 | RUN/HOLD Runs or holds the sweep or measurement. SET ZERO REFERENCE Sets the zero reference data for the current measurement type and saves the current measurement and normalizes the main measurement display to the saved value. Turns on Zero Reference state. ZERO REFERENCE OFF Turns off Zero Reference state. TABLE POSITION Sets the selected index for the cable table display. Note that saving a measurement to the table will cause the selected index to automatically increment to the next open slot in the table starting from the slot that had just been saved. If there are no empty slots left in the table, the selected index will be kept at the index that was last saved. SAVE TABLE DATA Saves the table data at the specified table position. CLEAR TABLE DATA Clears the table data for the selected measurement type. CLEAR ALL TABLE DATA Clears the entire table data of the selected measurement type. | |