PIM Master™ Passive Intermodulation Analyzer : Distance‑to‑PIM™ (DTP) : Freq/Dist Menu
  
Freq/Dist Menu
Key Sequence: Freq/Dist.
Freq/Dist Menu
 
Carrier F1
Press the Freq/Dist main menu key followed by the Carrier F1 submenu key and enter the desired frequency using the keypad, the arrow keys, or the rotary knob. If the frequency is outside of the range of the PIM Master model, Figure: IMx Frequency Range Error Messages will display. Enter a frequency within the acceptable range by referring to Table: PIM Master Models. Press ESC to clear the error message.
Carrier F2 Start
Press this submenu key to set the start frequency of the swept carrier source.
Carrier F2 Stop
Press this submenu key to set the stop frequency of the swept carrier source.
 
 
DTP Aid
Press this submenu key to open the DTP Parameters window and the DTP Aid submenu to set up the test parameters for DTP testing.
 
Units
Press this submenu key to toggle the units setting between meters and feet. The selection is underlined.
 
More
Press this submenu key to open the DTP Setup menu.
Carrier F1 and Carrier F2 settings can also be initiated by highlighting their values in the DTP Parameters window. Refer to Figure: DTP Parameters Window.