Cable and Antenna Analyzer for Anritsu’s RF and Microwave Handheld Instruments : Cable and Antenna Analyzer : Freq/Dist Menu
  
Freq/Dist Menu
The Freq/Dist main menu key opens the Freq menu, or the Freq/Dist menu, depending upon the type of measurement selected with the Measurement Menu.
Pressing the Freq/Dist main menu key after selection of DTF Return Loss or DTF VSWR on the Measurement main menu will display the menu below.
Key Sequence: Freq/Dist
Freq/Dist Menu
Start Freq
Press the Start Freq submenu key and enter the desired start frequency using the keypad, the arrow keys, or the rotary knob.
Stop Freq
Press the Stop Freq submenu key and enter the desired stop frequency using the keypad, the arrow keys, or the rotary knob.
DTF Aid
Opens the DTF Aid dialog box (Figure: DTF Aid) for entering parameters.
Units
Toggles between meters and feet.
More
Opens the DTF Setup Menu.