:SENSe{1-16}:BANDwidth Subsystem
The :SENSe{1-16}:BANDwidth subsystem command sets the IF bandwidth. Note that this command is the same as the :SENSe{1-16}:BWIDth command:
IF Configuration Subsystems
Related IF configuration and control subsystems are:
:SENSe{1-16}:BANDwidth[:RESolution] <NRf>
:SENSe{1-16}:BANDwidth[:RESolution]?
Description
The command sets the IF bandwidth for the given channel. The query outputs the IF bandwidth for the given channel.
Cmd Parameters
<NRf> The input parameter is in Hertz.
Query Parameters
<NR3> The output parameter is in Hertz.
Range
1 to 1E6. The system will automatically select the closest IF bandwidth from the following options:
• 1, 3, 10, 30, 100, 300 Hz
• 1, 3, 10, 30, 100, 300 kHz
• 1 MHz.
Default Value
1.00000000000E+003
Syntax Example
:SENS1:BAND 4
:SENS1:BAND?
Related Cmds