Cable and Antenna Analyzer for Anritsu’s RF and Microwave Handheld Instruments : Cable and Antenna Analyzer : Freq/Dist Menu : DTF Setup Menu
  
DTF Setup Menu
Key Sequence: Freq/Dist > More
DTF Setup Menu
Cable Loss
Press the Cable Loss submenu key and enter the loss in dB/ft or dB/m for the selected cable using the keypad, the arrow keys, or the rotary knob and press Enter.
Prop Velocity
Press the Prop Velocity submenu key and enter the applicable propagation velocity for the selected cable using the keypad, the arrow keys, or the rotary knob and press Enter.
Cable
The Cable submenu key opens a list of available cable specifications (see Figure: Cable List). Using the arrow keys, the rotary knob, or the touch screen, select the desired cable and press Enter.
Note: When a cable is selected from this list, propagation velocity and cable loss are automatically set by the unit.
Windowing
Opens the Windowing menu. Options are:
Rectangular
Nominal Side Lobe
Low Side Lobe
Minimum Side Lobe
Refer to Appendix A for more information on windowing.
Back
Returns to Freq/Dist Menu.