VectorStar™ MS4640A SeriesMicrowave Vector Network Analyzer : SCPI Commands : :SENSe{1-16}:SPUR Subsystem
 
:SENSe{1-16}:SPUR Subsystem
The :SENSe{1-16}:SPUR subsystem command is used to toggle spur reduction on and off on the indicated channel.
Channel and Sweep Subsystems
Related channel and sweep configuration and control subsystems are:
• :SENSe{1-16}:AVERage Subsystem
• :SENSe{1-16}:FREQuency Subsystem
• :SENSe{1-16}:SPUR Subsystem
• :SENSe{1-16}:SWEep Subsystem
 
:SENSe{1-16}:SPUR:REDuction[:STATe] <char1>
:SENSe{1-16}:SPUR:REDuction[:STATe]?
Description
Turns spur reduction on/off for the indicated channel. Outputs spur reduction on/off status for the indicated channel.
Cmd Parameters
<char1> 1 | 0 | ON | OFF
Query Parameters
<char1> 1 | 0
Range
NA
Default Value
0
Syntax Example
:SENS1:SPUR:RED ON
:SENS1:SPUR:RED?