VectorStar™ MS4640A Series Microwave Vector Network Analyzers : Application Menus - Mixer Setup
 
Application Menus - Mixer Setup
 
Chapter Overview
Other Application Menu Chapters
Application Menus and Mixer Dialog Boxes
Application Menu Variants for Mixer Setup
Mixer Setup Dialog Overview
Mixer Setup Procedure Variants
ACTIVE CHANNEL Dialog Box – Frequency-Based Sweep
Mixer Setup – Active Channel – Linear/Log Frequency Sweep – Menu Set
Mixer Setup – Active Channel – Information Required
Mixer Setup – Active Channel – Frequency Sweep – Procedure
ACTIVE CHANNEL Dialog Box – Power-Based Sweep
Mixer Setup – Active Channel – Power Sweep – Menu Set
Mixer Setup – Active Channel – Power Sweep – Information Required
Mixer Setup – Active Channel – Power Sweep – Procedure
MULTI-CHANNEL – Frequency-Based Sweep
Mixer Setup – Multi-Channel – Frequency Sweep – Menu Set
Mixer Setup – Multi-Channel – Frequency Sweep – Available Measurements
Mixer Setup – Multi-Channel – Frequency Sweep – Channel Assignments
Mixer Setup – Multi-Channel – Frequency Sweep – Procedure
MULTI-CHANNEL – Power-Based Sweep
Mixer Setup – Multi-Channel – Power Sweep – Menu Set
Mixer Setup – Multi-Channel – Power Sweep – Available Measurements
Mixer Setup – Multi-Channel – Power Sweep – Channel Assignments
Mixer Setup – Multi-Channel – Power Sweep – Procedure
Chapter Overview
This chapter provides information for the APPLICATION menu and its configuration controls for NxN setup. Other Application Menu Chapters
Other Application Menu Chapters
The other chapters in this manual on APPLICATION menus with specific application feature focus are:
• Application Menus - Overview
• Application Menus - Multiple Source
• Application Menus - Broadband/Millimeter-Wave
• Application Menus - Noise Figure
• Application Menus - NxN
 
Application Menus and Mixer Dialog Boxes
Note 
The Mixer Setup buttons are not present when the VNA is in 4-Port mode.
• Application Menu Variants for Mixer Setup
• Figure: APPLICATION Menu – Variants – For MS4642A, MS4644A, and MS4645A VNAs
• Figure: APPLICATION Menu – Variants – For MS4647A VNAs
• Mixer Setup Dialog Overview
• MIXER SETUP – ACTIVE CHANNEL Dialog Box Variants
• ACTIVE CHANNEL Dialog Box – Frequency-Based Sweep
• ACTIVE CHANNEL Dialog Box – Power-Based Sweep
• MIXER SETUP – MULTI-CHANNEL Dialog Box Variants
• MULTI-CHANNEL – Frequency-Based Sweep
• MULTI-CHANNEL – Power-Based Sweep