Site MasterCable and Antenna Analyzer with Spectrum Analyzer User Guide : General Information : Instrument Description
 
Instrument Description
The Site Master S331E/S361E is a handheld cable and antenna analyzer designed to make Return Loss, VSWR, Cable Loss, and Distance-To-Fault (DTF) measurements in the field. The cable and antenna analyzer also includes 1‑port phase and smith chart measurements. The 2-port transmission measurement option includes two power levels and access to a built-in 32 volt bias tee (Option 10).
The S332E/S362E is an integrated multi-functional test instrument that eliminates the need to carry and learn multiple test sets. In addition to the cable and antenna measurements, the S332E/S362E can be configured to include a Spectrum Analyzer, 2‑port Transmission Measurement, Interference Analyzer with Interference Mapping capabilities, Coverage Mapping, Channel Scanner, CW Signal Generator, AM/FM/PM Analyzer, PIM Analyzer, Power Meter, and High Accuracy Power Meter. A GPS receiver can be added to both the S331E/S361E and the S332E/S362E Site Master models.
The bright 8.4 in TFT color display provides easy viewing in a variety of lighting conditions. All Site Master models are equipped with a Li‑Ion battery delivering more than four hours of battery life for the S331E/S361E and more than three hours of battery life for the S332E/S362E Site Masters.
The combination of a touch screen and keypad enables users to navigate menus with the touch screen and enter numbers with the keypad.
The internal memory is large enough to store approximately 2,000 traces or setups. Measurements and setups can also be stored in a USB flash drive or transferred to a PC using the included USB cable. Ethernet connectivity is available using Option 413.
Note 
Not all after‑market USB drives are compatible with the instrument. Many drives come with a second partition that contains proprietary firmware. This partition must be removed. Only one partition is allowed. Refer to the individual manufacturer for instructions on how to remove it. You may also try reformatting a drive that contains a single partition using FAT32 format.
Available Models
Table: Site Master Models lists the Site Master models described in this User Guide.
Site Master Models
Model
Frequency Range
S331E
Cable & Antenna Analyzer, 2 MHz to 4 GHz
S332E
Cable & Antenna Analyzer, 2 MHz to 4 GHz
Spectrum Analyzer, 9 kHz to 4 GHz
S361E
Cable & Antenna Analyzer, 2 MHz to 6 GHz
S362E
Cable & Antenna Analyzer, 2 MHz to 6 GHz
Spectrum Analyzer, 9 kHz to 6 GHz
Available Options
Available options for the Site Master are shown in Table: Available Options.
Available Options
S331E
S332E
S361E
S362E
Description
S331E-0010
S332E-0010
S361E-0010
S362E-0010
Bias-Tee (requires Option 21 on S331E and S361E)
S331E-0019
S332E-0019
S361E-0019
S362E-0019
High-Accuracy Power Meter(1)
S331E-0021
S332E-0021
S361E-0021
S362E-0021
2-Port Transmission Measurement
 
S332E-0025
 
S362E-0025
Interference Analyzer(2)
 
S332E-0027
 
S362E-0027
Channel Scanner
 
S332E-0028
 
S362E-0028
C/W Signal Generator (requires
CW Signal Generator Kit)
 
S332E-0029
 
S362E-0029
Power Meter
S331E-0031
S332E-0031
S361E-0031
S362E-0031
GPS Receiver (requires Anritsu GPS Antenna)
 
S332E-0090
 
S362E-0090
Gated Sweep
S331E-0098
S332E-0098
S361E-0098
S362E-0098
Standard Calibration to ISO17025 and ANSI/NCSL Z540-1. Includes calibration certificate.
S331E-0099
S332E-0099
S361E-0099
S362E-0099
Premium Calibration to ISO17025 and ANSI/NCSL Z540-1. Includes calibration certificate, test report, and uncertainty data.
S331E-0413
S332E-0413
S361E-0413
S362E-0413
Ethernet Connectivity
 
S332E-0431
 
S362E-0431
Coverage Mapping(2)
 
S332E-0444
 
S362E-0444
EMF Measurements (requires Anritsu Isotropic Antenna)
 
S332E-0509
 
S362E-0509
AM/FM/PM Analyzer
S331E-0752
S332E-0752
S361E-0752
S362E-0752
CPRI LTE RF Measurements (requires Option 759)
S331E-0753
S332E-0753
S361E-0753
S362E-0753
OBSAI LTE RF Measurements (requires Option 759)
S331E-0759
S332E-0759
S361E-0759
S362E-0759
RF over Fiber Hardware (requires Option 752 or 753)
1. Requires External Power Sensor.
2. Requires Option 31.