3GPP Signal Analyzer Measurement Guide : TD‑SCDMA/HSDPA Signal Analyzer
 
TD‑SCDMA/HSDPA Signal Analyzer
 
Introduction
General Measurement Setups
TD‑SCDMA/HSDPA RF Measurements
Measurement Setup
Channel Spectrum
Power versus Time
RF Summary
TD‑SCDMA/HSDPA Demodulator
Measurement Setup
CDP and CDE
TD‑SCDMA/HSDPA Over‑the‑Air Measurements
Measurement Setup
TD‑SCDMA/HSDPA Pass/Fail Measurements
Measurement Setup
TD‑SCDMA/HSDPA Menus
Freq (Frequency) Menu
Amplitude Menu
Setup Menu
Slot Selection Menu
Trigger Menu
SYNC‑DL Code Menu
Scrambling Code Menu
Max Users Menu
Advanced Settings Menu
Measurements Menu
RF Measurements Menu
Power vs. Time Menu
Demodulator Menu
Over‑The‑Air Menu
Pass Fail Mode Menu
Sweep Menu
Measure Menu
Trace Menu
Limit Menu
Other Menus
Introduction
The TD-SCDMA/HSDPA Signal Analyzer offers three options:
RF Measurements
Demodulator
Over-The-Air (OTA) Measurements
Three display types are provided for RF Measurements: Channel Spectrum display, Power versus Time display, or the RF Summary table.
Demodulator measurements can be viewed in either the CDP Data display or the Modulation Summary table.
The Over‑the‑Air Code Scan measurement displays the power of all 32 sync codes in sequential order. The Tau Scan measurement displays the codes based on Tau values.