The Pass / Fail mode allows selection of a user‑defined file that specifies a list of measurements with Pass / Fail criteria. In this mode, the instrument steps in sequence through the appropriate measurements and indicates a pass or fail state based upon the criteria. Using Master Software Tools (MST), a custom test list can be created and uploaded into the instrument. All of the critical measurements are available and can be selected for Pass / Fail testing. The results are displayed in a table format with clear identification of Pass / Fail results, including minimum and maximum thresholds and measured results. The sample image in Figure: Mobile WiMAX Pass/Fail Measurement Display may differ from any image on your instrument.