Measure Press this key to perform RRH-based measurements and display the results for Return Loss and VSWR. See Figure: Return Loss/VSWR Measurement Results. Return Loss Limit Press this key, then use the numeric keypad, the arrow keys, or the rotary knob to set the return loss limit (in dB). The test Pass/Fail status is determined by the measured return loss and the specified limit. VSWR Limit Press this key, then use the numeric keypad, the arrow keys, or the rotary knob to set the VSWR limit. The test Pass/Fail status is determined by the measured VSWR and the specified limit. Back Returns to the BBU RF Test Menu. |