VectorStar™ MS4640A Series Microwave Vector Network Analyzers : Application Menus - Mixer Setup : Application Menu Variants for Mixer Setup
 
Application Menu Variants for Mixer Setup
APPLICATION Menu – Variants – For MS4642A, MS4644A, and MS4645A VNAs 
Mixer Setup buttons on the APPLICATION Menu.
1. For any MS4640A Series VNA without Option 007 – Receiver Offset.
2. For MS4642A, MS4644A, and MS4645A VNA with Option 007.
3. For MS4642A, MS4644A, and MS4645A VNA with Option 007 and Option 082/083 Millimeter-Wave.
 
APPLICATION Menu – Variants – For MS4647A VNAs
Mixer Setup buttons on the APPLICATION Menu.
1. APPLICATION Menu – MS4647A – with Option 007 Receiver Offset.
2. APPLICATION Menu – MS4647A – with Option 007 and Option 082/083 Millimeter-Wave.
3. APPLICATION Menu – MS4647A – with Option 007 and Option 080/081 Broadband/Millimeter-Wave.
See the other APPLICATION menu chapters for descriptions of other menu button selections.
Mixer Setup (Active Channel Mixer Setup)
Select displays the single channel version of the mixer setup, the MIXER SETUP [SWEEP TYPE] dialog boxes. The setup allows setting the sweep type, the port correspondence to RF and IF, and the signal source for the LO. There are separate setup configurations for frequency-based sweep and power-based sweep.
• MIXER SETUP – ACTIVE CHANNEL Dialog Box Variants
Mixer Setup (Multi-Channel Mixer Setup)
Select displays the MIXER SETUP CONFIGURATION dialog boxes. The mixer setup dialogs provide setup guidance for different mixer types, and supports measurement of various parameters on different channels. Once the mixer configuration and measurement requirements are input, the system responds with the necessary calibrations required. The mixer measurement configuration can be saved and recalled.
• MIXER SETUP – MULTI-CHANNEL Dialog Box Variants