3GPP2 Signal Analyzer Measurement Guide : CDMA Signal Analyzer
 
CDMA Signal Analyzer
 
Introduction
General Measurement Setup
CDMA Measurement Setup
PN Select Setup
Walsh Codes Setup
GPS Setup
CDMA RF Measurement Setup
Channel Spectrum Setup
Spurious Emission Setup
ACPR Setup
CDMA Demodulator Measurements Setup
CDP Setup
CDP Table View Setup
CDMA Over-The-Air Measurement Setup
Pilot Scan Setup
Multipath Setup
Limit Test Setup
Pass Fail Setup
CDMA Measurement Descriptions
RF Measurements
Demodulator Measurements
OTA Measurements
CDMA Menus
Freq (Frequency) Menu
Amplitude Menu
Setup Menu
PN Setup Menu
Measurements Menu
RF Measurements Menu
ACPR Menu
Demodulator Menu
CDP Menu
Over-The-Air Menu
Limit Test Menu
Pass Fail Mode Menu
Marker Menu
Sweep Menu
Measure Menu
Trace Menu
Limit Menu
Other Menus
Introduction
The instrument offers three CDMA measurement options:
• cdmaOne/CDMA2000 1X RF measurements
• cdmaOne/CDMA2000 1X demodulation
• cdmaOne/CDMA2000 1X Over-the-Air (OTA) measurements, requires Option 31
The instrument can measure CDMA signals over the air (OTA) with an antenna or by directly connecting the instrument to the base station.