IQ:STATus?
[:SENSe]:IQ:TIMEstamps <0 | 1 | ON | OFF>
[:SENSe]:ISOTropic:AXIS <X|Y|Z|NONE>
[:SENSe]:ISOTropic:FACTors?
[:SENSe]:ISOTropic:INFOrmation?
[:SENSe]:LTE:CFI <AUTO|CFI1|CFI2|CFI3>
[:SENSe]:LTE:OBANd <INValid|UL1|DL1|UL2|DL2|UL3|DL3|UL4|DL4|UL5|DL5|UL6|DL6|UL7|DL7|UL8|DL8|UL9|DL9|UL10|DL10|UL11|DL11|UL12|DL12|UL13|DL13|UL14|DL14|UL17|DL17|UL18|DL18|UL19|DL19|UL20|DL20|UL21|DL21|UL22|DL22|UL23|DL23|UL24|DL24|UL25|DL25|UL26|DL26|UL27|DL27|UL28|DL28|DL29|UL30|DL30|UL31|DL31|DL32|UL33|DL33|UL34|DL34|UL35|DL35|UL36|DL36|UL37|DL37|UL38|DL38|UL39|DL39|UL40|DL40|UL41|DL41|UL42|DL42|UL43|DL43|UL44|DL44|UL45|DL45|UL46|DL46|UL47|DL47|UL48|DL48|UL49|DL49|UL50|DL50|UL51|DL51|UL52|DL52|UL53|DL53|UL54|DL54|UL65|DL65|UL66|DL66|DL67|UL68|DL68|DL69|UL70|DL70|UL71|DL71|UL72|DL72|UL73|DL73|UL74|DL74|DL75|DL76|UL85|DL85|UL87|DL87|UL88|DL88|U103|D103|U106|D106>
[:SENSe]:MIMO:ANTenna:PORT <AUTO|ANT0|ANT1|ANT2|ANT3>
[:SENSe]:MODE <SPECtrum|NRADio|RTSA|LTE|IASPectrum|IARTsa>
[:SENSe]:MODE:CATalog?
[:SENSe]:MODulation:REFerence?
[:SENSe]:MODulation:TYPE <ALL|QPSK|Q16|Q64|Q256>
[:SENSe]:NGFactor <ONESixth|HALF|ONE|TWO>
[:SENSe]:NRADio:MAPPing:PATTern <P1|P2|AUTO>
[:SENSe]:OBANd <INValid|GLOBal|N1|N2|N3|N5|N7|N8|N12|N13|N14|N18|N20|N24|N25|N26|N28|N29|N30|N34|N38|N39|N40|N41|N46|N48|N50|N51|N53|N54|N65|N66|N67|N70|N71|N74|N75|N76|N77|N78|N79|N85|N90|N91|N92|N93|N94|N96|N100|N101|N102|N104|N105|N257|N258|N259|N260|N261|N262|N263>
[:SENSe]:OBWidth:METHod <XDB|PERCent>
[:SENSe]:OBWidth:PERCent <numeric_value>
[:SENSe]:OBWidth:STATe <0 | 1 | ON | OFF>
[:SENSe]:OBWidth:XDB <numeric_value> {DB}
[:SENSe][:OTA]:MAPPing:CHP:THReshold[:DATA] <numeric_value> {<amplitude_units>}, {<numeric_value> {<amplitude_units>}}, ...
[:SENSe][:OTA]:MAPPing:CSCanner:BESt <0 | 1 | ON | OFF>
[:SENSe][:OTA]:MAPPing:CSCanner:INDex <numeric_value>
[:SENSe][:OTA]:MAPPing:DEFaults <0 | 1 | ON | OFF>
[:SENSe][:OTA]:MAPPing:DISTance:UNIT <METers|FEET>
[:SENSe][:OTA]:MAPPing:MEASurement <CHPower|PSDensity|RSSI>
[:SENSe][:OTA]:MAPPing:POINts?
[:SENSe][:OTA]:MAPPing:POINts:DELete
[:SENSe][:OTA]:MAPPing:POINts:STAT?
[:SENSe][:OTA]:MAPPing:POSition <string>
[:SENSe][:OTA]:MAPPing:PSD:THReshold[:DATA] <numeric_value> {<amplitude_units>}, {<numeric_value> {<amplitude_units>}}, ...
[:SENSe][:OTA]:MAPPing:REPeat:DISTance <numeric_value>
[:SENSe][:OTA]:MAPPing:REPeat:TIME <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe][:OTA]:MAPPing:REPeat:TYPE <TIME|DISTance>
[:SENSe][:OTA]:MAPPing:RSP:THReshold[:DATA] <numeric_value> {<amplitude_units>}, {<numeric_value> {<amplitude_units>}}, ...
[:SENSe][:OTA]:MAPPing:RSQ:THReshold[:DATA] <numeric_value> {<amplitude_units>}, {<numeric_value> {<amplitude_units>}}, ...
[:SENSe][:OTA]:MAPPing:RSSI:THReshold[:DATA] <numeric_value> {<amplitude_units>}, {<numeric_value> {<amplitude_units>}}, ...
[:SENSe][:OTA]:MAPPing:RSS:THReshold[:DATA] <numeric_value> {<amplitude_units>}, {<numeric_value> {<amplitude_units>}}, ...
[:SENSe][:OTA]:MAPPing:SOURce <ANY|DEFined>
[:SENSe][:OTA]:MAPPing:SOURce:VALue <numeric_value>
[:SENSe][:OTA]:MAPPing:SSP:THReshold[:DATA] <numeric_value> {<amplitude_units>}, {<numeric_value> {<amplitude_units>}}, ...
[:SENSe][:OTA]:MAPPing:SSQ:THReshold[:DATA] <numeric_value> {<amplitude_units>}, {<numeric_value> {<amplitude_units>}}, ...
[:SENSe][:OTA]:MAPPing:SSS:THReshold[:DATA] <numeric_value> {<amplitude_units>}, {<numeric_value> {<amplitude_units>}}, ...
[:SENSe][:OTA]:MAPPing:STATe <0 | 1 | ON | OFF>
[:SENSe][:OTA]:MAPPing:TYPE <INDoor|OUTDoor>
[:SENSe]:PCI?
[:SENSe]:POLar:CLEar
[:SENSe]:POLar:DATA?
[:SENSe]:POLar:DCOLlect <0 | 1 | ON | OFF>
[:SENSe]:POLar:STATe <0 | 1 | ON | OFF>
[:SENSe]:POWer:RF:ATTenuation <numeric_value> {DB}
[:SENSe]:POWer:RF:ATTenuation <numeric_value> {DB}
[:SENSe]:POWer:RF:ATTenuation:AUTO <0 | 1 | ON | OFF>
[:SENSe]:POWer:RF:ATTenuation:AUTO <0 | 1 | ON | OFF>
[:SENSe]:POWer:RF:GAIN:AUTO <0 | 1 | ON | OFF>
[:SENSe]:POWer:RF:GAIN:STATe <0 | 1 | ON | OFF>
[:SENSe]:POWer:RF:GAIN:STATe <0 | 1 | ON | OFF>
[:SENSe]:SCANner?
[:SENSe]:SCANner:STATe <0 | 1 | ON | OFF>
[:SENSe]:SEMask:CENTer:BWIDth <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:SEMask:MASK <GT38|LT38|W43|W41|W35|W31|WK43|WK41|WK35|WK30|LK24|LK22|LK20|NK38|NK35|NK28|NK24|CUSTom>
[:SENSe]:SEMask:MASK:CUSTom <string>,<block data>
[:SENSe]:SEMask:MASK:TYPe?
[:SENSe]:SEMask:RPOWer <numeric_value> {<amplitude_units>}
[:SENSe]:SEMask:RPOWer:STATe <0 | 1 | ON | OFF>
[:SENSe]:SEMask:STATe <0 | 1 | ON | OFF>
[:SENSe]:SIB:STATe <0 | 1 | ON | OFF>
[:SENSe]:SSB?
[:SENSe]:SSB:FREQuency <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:SSB:OFFSet <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:SSB:OFFSet:AUTO:ABORt
[:SENSe]:SSB:OFFSet:AUTO:STARt
[:SENSe]:SSB:OFFSet:AUTO:STATus?
[:SENSe][:SSB]:SCSPacing <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe][:SSB]:SCSPacing:CATalog?
[:SENSe]:STATistics:CLEar
[:SENSe]:SUBFrame <numeric_value>
[:SENSe]:SUBFrame:CONFiguration <AUTO|SSF0|SSF1|SSF2|SSF3|SSF4|SSF5|SSF6|SSF7|SSF8|SSF9|INValid>
[:SENSe]:SUBFrame:SLOT <numeric_value>
[:SENSe]:SWEep:TIME <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:SWEep:TIME:AUTO <0 | 1 | ON | OFF>
[:SENSe]:SYNCtype <SS>
[:SENSe]:TDOMain:DISPlay:LENGth <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:TDOMain:DISPlay:STARt <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:TDOMain:STATe <0 | 1 | ON | OFF>
[:SENSe]:TDOMain:TRACe[:DATa]? [<ASCii|INTeger|REAL>],[<numeric_value>]
[:SENSe]:TDOMain:TRACe:DETector[:FUNCtion] <POSitive|RMS|NEGative|SAMPle|NORMal>
[:SENSe]:TDOMain:TRACe:DISPlay[:STATe] <0 | 1 | ON | OFF>
[:SENSe]:TDOMain:TRACe:TYPE <NORMal|MINimum|MAXimum|AVERage|RMAXimum|RMINimum|RAVerage|MATH>
[:SENSe]:TDOMain:TRACe:UPDate[:STATe] <0 | 1 | ON | OFF>
[:SENSe]:THD:FREQuency:FUNDamental <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:THD:FREQuency:FUNDamental:AUTO <0 | 1 | ON | OFF>
[:SENSe]:THD:STATe <0 | 1 | ON | OFF>
[:SENSe]:TRANsmission:STATe <0 | 1 | ON | OFF>
[:SENSe]:TRIangulation:BEARing:SOURce <ANTenna|MANual>
[:SENSe]:TRIangulation:BEARing:VALue <numeric_value>
[:SENSe]:TRIangulation:CLEar
[:SENSe]:TRIangulation:DATA?
[:SENSe]:TRIangulation:REMove [<numeric_value>]
[:SENSe]:TRIangulation:STATe <0 | 1 | ON | OFF>
[:SENSe]:TRIangulation:TRIGger
[:SENSe]:UPDown:CONFig <numeric_value>
[:SENSe]:WCDMa:DEMod:CPICh <numeric_value> {<amplitude_units>}
[:SENSe]:WCDMa:DEMod:CPICh:STATe <0 | 1 | ON | OFF>
[:SENSe]:WCDMa:DEMod:PICH:CODE <numeric_value>
[:SENSe]:WCDMa:DEMod:SCCPch:CODE <numeric_value>
[:SENSe]:WCDMa:DEMod:SCCPch:SFACtor <string>
[:SENSe]:WCDMa:DEMod:SCODe <numeric_value>
[:SENSe]:WCDMa:DEMod:SCODe:AUTO <0 | 1 | ON | OFF>
[:SENSe]:WCDMa:DEMod:SFACtor <string>
[:SENSe]:WCDMa:DEMod:THRShold <numeric_value> {DB}
[:SENSe]:WCDMa:DEMod:THRShold:AUTO <0 | 1 | ON | OFF>
[:SENSe]:WCDMa:DEMod:TXPower <numeric_value> {<amplitude_units>}
[:SENSe]:WCDMa:SYNC?
:SOURce:FREQuency[:CW|FIXed] <numeric_value> {HZ | KHZ | MHZ | GHZ}
:SOURce:FREQuency:OFFSet <numeric_value> {HZ | KHZ | MHZ | GHZ}
:SOURce:MODe <SWEEp|OFFSet|FIXed|COUPled>
:SOURce:POWer:DISPlay:OFFSet <numeric_value> {DB}
:SOURce:POWer[:PORT][:LEVel][:IMMediate][:AMPLitude] <numeric_value> {<amplitude_units>}
:STATus:OPERation[:EVENt]?
:THReshold:SINR <numeric_value> {DB}
:TRACe<n>:IQ:DATA? [<numeric_value>]
:TRACe<n>:DETector[:FUNCtion] <POSitive|RMS|NEGative|SAMPle|NORMal>
:TRACe<n>:DISPlay[:STATe] <0 | 1 | ON | OFF>
:TRACe<n>:DISPlay:VIEW:SPECtrogram:ELAPsed?
:TRACe<n>:DISPlay:VIEW:SPECtrogram:POSition <numeric_value>
:TRACe<n>:DISPlay:VIEW:SPECtrogram:TIME <numeric_value>
:TRACe<n>:NORMalize <0 | 1 | ON | OFF>
:TRACe<n>:SWEep:COUNt[:CURRent]?
:TRACe<n>:TYPE <NORMal|MINimum|MAXimum|AVERage|RMAXimum|RMINimum|RAVerage|MATH>
:TRACe<n>:UPDate[:STATe] <0 | 1 | ON | OFF>
:TRACe:CLEar <numeric_value>
:TRACe:CLEar:ALL
:TRACe[:DATA]? <numeric_value>
:TRACe[:DATA]:ALL? [<ASCii|INTeger|REAL>],[<numeric_value>]
:TRACe:IQ:DATA:FORMat <PACKed>
:TRACe:PLAYback <PLAY|STOP|PAUSe>
:TRACe:PLAYback:FILE?
:TRACe:PLAYback:INTerval <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:TRACe:PLAYback:LOOP <0 | 1 | ON | OFF>
:TRACe:PLAYback:POSition?
:TRACe:PLAYback:SEEK <numeric_value>
:TRACe:PLAYback:TAG <NEXT|PREVious|ADD|REMove|ALL>
:TRACe:PLAYback:TAGS? [<RECord|PLAYback>]
:TRACe:PLAYback:TAG:TABLe <0 | 1 | ON | OFF>
:TRACe:PRESet:ALL
:TRACe:RECord <RECord|STOP|PAUSe>
:TRACe:RECord:CSV:LINK <RECord|PLAYback|OFF>
:TRACe:RECord:CSV:STATe <RECord|STOP|PAUSe>
:TRACe:RECord:INTerval:MODE <AUTO|MANual>
:TRACe:RECord:INTerval:TIME <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:TRACe:RECord:LINK <0 | 1 | ON | OFF>
:TRACe:RECord:MODE <AUTO|TIMed>
:TRACe:RECord:TAG
:TRACe:RECord:TIME <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:TRACe:SELect <numeric_value>
:TRACe:SPECtrogram:DETector[:FUNCtion] <POSitive|RMS|NEGative|SAMPle|NORMal>
:TRACe:SPECtrogram:TYPE <NORMal|MINimum|MAXimum|AVERage|RMAXimum|RMINimum|RAVerage>
:TRACe:STATus? <numeric_value>
:TRIGger:GATE:SLOPe <POSitive|NEGative>
:TRIGger[:SEQuence]:ATRigger <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:TRIGger[:SEQuence]:ATRigger:STATe <0 | 1 | ON | OFF>
:TRIGger[:SEQuence]:DELay <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:TRIGger[:SEQuence]:DELay:STATe <0 | 1 | ON | OFF>
:TRIGger[:SEQuence]:HOLDoff <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:TRIGger[:SEQuence]:HOLDoff:STATe <0 | 1 | ON | OFF>
:TRIGger[:SEQuence]:SLOPe <POSitive|NEGative>
:TRIGger[:SEQuence]:SOURce <EXT|IMMediate|VIDeo>
:TRIGger[:SEQuence]:VIDeo:HYSTeresis <numeric_value> {DB}
:TRIGger[:SEQuence]:VIDeo:LEVel <numeric_value> {<amplitude_units>}
:UNIT:CHPower:PSDensity <HZ|MHZ>
:UNIT:POWer <DBM|DBM/M2|DBW|DBW/M2|DBV|DBV/M|DBMV|DBMV/M|DBUV|DBUV/M|DBA|DBA/M|V|V/M|A|A/M|W|W/M2|W/CM2>
:UNIT:POWer <DBM|DBM/M2|DBW|DBW/M2|DBV|DBV/M|DBMV|DBMV/M|DBUV|DBUV/M|DBA|DBA/M|V|V/M|A|A/M|W|W/M2|W/CM2>
High Accuracy Power Meter Commands
:CALCulate:FORWard:LIMit:LOWer <numeric_value> {DBM}
:CALCulate:FORWard:LIMit:LOWer:FAIL?
:CALCulate:FORWard:LIMit:LOWer:PERCent <percent_value>
:CALCulate:FORWard:LIMit:UPPer <numeric_value> {DBM}
:CALCulate:FORWard:LIMit:UPPer:FAIL?
:CALCulate:FORWard:LIMit:UPPer:PERCent <percent_value>
:CALCulate:FORWard:RELative:STATe <0 | 1 | ON | OFF>
:CALCulate:LIMit:ALARm:STATe <0 | 1 | ON | OFF>
:CALCulate:LIMit:LOWer <numeric_value> {DBM}
:CALCulate:LIMit:LOWer:FAIL?
:CALCulate:LIMit:LOWer:PERCent <percent_value>
:CALCulate:LIMit:STATe <0 | 1 | ON | OFF>
:CALCulate:LIMit:UPPer <numeric_value> {DBM}
:CALCulate:LIMit:UPPer:FAIL?
:CALCulate:LIMit:UPPer:PERCent <percent_value>
:CALCulate:MAXHold:STATe <0 | 1 | ON | OFF>
:CALCulate:RELative:STATe <0 | 1 | ON | OFF>
:CALCulate:REVerse:LIMit:LOWer <numeric_value> {DBM}
:CALCulate:REVerse:LIMit:LOWer:FAIL?
:CALCulate:REVerse:LIMit:LOWer:PERCent <percent_value>
:CALCulate:REVerse:LIMit:UPPer <numeric_value> {DBM}
:CALCulate:REVerse:LIMit:UPPer:FAIL?
:CALCulate:REVerse:LIMit:UPPer:PERCent <percent_value>
:CALCulate:REVerse:RELative:STATe <0 | 1 | ON | OFF>
:CALibration:ZERO
:DISPlay:WINDow[:SCALe]:MAXimum <numeric_value> {DBM}
:DISPlay:WINDow[:SCALe]:MAXimum:PERCent <percent_value>
:DISPlay:WINDow[:SCALe]:MINimum <numeric_value> {DBM}
:DISPlay:WINDow[:SCALe]:MINimum:PERCent <percent_value>
:MMEMory:STORe:FDATa:CSV <string>,<string>
:SENSe:APERture <numeric_value>
:SENSe:APERture:MODE <HAT|LAT>
:SENSe:AVERage:COUNt <numeric_value>
:SENSe:AVERage:SWEep?
:SENSe:CCDFthreshold <numeric_value>
:SENSe:CORRection:EXTernal:GAIN <numeric_value> {DB}
:SENSe:CORRection:EXTernal:LOSS <numeric_value> {DB}
:SENSe:DUTYcycle <percent_value>
:SENSe:FREQuency <numeric_value> {HZ | KHZ | MHZ | GHZ}
:SENSe:FREQuency:SSTandard:CATalog?
:SENSe:FREQuency:SSTandard:NAME <string>
:SENSe:MAXHold:DATA?
:SENSe:MODType <NONE|GSM|SINGle|MULT|ISDB|CDMA>
:SENSe:POWer:DATA?
:SENSe:POWer:FORWard <FAVG|CRESt|BAM|PEAK|BAA|CCDF>
:SENSe:POWer:INLine:DATA?
:SENSe:POWer:REVerse <RAVG|REFL|RLOSs|VSWR>
:SENSe:SUMMary <0 | 1 | ON | OFF>
:SENSe:SWEep:MODE <CONTinuous|SINGle>
:SENSe:USBDevice:PSENsor:INFormation?
:SENSe:VBW <FULL|FOUR|TWO>
:TRIGger[:SEQuence][:REMote]:SINGle
:UNIT:POWer <DBM|WATTs>
Cable and Antenna Analyzer (USB) Commands
:CALCulate<n>:LIMit:PRESet
:CALCulate<n>:MARKer:ALL:OFF
:CALCulate<n>:MARKer:ALL:ON
:CALCulate<n>:MARKer:PRESet
:CALCulate<n>:MARKer:TABLe[:STATe] <0 | 1 | ON | OFF>
:CALCulate<n>:MEASurement:CONFigure <RLDTf|TDDTf>
:CALCulate<n>:TRACe<n>:DATA? <FDATa|SDATa|FMEM|SMEM>
:CALCulate<n>:TRACe<n>:LIMit:ALARm <0 | 1 | ON | OFF>
:CALCulate<n>:TRACe<n>:LIMit:FAIL?
:CALCulate<n>:TRACe<n>:LIMit:LOWer[:STATe] <0 | 1 | ON | OFF>
:CALCulate<n>:TRACe<n>:LIMit:LOWer:Y <numeric_value>
:CALCulate<n>:TRACe<n>:LIMit:MESSage <0 | 1 | ON | OFF>
:CALCulate<n>:TRACe<n>:LIMit:MODE <SINGle|SEGMented>
:CALCulate<n>:TRACe<n>:LIMit:SEGMent:ADD
:CALCulate<n>:TRACe<n>:LIMit:SEGMent:ALL <block data>
:CALCulate<n>:TRACe<n>:LIMit:SEGMent:CLEar
:CALCulate<n>:TRACe<n>:LIMit:SEGMent:COUNt? [<UPPer|LOWer>]
:CALCulate<n>:TRACe<n>:LIMit:SEGMent:DELete [<numeric_value>]
:CALCulate<n>:TRACe<n>:LIMit:SEGMent:SELect <numeric_value>
:CALCulate<n>:TRACe<n>:LIMit:SEGMent[:SELected]:STARt:X <numeric_value>
:CALCulate<n>:TRACe<n>:LIMit:SEGMent[:SELected]:STARt:Y <numeric_value>
:CALCulate<n>:TRACe<n>:LIMit:SEGMent[:SELected]:STOP:X <numeric_value>
:CALCulate<n>:TRACe<n>:LIMit:SEGMent[:SELected]:STOP:Y <numeric_value>
:CALCulate<n>:TRACe<n>:LIMit:SEGMent[:SELected]:TYPE <UPPer|LOWer>
:CALCulate<n>:TRACe<n>:LIMit:SEGMent:STATus? [<block data>]
:CALCulate<n>:TRACe<n>:LIMit:SEGMent:VMOVe <numeric_value>
:CALCulate<n>:TRACe<n>:LIMit:TYPE <UPPer|LOWer>
:CALCulate<n>:TRACe<n>:LIMit:UPPer[:STATe] <0 | 1 | ON | OFF>
:CALCulate<n>:TRACe<n>:LIMit:UPPer:Y <numeric_value>
:CALCulate<n>:TRACe<n>:MARKer<n>:MODE <NORMal|DELTa>
:CALCulate<n>:TRACe<n>:MARKer<n>:MOVE <TRACe|MEMory>
:CALCulate<n>:TRACe<n>:MARKer<n>[:STATe] <0 | 1 | ON | OFF>
:CALCulate<n>:TRACe<n>:MARKer<n>:TIME:X?
:CALCulate<n>:TRACe<n>:MARKer<n>:X <numeric_value>
:CALCulate<n>:TRACe<n>:MARKer<n>:Y?
:CALCulate<n>:TRACe<n>:MARKer:LSearch?
:CALCulate<n>:TRACe<n>:MARKer:MOVE:LEFT
:CALCulate<n>:TRACe<n>:MARKer:MOVE:RIGHt
:CALCulate<n>:TRACe<n>:MARKer:PEAK
:CALCulate<n>:TRACe<n>:MARKer:PEAK:BOUNded:OTWO
:CALCulate<n>:TRACe<n>:MARKer:PEAK:BOUNded:TFOur
:CALCulate<n>:TRACe<n>:MARKer:SELect <numeric_value>
:CALCulate<n>:TRACe<n>:MARKer:TRACking[:STATe] <0 | 1 | ON | OFF>
:CALCulate<n>:TRACe<n>:MARKer:VALLey
:CALCulate<n>:TRACe<n>:MARKer:VALLey:BOUNded:OTWO
:CALCulate<n>:TRACe<n>:MARKer:VALLey:BOUNded:TFOur
:CALCulate<n>:TRACe<n>:MATH:FUNCtion <NORMal|FADD|FSUBtract|FAVerage>
:CALCulate<n>:TRACe<n>:SMOothing:APERture <numeric_value>
:CALCulate<n>:TRACe<n>:CLAVerage?
:CALCulate<n>:TRACe<n>:MEASurement <RLOSs|DTFRloss|VSWR|DTFVswr|CLOSs|TRES|SMITh|PHASe||TDOHm|TDLin>
:CALCulate<n>:TRACe[:DATA]:ALL?
:CALCulate<n>:TRACe:LIMit:PRESet
:CALCulate<n>:TRANsform:CLAVerage?
:CALCulate<n>:TRANsform:DISTance:CABLe:INFormation? [<string>]
:CALCulate<n>:TRANsform:DISTance:CABLelist:ACTive?
:CALCulate<n>:TRANsform:DISTance:CABLelist:CATalog?
:CALCulate<n>:TRANsform:DISTance:CABLe:NAME <string>
:CALCulate<n>:TRANsform:DISTance:CABLoss <numeric_value>
:CALCulate<n>:TRANsform:DISTance:DATA?
:CALCulate<n>:TRANsform:DISTance:DMAX?
:CALCulate<n>:TRANsform:DISTance:PVELocity <numeric_value>
:CALCulate<n>:TRANsform:DISTance:RESolution?
:CALCulate<n>:TRANsform:DISTance:STARt <numeric_value>
:CALCulate<n>:TRANsform:DISTance:STOP <numeric_value>
:CALCulate<n>:TRANsform:DISTance:UNIT <METers|FEET>
:CALCulate<n>:TRANsform:DISTance:USER:CABLe:ADD <string>
:CALCulate<n>:TRANsform:DISTance:USER:CABLe:CLEar
:CALCulate<n>:TRANsform:DISTance:USER:CABLe:DELete <string>
:CALCulate<n>:TRANsform:DISTance:USER:CABLe:INFormation? [<string>]
:CALCulate<n>:TRANsform:DISTance:USER:CABLelist:CATalog?
:CALCulate<n>:TRANsform:DISTance:USER:CABLe:NAME <string>
:CALCulate<n>:TRANsform:DISTance:USER:CABLe:REName <string>,<string>
:CALCulate<n>:TRANsform:DISTance:WINDow <RECTangular|NSLobe|LSLobe|MSLobe>
:DIAGnostic:SWEep:FREQuency:DATA?
:DISPlay<n>:WINDow:TRACe<n>:STATe <TRACe|MEMory|BOTH>
:DISPlay:WINDow<n>:LAYout <SINGle|HDUal>
:DISPlay:WINDow<n>:TRACe<n>:Y:AUTO
:DISPlay:WINDow<n>:TRACe<n>:Y:BOTTom <numeric_value>
:DISPlay:WINDow<n>:TRACe<n>:Y:FULL
:DISPlay:WINDow<n>:TRACe<n>:Y:SMCHart <STANdard|E10|E20|E30|C3>
:DISPlay:WINDow<n>:TRACe<n>:Y:TOP <numeric_value>
:DISPlay:WINDow<n>:TRACe:SCALe:PRESet
:FORMat[:READings][:DATA] <REAL|INTeger>,[<numeric_value>]
:INITiate:VNA:SELFtest?
:MMEMory:CABLelist?
:MMEMory:LOAD <string>
:MMEMory:STORe <string>
:MMEMory:USER:CABLelist <block data>
:SENSe<n>:AVERage:CLEar
:SENSe<n>:AVERage:COUNt <numeric_value>
:SENSe<n>:AVERage:STATe <0 | 1 | ON | OFF>
:SENSe<n>:AVERage:SWEep?
:SENSe<n>:CORRection:COLLect:ABORt
:SENSe<n>:CORRection:COLLect[:ACQuire] <OPEN|SHORt|SHT1|SHT2|SHT3|LOAD|THRU|ISOLation|ZERO|RECiprocal|RDEVice|LINE1|LINE2|MATCh|INSTacal>,<numeric_value>
:SENSe<n>:CORRection:COLLect:ACQuire:STATus? <OPEN|SHORt|SHT1|SHT2|SHT3|LOAD|THRU|ISOLation|ZERO|RECiprocal|RDEVice|LINE1|LINE2|MATCh|INSTacal>,<numeric_value>
:SENSe<n>:CORRection:COLLect:ACTive:TYPE?
:SENSe<n>:CORRection:COLLect:CKIT:INFormation? <numeric_value>
:SENSe<n>:CORRection:COLLect:CKIT:PORT<n>:CATalog?
:SENSe<n>:CORRection:COLLect:CKIT:PORT<n>:RIMPedance?
:SENSe<n>:CORRection:COLLect:CKIT:PORT<n>[:SELect] <string>
:SENSe<n>:CORRection:COLLect:CONNector:CATalog? <numeric_value>
:SENSe<n>:CORRection:COLLect:INFormation?
:SENSe<n>:CORRection:COLLect:INITialize
:SENSe<n>:CORRection:COLLect:LOAD
:SENSe<n>:CORRection:COLLect:OPEN
:SENSe<n>:CORRection:COLLect:PORT<n>:DCONnector <MN|FN>
:SENSe<n>:CORRection:COLLect:SAVE
:SENSe<n>:CORRection:COLLect:SHORt
:SENSe<n>:CORRection:COLLect:STATus?
:SENSe<n>:CORRection:COLLect:STEP:STATus?
:SENSe<n>:CORRection:COLLect:TYPE <RFP1|ES2P|TRES|IRP1|IS2P|>
:SENSe<n>:CORRection:COLLect:VALid:STATus?
:SENSe<n>:CORRection:DATA? <ERF|EDF|ESF|ETF|ELF|EXF|ERR|EDR|ESR|ETR|ELR|EXR>
:SENSe<n>:CORRection:IMPedance[:INPut][:MAGNitude]:SMCHart <numeric_value>
:SENSe<n>:CORRection[:STATe] <0 | 1 | ON | OFF>
:SENSe<n>:CORRection:TYPE <STANdard|FLEX>
:SENSe<n>:FREQuency:CENTer <numeric_value> {HZ | KHZ | MHZ | GHZ}
:SENSe<n>:FREQuency:SPAN <numeric_value> {HZ | KHZ | MHZ | GHZ}
:SENSe<n>:FREQuency:STARt <numeric_value> {HZ | KHZ | MHZ | GHZ}
:SENSe<n>:FREQuency:STEP?
:SENSe<n>:FREQuency:STOP <numeric_value> {HZ | KHZ | MHZ | GHZ}
:SENSe<n>:HOLD:FUNCtion:RF[:STATe] <0 | 1 | ON | OFF>
:SENSe<n>:SWEep:MODE <CONTinuous|SINGle>
:SENSe<n>:SWEep:POINt <numeric_value>
:SENSe<n>:SWEep:RATE <NORMal|FAST>
:SENSe<n>:SWEep:RESolution <numeric_value>
:SENSe<n>:SWEep:RFIMmunity <HIGH|LOW>
:SENSe<n>:SWEep:STATe <RUN|HOLD>
:SENSe<n>:SWEep:TIME?
:SENSe<n>:TRACe<n>:AMPLitude:UNIT?
:SENSe<n>:TRACe:PRESet
:SENSe<n>:TRACe:SELect <numeric_value>
:SENSe<n>:TRACe:TOTal <numeric_value>
:SENSe<n>:USBDevice:INSTacal:INFormation?
:SENSe<n>:USBDevice:PSENsor:INFormation?
:SENSe<n>:USBDevice:SMASter:INFormation?
[:SENSe]:FREQuency:SPAN:FULL
:STATus:OPERation[:EVENt]?
:TRACe[:DATA]? <numeric_value>
:TRIGger[:SEQuence][:IMMediate][:REMote]
:TRIGger[:SEQuence][:REMote]:SINGle
SCPI Error Table
Field Master MS2070A Programming Manual
Programming with SCPI
Scope of Manual
Additional Documentation
Introduction
Remote Programming Setup and Interface
Network Interface Connection and Setup
USBTMC Interface Connection and Setup
Sending SCPI Commands with NI-VISA
SCPI Command Overview
Command Names
Command Syntax
Data Parameters
Spectrum Trace Data Format
Unit Suffixes
Query Commands
Hierarchical Command Structure
SCPI Command Types
SCPI Common Commands
*CLS
*IDN?
*RST
SCPI Required Commands
SCPI Optional Commands
Status System Reporting
Status Group Registers
Status Group Reporting
SCPI Commands
SCPI Command Programming Examples
Notational Examples
Spectrum Trace Data via SCPI
C/C++
Programming Examples
MS2070A Commands
Common Commands
*CLS
*ESE <numeric_value>
*ESR?
*IDN?
*OPC
*OPT?
*RCL <numeric_value>
*RST
*SAV <numeric_value>
*SRE <numeric_value>
*STB?
*TST?
*WAI
System Commands
:DIAGnostic:MEMory?
:DISPlay:LANGuage <EN|ES|ZH|JA|FR|KO>
:DISPlay[:WINDow]:TEXT:STATe <0 | 1 | ON | OFF>
:FETCh:GPS?
:FETCh:GPS:ALL?
:FETCh:GPS:FULL?
:FETCh:GPS:LAST?
:INSTrument:APPLication:STATe <SPA|HIPM>,<0 | 1 | ON | OFF>
:INSTrument:CATalog:ACTive?
:INSTrument:CATalog:ALL?
:INSTrument:CATalog:FULL?
:INSTrument:NSELect <numeric_value>
:INSTrument[:SELect] <SPA|HIPM>
:MMEMory:CATalog:DIRectory? <string>,<string>
:MMEMory:CATalog:DIRectory:SIZE? <string>,<string>
:MMEMory:CATalog:MSUSs?
:MMEMory:CDIRectory <string>
:MMEMory:COPY <string>,<string>,<string>,<string>
:MMEMory:CREate:DIRectory <string>,<string>
:MMEMory:DATA <string>,<string>,<block data>
:MMEMory:DELete:DIRectory <string>,<string>
:MMEMory:DELete:FILe <string>,<string>
:MMEMory:EJECt <string>
:MMEMory:LOAD:STATe <numeric_value>,<string>,<string>
:MMEMory:LOAD:TRACe <string>,<string>,<string>
:MMEMory:MSIS <string>
:MMEMory:STORe:STATe <numeric_value>,<string>,<string>
:MMEMory:STORe:TRACe <string>,<string>,<string>
:OUTPut:ROSCillator:STATe <0 | 1 | ON | OFF>
[:SENSe]:BIAS:EXTernal:CURRent?
[:SENSe]:BIAS:EXTernal:STATe <0 | 1 | ON | OFF>
[:SENSe]:BIAS:EXTernal:TRIPped[:STATe]?
[:SENSe]:BIAS:EXTernal:TRIPped[:STATe]:CLEar
[:SENSe]:BIAS:EXTernal:VOLTage <numeric_value>
[:SENSe]:FREQuency:REFerence:SOURce?
[:SENSe]:RF:SAFE:MODE <0 | 1 | ON | OFF>
[:SENSe]:TIME:REFerence:SOURce?
:SYSTem:COMMunicate:LAN:CONFig <string>,[<string>],[<string>]
:SYSTem:COMMunicate:LAN:CONFig:CURRent?
:SYSTem:COMMunicate:LAN:DHCP <ON|OFF>
:SYSTem:COMMunicate:LAN:DNS <string>,<string>,<string>
:SYSTem:COMMunicate:LAN:DNSServer:APPend <string>, {<string>}, ...
:SYSTem:COMMunicate:LAN:DNSServer:DELete <string>, {<string>}, ...
:SYSTem:COMMunicate:LAN:DNSServer:LIST <string>, {<string>}, ...
:SYSTem:COMMunicate:LAN:FTP:STATe <0 | 1 | ON | OFF>
:SYSTem:COMMunicate:LAN:HOSTname <string>
:SYSTem:COMMunicate:LAN:HTTP:SECure:STATe <0 | 1 | ON | OFF>
:SYSTem:COMMunicate:LAN:SECure:CREDentials <string>,<string>,<RSA>
:SYSTem:COMMunicate:LAN:SECure:SSLCertificate?
:SYSTem:COMMunicate:WLAN:CONFig:CURRent?
:SYSTem:COMMunicate:WLAN:CONNection <string>,[<string>]
:SYSTem:COMMunicate:WLAN:CONNection:ACTive?
:SYSTem:COMMunicate:WLAN:CONNection:DISConnect
:SYSTem:COMMunicate:WLAN:CONNection:FORGet <string>
:SYSTem:COMMunicate:WLAN:CONNection:FORGet:ALL
:SYSTem:COMMunicate:WLAN:CONNection:SAVed?
:SYSTem:COMMunicate:WLAN:CONNection:STATus?
:SYSTem:COMMunicate:WLAN:NETWorks?
:SYSTem:COMMunicate:WLAN:NETWorks:REFResh
:SYSTem:COMMunicate:WLAN:STATe <0 | 1 | ON | OFF>
:SYSTem:DATE <numeric_value>,<numeric_value>,<numeric_value>
:SYSTem:DEFault:RESet:ALL
:SYSTem:DEFault:RESet:DATA <USER|SYSTem>
:SYSTem:DEFault:RESet:FACTory
:SYSTem:ERRor:DISPlay <0 | 1 | ON | OFF>
:SYSTem:ERRor[:NEXT]?
:SYSTem:FIRMware:UPDate <string>,<string>
:SYSTem:FIRMware:UPDate:LIST?
:SYSTem:FIRMware:UPDate:REMote <string>
:SYSTem:FIRMware:UPDate:REMote:AUTO <0 | 1 | ON | OFF>
:SYSTem:FIRMware:UPDate:REMote:LATest?
:SYSTem:FIRMware:UPDate:REMote:LIST?
:SYSTem:FIRMware:UPDate:REMote:LIST:REFResh
:SYSTem:FIRMware:UPDate:REMote:SOURce <string>
:SYSTem:FIRMware:VERSion?
:SYSTem:GPS:SEARch:MODE <GGLonass|GGALileo|GBEidou|GGGalileo>
:SYSTem:GPS:STATe <0 | 1 | ON | OFF>
:SYSTem:GPS:VOLTage <numeric_value>
:SYSTem:LOG:ERRor?
:SYSTem:MACaddress?
:SYSTem:OPTions?
:SYSTem:OPTions:ALL?
:SYSTem:OPTions:CONFig?
:SYSTem:OPTions:TIMed:ACTivate <string>
:SYSTem:OPTions:UPDate:REMote
:SYSTem:OPTions:UPGRade <string>
:SYSTem:PASSword:CDISable <string>
:SYSTem:PASSword:CENable <string>
:SYSTem:PASSword:CENable:ALL <string>
:SYSTem:PASSword:CONNection:STATe?
:SYSTem:PASSword:INTegrity?
:SYSTem:PASSword:NEW <string>,<string>
:SYSTem:PASSword:SET?
:SYSTem:PASSword:SSLKey?
:SYSTem:PASSword:STATe?
:SYSTem:PRESet
:SYSTem:PRESet:MODE
:SYSTem:REBoot
:SYSTem:REMote:DISPlay:LOCK <0 | 1 | ON | OFF>
:SYSTem:SETup:SHORtcuts <numeric_value>,<string>,[<string>]
:SYSTem:SETup:SHORtcuts:CLEar
:SYSTem:SETup:SHORtcuts:DEL <numeric_value>
:SYSTem:SETup:SHORtcuts:LOAD <numeric_value>
:SYSTem:SETup:SHORtcuts:REName <numeric_value>,<string>
:SYSTem:SHUTdown
:SYSTem:TEMPerature?
:SYSTem:TIME <numeric_value>,<numeric_value>,<numeric_value>
:SYSTem:TIME:SYNC <AUTO|MANual>
:SYSTem:TIME:SYNC:STATus?
:SYSTem:TIME:ZONE <string>
:SYSTem:TIME:ZONE:CATalog?
:SYSTem:UNIT:NAMe <string>
:TEST:SELFtest?
:TRIGger[:SEQuence]:PORT<n>[:DIRection] <IN|OUT>
Spectrum Analyzer Commands
:ABORt
:CALCulate:LIMit<n>:COMMent <string>
:CALCulate:LIMit<n>:CONTrol[:DATA] <numeric_value> {HZ | KHZ | MHZ | GHZ}, {<numeric_value> {HZ | KHZ | MHZ | GHZ}}, ...
:CALCulate:LIMit<n>:CONTrol:MODE <ABSolute|RELative>
:CALCulate:LIMit<n>:CONTrol:SHIFt <numeric_value> {HZ | KHZ | MHZ | GHZ}
:CALCulate:LIMit<n>:COPY <numeric_value>
:CALCulate:LIMit<n>:DELete
:CALCulate:LIMit<n>:FAIL?
:CALCulate:LIMit<n>:LOWer[:DATA] <numeric_value> {<amplitude_units>}, {<numeric_value> {<amplitude_units>}}, ...
:CALCulate:LIMit<n>:LOWer:MODE <ABSolute|RELative>
:CALCulate:LIMit<n>:LOWer:SHIFt <numeric_value> {DB}
:CALCulate:LIMit<n>:LOWer:STATe <0 | 1 | ON | OFF>
:CALCulate:LIMit<n>:NAME <string>
:CALCulate:LIMit<n>:STATe <0 | 1 | ON | OFF>
:CALCulate:LIMit<n>:TRACe<n>:CHECk <0 | 1 | ON | OFF>
:CALCulate:LIMit<n>:UPPer[:DATA] <numeric_value> {<amplitude_units>}, {<numeric_value> {<amplitude_units>}}, ...
:CALCulate:LIMit<n>:UPPer:MODE <ABSolute|RELative>
:CALCulate:LIMit<n>:UPPer:SHIFt <numeric_value> {DB}
:CALCulate:LIMit<n>:UPPer:STATe <0 | 1 | ON | OFF>
:CALCulate:LIMit:ACTive?
:CALCulate:ACPower:LIMit:ADJacent:ABSolute <numeric_value> {<amplitude_units>}
:CALCulate:ACPower:LIMit:ADJacent:LOWer:FAIL?
:CALCulate:ACPower:LIMit:ADJacent:RELative <numeric_value> {DB}
:CALCulate:ACPower:LIMit:ADJacent:UPPer:FAIL?
:CALCulate:ACPower:LIMit:ALTernate:ABSolute <numeric_value> {<amplitude_units>}
:CALCulate:ACPower:LIMit:ALTernate:LOWer:FAIL?
:CALCulate:ACPower:LIMit:ALTernate:RELative <numeric_value> {DB}
:CALCulate:ACPower:LIMit:ALTernate:UPPer:FAIL?
:CALCulate:ACPower:LIMit:FAIL?
:CALCulate:ACPower:LIMit:MAIN <numeric_value> {<amplitude_units>}
:CALCulate:ACPower:LIMit:MODE <ABSolute|RELative>
:CALCulate:ACPower:LIMit:STATe <0 | 1 | ON | OFF>
:CALCulate:CHPower:LIMit <numeric_value> {<amplitude_units>}
:CALCulate:CHPower:LIMit:FAIL?
:CALCulate:CHPower:LIMit:PSDensity <numeric_value> {<amplitude_units>}
:CALCulate:CHPower:LIMit:PSDensity:STATe <0 | 1 | ON | OFF>
:CALCulate:CHPower:LIMit:PSD:FAIL?
:CALCulate:CHPower:LIMit:STATe <0 | 1 | ON | OFF>
:CALCulate:CINTerference:CARrier:LIMit <numeric_value> {<amplitude_units>}
:CALCulate:CINTerference:CARrier:LIMit:FAIL?
:CALCulate:CINTerference:CARrier:LIMit:STATe <0 | 1 | ON | OFF>
:CALCulate:CINTerference:CIRatio:LIMit <numeric_value> {DB}
:CALCulate:CINTerference:CIRatio:LIMit:FAIL?
:CALCulate:CINTerference:CIRatio:LIMit:STATe <0 | 1 | ON | OFF>
:CALCulate:CINTerference:INTerference:LIMit <numeric_value> {<amplitude_units>}
:CALCulate:CINTerference:INTerference:LIMit:FAIL?
:CALCulate:CINTerference:INTerference:LIMit:STATe <0 | 1 | ON | OFF>
:CALCulate:INTerference:LIMit <numeric_value> {<amplitude_units>}
:CALCulate:INTerference:LIMit:FAIL?
:CALCulate:INTerference:LIMit:STATe <0 | 1 | ON | OFF>
:CALCulate:LIMit<n>:ENVelope:UPDate:Y
:CALCulate:LIMit<n>:LOWer:ENVelope:CREate
:CALCulate:LIMit<n>:LOWer[:TRACe]:POINts?
:CALCulate:LIMit<n>:UPPer:ENVelope:CREate
:CALCulate:LIMit<n>:UPPer[:TRACe]:POINts?
:CALCulate:LIMit:ALARm <0 | 1 | ON | OFF>
:CALCulate:LIMit:ENVelope:OFFSet <numeric_value> {<amplitude_units>}
:CALCulate:LIMit:ENVelope:POINt <numeric_value>
:CALCulate:LIMit:ENVelope:SHAPe <SQUare|SLOPe>
:CALCulate:MARKer<n>:FUNCtion <OFF|NOISe|FCOunter|QUASi>
:CALCulate:MARKer<n>:MAXimum
:CALCulate:MARKer<n>:MAXimum:LEFT
:CALCulate:MARKer<n>:MAXimum:NEXT
:CALCulate:MARKer<n>:MAXimum:RIGHt
:CALCulate:MARKer<n>:MODE <POSition|DELTa|FIXed>
:CALCulate:MARKer<n>:MOVE:LEFT
:CALCulate:MARKer<n>:MOVE:RIGHt
:CALCulate:MARKer<n>:REFerence <numeric_value>
:CALCulate:MARKer<n>[:SET]:CENTer
:CALCulate:MARKer<n>[:SET]:RLEVel
:CALCulate:MARKer<n>:STATe <0 | 1 | ON | OFF>
:CALCulate:MARKer<n>:TRACe <numeric_value>
:CALCulate:MARKer<n>:X <numeric_value> {HZ | KHZ | MHZ | GHZ}
:CALCulate:MARKer<n>:X <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:CALCulate:MARKer<n>:Y <numeric_value> {<amplitude_units>}
:CALCulate:MARKer:AOFF
:CALCulate:MARKer:APReset
:CALCulate:MARKer[:DATA]:ALL?
:CALCulate:MARKer:FUNCtion:FCOunter:RESolution <R0|R1|R2|R3>
:CALCulate:MARKer:PEAK:EXCursion <numeric_value> {DB}
:CALCulate:MARKer:PEAK:EXCursion:STATe <0 | 1 | ON | OFF>
:CALCulate:MARKer:PEAK:THReshold <numeric_value> {<amplitude_units>}
:CALCulate:MARKer:PEAK:THReshold:STATe <0 | 1 | ON | OFF>
:CALCulate:OBW:LIMit <numeric_value> {HZ | KHZ | MHZ | GHZ}
:CALCulate:OBW:LIMit:FAIL?
:CALCulate:OBW:LIMit:STATe <0 | 1 | ON | OFF>
:CONFigure:ACPower
:CONFigure:CHPower
:CONFigure:CINTerference
:CONFigure:INTerference
:CONFigure:OBWidth
:CONFigure:SEMask
:CSCanner:ADD:CUSTom <numeric_value> {HZ | KHZ | MHZ | GHZ},<numeric_value> {HZ | KHZ | MHZ | GHZ},[<numeric_value>],[<string>],[<numeric_value> {PS | NS | US | MS | S | MIN | HR}],[<numeric_value> {<amplitude_units>}],[<numeric_value> {<amplitude_units>}]
:CSCanner:ADD:FREQuency <numeric_value> {HZ | KHZ | MHZ | GHZ},<numeric_value> {HZ | KHZ | MHZ | GHZ},<numeric_value> {HZ | KHZ | MHZ | GHZ},<numeric_value>,[<numeric_value>],[<string>],[<numeric_value> {PS | NS | US | MS | S | MIN | HR}],[<numeric_value> {<amplitude_units>}],[<numeric_value> {<amplitude_units>}]
:CSCanner:ADD:SIGnalstandard <string>,<numeric_value>,<numeric_value>,<numeric_value>,[<numeric_value>],[<numeric_value> {HZ | KHZ | MHZ | GHZ}],[<numeric_value> {PS | NS | US | MS | S | MIN | HR}],[<numeric_value> {<amplitude_units>}],[<numeric_value> {<amplitude_units>}]
:CSCanner:AVERage:TYPE <LAST|MAX|MIN|AVER|RMAX|RMIN|RAV>
:CSCanner:CHANnel?
:CSCanner:CHANnel:LIMit?
:CSCanner:CLEar <numeric_value>
:CSCanner:CLEar:ALL
:CSCanner:DELete <numeric_value>
:CSCanner:DELete:ALL
:CSCanner:EDIT:CUSTom <numeric_value> {HZ | KHZ | MHZ | GHZ},<numeric_value> {HZ | KHZ | MHZ | GHZ},<numeric_value>,[<string>],[<numeric_value> {PS | NS | US | MS | S | MIN | HR}],[<numeric_value> {<amplitude_units>}],[<numeric_value> {<amplitude_units>}]
:CSCanner:EDIT:SIGnalstandard <string>,<numeric_value>,<numeric_value>,[<numeric_value> {HZ | KHZ | MHZ | GHZ}],[<numeric_value> {PS | NS | US | MS | S | MIN | HR}],[<numeric_value> {<amplitude_units>}],[<numeric_value> {<amplitude_units>}]
:CSCanner:LOG <0 | 1 | ON | OFF>
:CSCanner:LOG:INTerval <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:CSCanner:RESults? [<ALL|STRip|BAR>],[<numeric_value>]
:CSCanner:SORT:ASC <CFR|BWID|DTIM|LIMI|LAST|MAX|MIN|AVER|RMAX|RMIN|RAV>
:CSCanner:SORT:DESC <CFR|BWID|DTIM|ULIM|LLIM|LAST|MAX|MIN|AVER|RMAX|RMIN|RAV>
:CSCanner:SSTandard:ATTRibutes? <string>
:CSCanner:SSTandard:CATalog?
:CSCanner:UPDate:STATe <0 | 1 | ON | OFF>
:DIAGnostic:SWEep:TIME?
:DISPlay:EXTernal:DEVices?
:DISPlay:IMPedance:MATCh:DEVice <NONe|M75|OTHer>
:DISPlay:IMPedance:MATCh:DEVice:CUSTom:LOSS <numeric_value> {DB}
:DISPlay:POINtcount <numeric_value>
:DISPlay:VIEW:SPECtrogram:AADJust
:DISPlay:VIEW:SPECtrogram:BOTTom <numeric_value> {<amplitude_units>}
:DISPlay:VIEW:SPECtrogram:HISTory[:DATA]? <numeric_value>
:DISPlay:VIEW:SPECtrogram:HISTory:ELAPsed? <numeric_value>
:DISPlay:VIEW:SPECtrogram:HUE <numeric_value>
:DISPlay:VIEW:SPECtrogram:REFerence <numeric_value> {<amplitude_units>}
:DISPlay:VIEW:SPECtrogram:TRACe:SELection <POSition|TIME>
:DISPlay:WINDow:TRACe:Y[:SCALe]:PDIVision <numeric_value>
:DISPlay:WINDow:TRACe:Y[:SCALe]:PDIVision <numeric_value>
:DISPlay[:WINDow]:TRACe:Y:SCALe:RLEVel <numeric_value> {<amplitude_units>}
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:RLEVel:AUTO[:IMMediate] <numeric_value> {DB}
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:RLEVel:OFFSet <numeric_value> {DB}
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:RLEVel:OFFSet <numeric_value> {DB}
:DISPlay[:WINDow]:TRACe:Y:SSCale:PDIVision <numeric_value> {DB}
:DISPlay[:WINDow]:TRACe:Y:SSCale:PDIVision <numeric_value> {DB}
:DISPlay[:WINDow]:TRACe:Y:SSCale:RLEVel <numeric_value> {DB}
:DISPlay[:WINDow]:TRACe:Y:SSCale:RLEVel <numeric_value> {DB}
:FETCh:ACPower?
:FETCh:AMPLitude? <numeric_value> {HZ | KHZ | MHZ | GHZ}
:FETCh:BPOWer?
:FETCh:CHPower?
:FETCh:CHPower:CHPower?
:FETCh:CHPower:DENSity?
:FETCh:CINTerference?
:FETCh:CINTerference:CIRAtio?
:FETCh:CINTerference:CPOWer?
:FETCh:CINTerference:IPOWer?
:FETCh[:DATA]:ALL? [<ASCii|INTeger|REAL>],[<numeric_value>]
:FETCh:INTerference:POWer?
:FETCh:OBWidth<n>?
:FETCh:OTA:MAPPing?
:FETCh:PEAK?
:FETCh:SEMask?
:FETCh:TRACe:STAT?
:FORMat[:TRACe][:DATA] <ASCii|INTeger|REAL>,[<numeric_value>]
:INITiate:CONTinuous <0 | 1 | ON | OFF>
:INITiate[:IMMediate]
:INITiate[:IMMediate]:ALL
:INITiate:SPA:SELFtest?
:INPut:OPOWer:RELay[:STATe] <CLOSed>
:INSTrument:ACTive:STATe <0 | 1 | ON | OFF>
:INSTrument:REMote:STATe <0 | 1 | ON | OFF>,<string>
:MEASure:ACPower?
:MEASure:CHPower?
:MEASure:CHPower:CHPower?
:MEASure:CHPower:DENSity?
:MEASure:CINTerference:CANCel
:MEASure:CINTerference:CONTinue
:MEASure:INTerference:POWer?
:MEASure:OTA:MAPPing?
:MEASure:OTA:MAPPing:RUN <0 | 1 | ON | OFF>
:MMEMory:LOAD:LIMit <string>,<string>,<string>
:MMEMory:LOAD:MAP <string>
:MMEMory:LOAD[:OTA]:MAPPing:KML <string>,<string>,<string>
:MMEMory:LOAD:RAM <numeric_value>,<numeric_value>,<string>
:MMEMory:LOAD:RECord <string>,<string>
:MMEMory:LOAD:SEMask:CUSTom <string>,<string>
:MMEMory:STOEvent:CLEarall
:MMEMory:STOEvent:EOSWeep:MODE <CONTinuous|SINGle>
:MMEMory:STOEvent:EOSWeep[:STATe] <0 | 1 | ON | OFF>
:MMEMory:STOEvent:LIMit:INTerval <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:MMEMory:STOEvent:LIMit:MODE <CONTinuous|SINGle|INTerval>
:MMEMory:STOEvent:LIMit:PTRigger[:STATe] <0 | 1 | ON | OFF>
:MMEMory:STOEvent:LIMit[:STATe] <0 | 1 | ON | OFF>
:MMEMory:STOEvent:TIMer:INTerval <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:MMEMory:STOEvent:TIMer[:STATe] <0 | 1 | ON | OFF>
:MMEMory:STORe:CSCanner:CSV:MSUS <string>
:MMEMory:STORe:CSCanner:CSV:PATH <string>
:MMEMory:STORe:LIMit <string>,<string>,<string>
:MMEMory:STORe[:OTA]:MAPPing:CSV <string>,<string>,<string>
:MMEMory:STORe[:OTA]:MAPPing:KML <string>,<string>,<string>
:MMEMory:STORe:RAM <numeric_value>,<numeric_value>,<string>
:MMEMory:STORe:RECord:CSV:DISCard
:MMEMory:STORe:RECord:CSV:MSUS <string>
:MMEMory:STORe:RECord:CSV:PATH <string>
:MMEMory:STORe:RECord:CSV:PREFix <string>
:MMEMory:STORe:RECord:MSUS <string>
:MMEMory:STORe:RECord:PATH <string>
:MMEMory:STORe:RECord:PREFix <string>
:MMEMory:STORe:TRACe:CSV <string>,<string>,<string>
:READ:ACPower?
:READ:CHPower?
:READ:CHPower:CHPower?
:READ:CHPower:DENSity?
:READ:INTerference:POWer?
:READ:OTA:MAPPing?
:READ:SEMask?
[:SENSe]:ACPower:BANDwidth|BWIDth:ADJacent <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:ACPower:BANDwidth|BWIDth:ALTernate <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:ACPower:BANDwidth|BWIDth:MAIN <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:ACPower:BANDwidth|BWIDth:SPACing <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:ACPower:STATe <0 | 1 | ON | OFF>
[:SENSe]:AMFM:AUDio:RECord
[:SENSe]:AMFM:AUDio:RECord:DURation <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:AMFM:AUDio:RESults?
[:SENSe]:AMFM:AUDio:STATe <0 | 1 | ON | OFF>
[:SENSe]:AMFM:DEMod:BWIDth?
[:SENSe]:AMFM:DEMod:FREQuency <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:AMFM:DEMod:MARKer:SELect <numeric_value>
[:SENSe]:AMFM:DEMod:MARKer:STATe <0 | 1 | ON | OFF>
[:SENSe]:AMFM:DEMod:TYPE <AM|USBand|LSBand|FMWideband|FMNarrowband|FM125|FM625>
[:SENSe]:AMFM:SQUelch <numeric_value> {<amplitude_units>}
[:SENSe]:AMFM:STATe <0 | 1 | ON | OFF>
[:SENSe]:AVERage:COUNt <numeric_value>
[:SENSe]:AVERage:TYPE <NORMal|MINimum|MAXimum|AVERage|RMAXimum|RMINimum|RAVerage|MATH>
[:SENSe]:BANDwidth|BWIDth[:RESolution] <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:BANDwidth|BWIDth[:RESolution] <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:BANDwidth|BWIDth[:RESolution]:RATio <numeric_value>
[:SENSe]:BANDwidth|BWIDth:VIDeo <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:BANDwidth|BWIDth:VIDeo <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:BANDwidth|BWIDth:VIDeo:RATio <numeric_value>
[:SENSe]:BANDwidth|BWIDth:VIDeo:TYPE <LINear|LOGarithmic>
[:SENSe]:BANDwidth[:RESolution]:AUTO <0 | 1 | ON | OFF>
[:SENSe]:BANDwidth:VIDeo:AUTO <0 | 1 | ON | OFF>
[:SENSe]:BPOWer:END <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:BPOWer:STARt <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:BPOWer:STATe <0 | 1 | ON | OFF>
[:SENSe]:CHPower:BANDwidth|BWIDth:INTegration <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:CHPower:STATe <0 | 1 | ON | OFF>
[:SENSe]:CINTerference:BANDwidth|BWIDth:INTegration <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:CINTerference:CARRier:STATe?
[:SENSe]:CINTerference:STATe <0 | 1 | ON | OFF>
[:SENSe]:CLOCk:ADJust <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:DETector[:FUNCtion] <POSitive|RMS|NEGative|SAMPle|NORMal>
[:SENSe]:DF:INFormation?
[:SENSe]:EIRPower:STATe <0 | 1 | ON | OFF>
[:SENSe]:FETch:THD?
[:SENSe]:FREQuency:CENTer <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:FREQuency:CENTer:SHARe <0 | 1 | ON | OFF>
[:SENSe]:FREQuency:LIMit?
[:SENSe]:FREQuency:OFFSet <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:FREQuency:SPAN <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:FREQuency:SPAN:FULL
[:SENSe]:FREQuency:SPAN:LAST
[:SENSe]:FREQuency:STARt <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:FREQuency:STEP[:INCRement] <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:FREQuency:STOP <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:FREQuency:SWEep:TIME <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:FREQuency:SWEep:TIMe:AUTO <0 | 1 | ON | OFF>
[:SENSe]:FSTRength:ANTenna <string>
[:SENSe]:FSTRength:ANTenna:FACTor?
[:SENSe]:FSTRength:ANTenna:FILE <block data>
[:SENSe]:FSTRength:ANTenna:LIST?
[:SENSe]:FSTRength:ANTenna:LIST:USER?
[:SENSe]:FSTRength:STATe <0 | 1 | ON | OFF>
[:SENSe]:FSTRength:STATe <0 | 1 | ON | OFF>
[:SENSe]:INTerference:BANDwidth|BWIDth:INTegration <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:INTerference:MAX <numeric_value> {<amplitude_units>}
[:SENSe]:INTerference:MIN <numeric_value> {<amplitude_units>}
[:SENSe]:INTerference:STATe <0 | 1 | ON | OFF>
[:SENSe]:MODE <SPECtrum|IASPectrum>
[:SENSe]:MODE:CATalog?
[:SENSe]:OBWidth:METHod <XDB|PERCent>
[:SENSe]:OBWidth:PERCent <numeric_value>
[:SENSe]:OBWidth:STATe <0 | 1 | ON | OFF>
[:SENSe]:OBWidth:XDB <numeric_value> {DB}
[:SENSe][:OTA]:MAPPing:CHP:THReshold[:DATA] <numeric_value> {<amplitude_units>}, {<numeric_value> {<amplitude_units>}}, ...
[:SENSe][:OTA]:MAPPing:CSCanner:BESt <0 | 1 | ON | OFF>
[:SENSe][:OTA]:MAPPing:CSCanner:INDex <numeric_value>
[:SENSe][:OTA]:MAPPing:DISTance:UNIT <METers|FEET>
[:SENSe][:OTA]:MAPPing:MEASurement <CHPower|PSDensity|RSSI>
[:SENSe][:OTA]:MAPPing:POINts?
[:SENSe][:OTA]:MAPPing:POINts:DELete
[:SENSe][:OTA]:MAPPing:POINts:STAT?
[:SENSe][:OTA]:MAPPing:POSition <string>
[:SENSe][:OTA]:MAPPing:PSD:THReshold[:DATA] <numeric_value> {<amplitude_units>}, {<numeric_value> {<amplitude_units>}}, ...
[:SENSe][:OTA]:MAPPing:REPeat:DISTance <numeric_value>
[:SENSe][:OTA]:MAPPing:REPeat:TIME <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe][:OTA]:MAPPing:REPeat:TYPE <TIME|DISTance>
[:SENSe][:OTA]:MAPPing:RSSI:THReshold[:DATA] <numeric_value> {<amplitude_units>}, {<numeric_value> {<amplitude_units>}}, ...
[:SENSe][:OTA]:MAPPing:STATe <0 | 1 | ON | OFF>
[:SENSe][:OTA]:MAPPing:TYPE <INDoor|OUTDoor>
[:SENSe]:POLar:CLEar
[:SENSe]:POLar:DATA?
[:SENSe]:POLar:DCOLlect <0 | 1 | ON | OFF>
[:SENSe]:POLar:STATe <0 | 1 | ON | OFF>
[:SENSe]:POWer:RF:ATTenuation <numeric_value> {DB}
[:SENSe]:POWer:RF:ATTenuation <numeric_value> {DB}
[:SENSe]:POWer:RF:ATTenuation:AUTO <0 | 1 | ON | OFF>
[:SENSe]:POWer:RF:ATTenuation:AUTO <0 | 1 | ON | OFF>
[:SENSe]:POWer:RF:GAIN:STATe <0 | 1 | ON | OFF>
[:SENSe]:POWer:RF:GAIN:STATe <0 | 1 | ON | OFF>
[:SENSe]:SEMask:CENTer:BWIDth <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:SEMask:MASK <GT38|LT38|W43|W41|W35|W31|WK43|WK41|WK35|WK30|LK24|LK22|LK20|NK38|NK35|NK28|NK24|CUSTom>
[:SENSe]:SEMask:MASK:CUSTom <string>,<block data>
[:SENSe]:SEMask:MASK:TYPe?
[:SENSe]:SEMask:RPOWer <numeric_value> {<amplitude_units>}
[:SENSe]:SEMask:RPOWer:STATe <0 | 1 | ON | OFF>
[:SENSe]:SEMask:STATe <0 | 1 | ON | OFF>
[:SENSe]:SWEep:TIME <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:SWEep:TIME:AUTO <0 | 1 | ON | OFF>
[:SENSe]:TDOMain:DISPlay:LENGth <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:TDOMain:DISPlay:STARt <numeric_value> {PS | NS | US | MS | S | MIN | HR}
[:SENSe]:TDOMain:STATe <0 | 1 | ON | OFF>
[:SENSe]:TDOMain:TRACe[:DATa]? [<ASCii|INTeger|REAL>],[<numeric_value>]
[:SENSe]:THD:FREQuency:FUNDamental <numeric_value> {HZ | KHZ | MHZ | GHZ}
[:SENSe]:THD:FREQuency:FUNDamental:AUTO <0 | 1 | ON | OFF>
[:SENSe]:THD:STATe <0 | 1 | ON | OFF>
[:SENSe]:TRIangulation:BEARing:SOURce <ANTenna|MANual>
[:SENSe]:TRIangulation:BEARing:VALue <numeric_value>
[:SENSe]:TRIangulation:CLEar
[:SENSe]:TRIangulation:DATA?
[:SENSe]:TRIangulation:REMove [<numeric_value>]
[:SENSe]:TRIangulation:STATe <0 | 1 | ON | OFF>
[:SENSe]:TRIangulation:TRIGger
:STATus:OPERation[:EVENt]?
:TRACe<n>:DETector[:FUNCtion] <POSitive|RMS|NEGative|SAMPle|NORMal>
:TRACe<n>:DISPlay[:STATe] <0 | 1 | ON | OFF>
:TRACe<n>:DISPlay:VIEW:SPECtrogram:ELAPsed?
:TRACe<n>:DISPlay:VIEW:SPECtrogram:POSition <numeric_value>
:TRACe<n>:DISPlay:VIEW:SPECtrogram:TIME <numeric_value>
:TRACe<n>:NORMalize <0 | 1 | ON | OFF>
:TRACe<n>:SWEep:COUNt[:CURRent]?
:TRACe<n>:TYPE <NORMal|MINimum|MAXimum|AVERage|RMAXimum|RMINimum|RAVerage|MATH>
:TRACe<n>:UPDate[:STATe] <0 | 1 | ON | OFF>
:TRACe:CLEar <numeric_value>
:TRACe:CLEar:ALL
:TRACe[:DATA]? <numeric_value>
:TRACe[:DATA]:ALL? [<ASCii|INTeger|REAL>],[<numeric_value>]
:TRACe:PLAYback <PLAY|STOP|PAUSe>
:TRACe:PLAYback:FILE?
:TRACe:PLAYback:INTerval <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:TRACe:PLAYback:LOOP <0 | 1 | ON | OFF>
:TRACe:PLAYback:POSition?
:TRACe:PLAYback:SEEK <numeric_value>
:TRACe:PLAYback:TAG <NEXT|PREVious|ADD|REMove|ALL>
:TRACe:PLAYback:TAGS? [<RECord|PLAYback>]
:TRACe:PLAYback:TAG:TABLe <0 | 1 | ON | OFF>
:TRACe:PRESet:ALL
:TRACe:RECord <RECord|STOP|PAUSe>
:TRACe:RECord:CSV:LINK <RECord|PLAYback|OFF>
:TRACe:RECord:CSV:STATe <RECord|STOP|PAUSe>
:TRACe:RECord:INTerval:MODE <AUTO|MANual>
:TRACe:RECord:INTerval:TIME <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:TRACe:RECord:LINK <0 | 1 | ON | OFF>
:TRACe:RECord:MODE <AUTO|TIMed>
:TRACe:RECord:TAG
:TRACe:RECord:TIME <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:TRACe:SELect <numeric_value>
:TRACe:SPECtrogram:DETector[:FUNCtion] <POSitive|RMS|NEGative|SAMPle|NORMal>
:TRACe:SPECtrogram:TYPE <NORMal|MINimum|MAXimum|AVERage|RMAXimum|RMINimum|RAVerage>
:TRACe:STATus? <numeric_value>
:TRIGger[:SEQuence]:ATRigger <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:TRIGger[:SEQuence]:ATRigger:STATe <0 | 1 | ON | OFF>
:TRIGger[:SEQuence]:DELay <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:TRIGger[:SEQuence]:DELay:STATe <0 | 1 | ON | OFF>
:TRIGger[:SEQuence]:HOLDoff <numeric_value> {PS | NS | US | MS | S | MIN | HR}
:TRIGger[:SEQuence]:HOLDoff:STATe <0 | 1 | ON | OFF>
:TRIGger[:SEQuence]:SLOPe <POSitive|NEGative>
:TRIGger[:SEQuence]:SOURce <EXT|IMMediate|VIDeo>
:TRIGger[:SEQuence]:VIDeo:HYSTeresis <numeric_value> {DB}
:TRIGger[:SEQuence]:VIDeo:LEVel <numeric_value> {<amplitude_units>}
:UNIT:CHPower:PSDensity <HZ|MHZ>
:UNIT:POWer <DBM|DBM/M2|DBW|DBW/M2|DBV|DBV/M|DBMV|DBMV/M|DBUV|DBUV/M|DBA|DBA/M|V|V/M|A|A/M|W|W/M2|W/CM2>
:UNIT:POWer <DBM|DBM/M2|DBW|DBW/M2|DBV|DBV/M|DBMV|DBMV/M|DBUV|DBUV/M|DBA|DBA/M|V|V/M|A|A/M|W|W/M2|W/CM2>
High Accuracy Power Meter Commands
:CALCulate:FORWard:LIMit:LOWer <numeric_value> {DBM}
:CALCulate:FORWard:LIMit:LOWer:FAIL?
:CALCulate:FORWard:LIMit:LOWer:PERCent <percent_value>
:CALCulate:FORWard:LIMit:UPPer <numeric_value> {DBM}
:CALCulate:FORWard:LIMit:UPPer:FAIL?
:CALCulate:FORWard:LIMit:UPPer:PERCent <percent_value>
:CALCulate:FORWard:RELative:STATe <0 | 1 | ON | OFF>
:CALCulate:LIMit:ALARm:STATe <0 | 1 | ON | OFF>
:CALCulate:LIMit:LOWer <numeric_value> {DBM}
:CALCulate:LIMit:LOWer:FAIL?
:CALCulate:LIMit:LOWer:PERCent <percent_value>
:CALCulate:LIMit:STATe <0 | 1 | ON | OFF>
:CALCulate:LIMit:UPPer <numeric_value> {DBM}
:CALCulate:LIMit:UPPer:FAIL?
:CALCulate:LIMit:UPPer:PERCent <percent_value>
:CALCulate:MAXHold:STATe <0 | 1 | ON | OFF>
:CALCulate:RELative:STATe <0 | 1 | ON | OFF>
:CALCulate:REVerse:LIMit:LOWer <numeric_value> {DBM}
:CALCulate:REVerse:LIMit:LOWer:FAIL?
:CALCulate:REVerse:LIMit:LOWer:PERCent <percent_value>
:CALCulate:REVerse:LIMit:UPPer <numeric_value> {DBM}
:CALCulate:REVerse:LIMit:UPPer:FAIL?
:CALCulate:REVerse:LIMit:UPPer:PERCent <percent_value>
:CALCulate:REVerse:RELative:STATe <0 | 1 | ON | OFF>
:CALibration:ZERO
:DISPlay:WINDow[:SCALe]:MAXimum <numeric_value> {DBM}
:DISPlay:WINDow[:SCALe]:MAXimum:PERCent <percent_value>
:DISPlay:WINDow[:SCALe]:MINimum <numeric_value> {DBM}
:DISPlay:WINDow[:SCALe]:MINimum:PERCent <percent_value>
:MMEMory:STORe:FDATa:CSV <string>,<string>
:SENSe:APERture <numeric_value>
:SENSe:APERture:MODE <HAT|LAT>
:SENSe:AVERage:COUNt <numeric_value>
:SENSe:AVERage:SWEep?
:SENSe:CCDFthreshold <numeric_value>
:SENSe:CORRection:EXTernal:GAIN <numeric_value> {DB}
:SENSe:CORRection:EXTernal:LOSS <numeric_value> {DB}
:SENSe:DUTYcycle <percent_value>
:SENSe:FREQuency <numeric_value> {HZ | KHZ | MHZ | GHZ}
:SENSe:FREQuency:SSTandard:CATalog?
:SENSe:FREQuency:SSTandard:NAME <string>
:SENSe:MAXHold:DATA?
:SENSe:MODType <NONE|GSM|SINGle|MULT|ISDB|CDMA>
:SENSe:POWer:DATA?
:SENSe:POWer:FORWard <FAVG|CRESt|BAM|PEAK|BAA|CCDF>
:SENSe:POWer:INLine:DATA?
:SENSe:POWer:REVerse <RAVG|REFL|RLOSs|VSWR>
:SENSe:SUMMary <0 | 1 | ON | OFF>
:SENSe:SWEep:MODE <CONTinuous|SINGle>
:SENSe:USBDevice:PSENsor:INFormation?
:SENSe:VBW <FULL|FOUR|TWO>
:TRIGger[:SEQuence][:REMote]:SINGle
:UNIT:POWer <DBM|WATTs>
SCPI Error Table
MS2070A/MS2080A Field Master™
SCPI Error Table
This site works best with JavaScript enabled