Digital Television Signal Analyzer Measurement Guide : ISDB‑T Signal Analyzer : Measurement Selection Menus
 
Measurement Selection Menus
Meas Selection (1/2) Menu (Custom and Easy)
Select from this menu one of the seven measurement types: Field Strength, Modulation Analysis, Spectrum Mask, Phase Noise, Spurious Emissions, BER, or Spectrum Monitor. Your selection determines the list of submenu keys that will be displayed in the Meas Setup menu. A red circle at the upper right of a submenu key denotes the active measurement.
Key Sequence: Meas Selection
Measurement Selection (1/2) Menu (Custom and Easy)
 
 
Field Strength
Press this submenu key to begin Field Strength measurements and to display the Field Strength measurement screen.
Modulation Analysis
Press this submenu key to begin Modulation Analysis measurements and to display the Modulation Analysis measurement screen.
 
Spectrum Mask
Press this submenu key to begin Spectrum Mask measurements and to display the Spectrum Mask measurement screen.
Phase Noise
Press this submenu key to begin Phase Noise measurements and to display the Phase Noise measurement screen.
 
 
Spurious Emissions
Press this submenu key to begin Spurious Emissions measurements and to display the Spurious Emissions measurement screen.
BER
Press this submenu key to enable BER measurements and to display the BER Measurement screen. This submenu key is displayed only if Option 79 is installed.
Spectrum Monitor
Press this submenu key to begin Spectrum Monitor measurements and to display the Spectrum Monitor measurement screen.
 
More
Press this submenu key to open the Meas Selection (2/2) Menu (Custom and Easy).
 
Meas Selection (2/2) Menu (Custom and Easy)
While in Custom or Easy Measurement mode, this Meas Selection (2/2) menu is available from the Meas Selection (1/2) Menu (Custom and Easy). When in Batch Measurement mode, this is the only Meas Selection menu that is available when you press the Meas Selection main menu key.
Key Sequence (in Custom or Easy Measurement mode): Meas Selection > More
Key Sequence (in Batch Measurement mode): Meas Selection
Measurement Selection (2/2) Menu (Custom and Easy)
 
Easy and Custom Measurement mode Meas Selection (2/2) menu
 
Batch
Press this submenu key to use Batch Measurement setup mode. Batch Measurement allows you the option to run multiple tests for multiple channels. The Batch Measurement setup consists of a combination of minimal setup procedures and default measurement parameters. You are allowed to select channels from either the UHF or UHF (Brazil) channel maps.
Easy
Press this submenu key to use Easy Measurement setup mode. As in the Batch Measurement setup, the Easy setup consists of a combination of minimal setup procedures and default measurement parameters.
Custom
Press this submenu key to use Custom Measurement setup mode. Custom Measurement setup provides manual access to all available instrument functions and settings.
Back
From Custom or Easy Measurement setup, press this submenu key to return to the Meas Setup (1/2) menu.
 
Measurement Mode Selection Menus
Measurement Selection Menus — Custom, Easy, or Batch
While in Batch Measurement mode this Meas Selection menu (in Figure: Measurement Selection Menus — Custom, Easy, or Batch) is the only menu that is available when pressing the Meas Selection main menu key.
While in Easy Measurement mode or Custom Measurement mode, press the Meas Selection main menu key to open the Meas Selection (1/2) menu, then press the More submenu key to open the Meas Selection (2/2) menu.