VectorStar™ MS4640A Series Microwave Vector Network Analyzers : Application Menus - Multiple Source : Application Menu Variants for Multiple Source
 
Application Menu Variants for Multiple Source
APPLICATION Menu – Variants – For MS4642A, MS4644A, and MS4645A VNAs 
Multiple Source control buttons on the APPLICATION Menu.
1. For any MS4640A Series VNA without Option 007 – Receiver Offset.
2. For MS4642A, MS4644A, and MS4645A VNA with Option 007.
3. For MS4642A, MS4644A, and MS4645A VNA with Option 007 and Option 082/083 Millimeter-Wave.
 
APPLICATION Menu – Variants – For MS4647A VNAs
Multiple Source control buttons on the APPLICATION Menu.
1. APPLICATION Menu – MS4647A – with Option 007 Receiver Offset.
2. APPLICATION Menu – MS4647A – with Option 007 and Option 082/083 Millimeter-Wave.
3. APPLICATION Menu – MS4647A – with Option 007 and Option 080/081 Broadband/Millimeter-Wave.
See the other APPLICATION menu chapters for descriptions of other menu button selections.
 
Multiple Source
Part of the Receiver Configuration button selection group. Requires the installation of Option 007 – Receiver Offset. Select sets the Multiple Source receiver configuration and de-selects all other receiver configurations and their respective selection buttons.
If selected, use the Multiple Source Setup button described below to configure the multiple sources including external sources. For detailed information, see:
• Application Menus - Multiple Source
Multiple Source Setup
Present on all VNAs. Select displays the MULTIPLE SOURCE SETUP menu. Use this button if the Multiple Source Receiver Configuration was selected above.
• MULTIPLE SOURCE Menu below.