3GPP Signal Analyzer for Anritsu RF and Microwave Handheld Instruments : W-CDMA/HSPA+ Signal Analyzer : Setup Menu
  
Setup Menu
Setup 1/2 Menu
Key Sequence: Setup
W-CDMA/HSPA+ Setup Menu (1/2)
 
 
Scrambling Code: Press the Scrambling Code submenu key to toggle between Auto or Manual Scrambling Code. Auto Scrambling Code determines the scrambling code automatically.
Manual Scrambling Code: Press the Manual Scrambling Code submenu key to manually enter the scrambling code using the number keys or the rotary knob.
Max Spreading Factor: Press the Max Spreading Factor submenu key to toggle between 256 codes and 512 codes.
 
 
 
S‑CCPCH Spread: Press the S‑CCPCH Spread submenu key to enable the S‑CCPCH spreading factor and enter the desired code. The default value is 256.
S‑CCPCH Code: Press the S‑CCPCH Code submenu key to enable and enter the S‑CCPCH code. The default value is 3.
PICH Code: Press the PICH Code submenu key to activate Paging Indicator Channel and enter the desired code. The default value is 16.
More: Lists the Setup 2/2 Menu to continue measurement setup.
Setup 2/2 Menu
Key Sequence: Setup > More
W-CDMA/HSPA+ Setup Menu (2/2)
 
 
Threshold: Sets the measurement threshold to be set either automatically by the instrument or manually by the user.
Manual Threshold: Change the measurement threshold manually by entering a desired value and pressing Enter.
Max Amp Pwr: Sets the maximum transmit power of the base station.
CPICH Pwr: Sets the power of the CPICH.
Freq Err Avg: Turns on averaging for the frequency error measurement.
Freq Err Avg Cnt: Sets the number of measurements to use in the frequency error averaging calculations. The number can be set from 2 to 15.
Sync Type: Selects between CPICH or No CPICH for synchronization.
 
 
 
Back: Returns to the Setup 1/2 Menu.