VectorStar® MS4640A Series VNAsMicrowave Vector Network Analyzers : General Information
 
General Information
 
Introduction
Programming Manual
Operation Manual
VectorStar MS464xA Series VNA Documentation Set
VectorStar VNA System Documentation List
VectorStar MS4640A Series Vector Network Analyzer
VectorStar ME7838A Series Modular BB/Millimeter-Wave VNA Measurement System
VectorStar ME7828A Series Standard BB/mm-Wave VNA Measurement System
VectorStar MN4690B Series Multiport VNA Measurement System
Calibration Kits
Verification and Performance Verification Software Kits
Introduction
This programming manual supplement provides information for remote operation of the VectorStar MS4640A Series VNAs using commands sent from an external controller via the IEEE 488 General Purpose Interface Bus (GPIB), USB, and Ethernet for Anritsu Lightning 37xxxX and HP 8510 commands. The following command listing chapters are provided:
• Anritsu Supported 37xxxX Commands
A complete listing of all supported Anritsu legacy Lightning (37xxxD/E) commands that can be used to control VectorStar VNA operation.
• Anritsu 37xxxX Non-Supported Commands
A listing of unsupported Lightning commands.
• HP8510 Supported Commands
A complete listing of all supported HP8510 commands.