The RF Summary displays the critical RF transmitter performance measurements in a table format, without demodulating the TD‑SCDMA/HSDPA signal. The parameters that are displayed in the RF summary table are Channel Power (dBm), Channel Power (RRC) (dBm), Occupied Bandwidth (Hz), DwPTS Power (dBm), UpPTS Power (dBm), On/Off Ratio (dB), Slot PAR (dB), Left Channel Power (dBm), Right Channel Power (dBm), Left Channel Occupied Bandwidth, and Right Channel Occupied Bandwidth.
1. Press the Setup main menu key.
a. Press the Slot Selection submenu key. The Slot Selection window and menu open. In the list window, use the rotary knob or press the touch screen to highlight Auto or the desired slot (0 to 6), then press the Enter key.
b. Press the Trigger submenu key. The Trigger menu opens.
1. Press the Trigger Type submenu key to toggle through the three trigger types: No Trig, GPS, and Ext. The active state is underlined on the face of the submenu key.
2. Press the Ext Trigger Polarity submenu key to select either Rising or Falling trigger edge.
3. Press the Back submenu key to return to the Setup menu.
c. Press the Uplink Switch Point submenu key. The numerical value on the face of the submenu key turns red and is ready to be edited. Use the arrow keys or the rotary knob to change the value. You can also use the numeric keypad, then press Enter.
d. Press the More submenu key to continue with setups under the Advanced Settings menu.
e. Press the Number of Carriers submenu key to select the number of carriers present in the signal (1 or 3).
f. Press the Back submenu key to return to the Setup menu.
2. Press the Measurements main menu key.
3. Press the RF Measurements submenu key.
4. In the RF Measurements menu, press the RF Summary submenu key to view the primary RF measurements in a table.