Backhaul Analyzer Measurement Guide : T1/FT1 Analyzer (Option 51 or 54)   : Measurements Menu
 
Measurements Menu
When not active, some submenu keys have no arrow to indicate a sub menu, and the circular indicator has a plain background. The circular indicator with a red background and the sub menu arrow appear only when these submenu keys are active.
Key Sequence: Measurements
Measurements Menu
BERT
Press this submenu key to open the BERT Menu and select the display type for viewing test results, choosing from: Table, Histogram, or Event List.
Rx Signal
Press this submenu key to display Rx Signal measurements.
VF
Press this submenu key to display VF level measurements. Press the submenu key again to open the VF Menu for configuration.
Measure Time
This submenu key opens a dialog box to set the measurement time. Choose from 12 settings, which range from 1 minute (minimum) to 3 days (maximum). You can also choose Manual, which runs any length of time, indefinitely, until the Stop/Start main menu key is pressed. Use the arrow keys or the rotary knob to enter a value, and then press Enter or the Rotary Knob to continue, or press Esc to abort.
Clear History
Press this submenu key to erase the history of displayed events and measurements. Also, clears any red History indicators in the yellow‑highlighted, upper portion of the measurement display.
Save Results
Press this submenu key to save the results of a measurement. See Chapter 3 of the User Guide for more information.