Press Save then the Change Save Location submenu keys and select the location to save files. You can save files to the internal memory or to an external USB flash drive. You can also create new folders. If an external USB flash drive is connected or disconnected, press Refresh Directories to update the location tree. Press the Set Location key to store the save location.

The Save Measurement As key is used to quickly save measurements with a specific file name. The BTS Master saves the measurement with the latest file name that was used to save a measurement and with a number that is automatically incremented and appended to the end of the file name. For instance, if the last measurement was saved with the name Site 1 Trace, Save Measurement As saves the next measurement as Site 1 Trace_#1, Site 1 Trace_#2, etc. The file name used can be changed using the Save Menu.

Press the Save Measurement key and enter the name for the measurement file. The file type will default to measurement and the appropriate extension will be added based on the current measurement mode.

Press the Save submenu key, type a name for the setup file, confirm that the file type is Setup using the Change Type key and press Enter to save.

Press the Save submenu key, type a name for the JPEG file, confirm that the file type is Jpeg using the Change Type key and press Enter to save.