Instruments that are ordered from the factory with a rack mount option arrive with the rack mount hardware pre-installed. Alternatively, the rack mount option may be ordered at a later time and installed whenever required by the user. The general procedure to install the rack mount kit is described below:
1. Disconnect the line cord and any other attachments from the instrument.
2. Carefully place the instrument on a secure and stable work surface.
The screws with green heads have metric threads. If it becomes necessary to replace any of these screws, always use the exact replacement green-headed screws to avoid damage to the instrument. The Anritsu part numbers for these metric-threaded screws are 905-8 (long) and Z-951102 (short).
Removing Instrument Handles and Feet for Rack Mount
Note
The rack installation figures are for generic instruments and may differ in general appearance.
