The remainder of this chapter provides descriptions of all available submenu keys in the Easy Measurement mode and the Custom Measurement mode. Individual menu descriptions include the key sequence that causes the menu to be displayed.

In some Anritsu manuals, main menu keys may also be called hard keys, and submenu keys may also be called soft keys.

All possible submenu keys are displayed in menu images, although some keys are displayed only under unique setup conditions. The individual menu descriptions contain explanations of such keys.

Frequency/Level menus vary depending upon the Channel Map selection and the Custom or Easy setting.

 

Frequency/Level menus vary depending upon the Channel Map selection and the Custom or Easy setting.

 

 

While in Easy Measurement mode or Custom Measurement mode, press the Meas Selection main menu key to open the Meas Selection (1/2) menu, then press the More submenu key to open the Meas Selection (2/2) menu. These two menus have the same submenu keys in both Custom Measurement mode and Easy Measurement mode.

While in Batch Measurement mode the Meas Selection menu (shown in Figure: Measurement Selection Menus — Custom, Easy, or Batch) is the only menu that is available when pressing the Meas Selection main menu key.

While preparing for a Field Strength measurement in Easy Measurement mode or Custom Measurement mode, press the Meas Setup main menu key to open the Meas Setup menu. The Meas Mode submenu key is not available in Easy Measurement mode, which uses continuous measurement only.

 

When the measurement selection is Modulation Analysis, the Meas Setup menu for Easy Measurement mode displays the Sub‑carrier MER submenu key only when the Constellation measurement view is selected. When Delay Profile measurement view is selected, only 2 submenu keys are displayed (Constellation and Delay Profile).