WiMAX Signal Analyzer Measurement Guide : Fixed WiMAX Signal Analyzer : Fixed WiMAX RF Measurements
 
Fixed WiMAX RF Measurements
Fixed WiMAX RF Measurements include these three measurement types: Spectrum, Power versus Time, and Adjacent Channel Leakage Ratio (ACPR). The following sections describe how to make Fixed WiMAX RF measurements.
Setup for Fixed WiMAX RF Measurements
1. Press the Setup main menu key.
2. Set the bandwidth, frame length, and CP Ratio as described in the General Measurement Setups.
Spectrum
The Spectrum screen displays the spectrum of the input signal and of channel power in dBm and displays the occupied bandwidth in Hz.
Procedure:
1. Setup the measurement as described in Setup for Fixed WiMAX RF Measurements.
2. Press the Measurements main menu key.
3. Press the RF Measurements key.
4. Press the Spectrum submenu key to activate the spectrum measurement. The sample image in Figure: Spectrum may differ from any image on your instrument.
Spectrum