3GPP Signal Analyzer for Anritsu RF and Microwave Handheld Instruments : TD‑LTE Signal Analyzer : Measurements Menu : OTA Scanner Menu
  
OTA Scanner Menu
Key Sequence: Measurements > Over‑the‑Air > Scanner > Scanner
TD‑LTE OTA Scanner Menu
Sort By: Opens the Sort By list dialog. Choose one of the following parameters to sort the Scanner table rows.
Cell ID
Group ID
Sector ID
S‑SS Power
RSRP
RSRQ
SINR
Show Mod Results (Demod option required on some instruments): Displays in table format the following measurements and information.
Ref. Signal (RS) Power
Sync Signal (SS) Power
EVM (rms)
EVM (pk)
Freq Error
Freq Error (ppm)
Carrier Frequency
Cell ID
Bar‑Graph: Opens the Bar Graph menu to select the parameter to be displayed in the last Bar‑Graph column: SS Power, RSRP, RSRQ or SINR. Press Back to return to the OTA Scanner menu.
Auto Save: Use this submenu key to automatically save measurement records. The instrument logs a data record at the end of each measurement cycle. A maximum 10,000 records can be stored in a file.
Files are automatically saved to instrument’s “Current Location” selection in the subdirectory /Internal Memory/user. Refer to the File Management chapter in your instrument’s User Guide for instructions on setting the “Current Location” for saving files.
File names are automatically created:
Yyyymmddhhnnss.tdlte
example: 2009081122332244.tdlte
y - year, 2009, m - month, 08, d - day, 11, h - hour, 22, n - minutes, 33
s - seconds, 44
Note: GPS coordinates are saved in addition to the measurement results, if GPS is on and a fix is established.
Back: Press this submenu key to return to the Over‑the‑Air Menu.