Set the Frequency
1. Press the Freq/Dist main menu key.
2. Press the Start Freq submenu key and use the numeric keypad, rotary knob, or the arrow keys to enter the start frequency.
3. Press the Stop Freq submenu key and enter the stop frequency.
Set the Amplitude
1. Press the Amplitude main menu key.
2. Press the Top submenu key and use the numeric keypad, rotary knob, or the arrow keys to adjust the top scale value as needed.
3. Press the Bottom submenu key and change the bottom scale value if needed.
Note | For Amplitude in Smith Chart measurements, refer to “Smith Chart” in the Cable & Antenna Measurement Guide listed in Measurement Guides. |