RF Measurements: Press this submenu key to display the RF Measurements Menu.

Demodulator: Press this submenu key to display the Demodulator Menu and to set up demodulator testing.

OTA: Press this submenu key to display the Over‑The‑Air Menu.

Pass Fail Mode: Press this submenu key to activate the Pass/Fail test. Press this submenu key again to display the Pass Fail Mode Menu and set up pass/fail testing.

TD‑SCDMA Summary: Press this submenu key to display a table of the TD‑SCDMA measurements. The following measurement values are displayed in the table:

Channel Power
Occ BW
Slot Power
DwPTS Power
UpPTS Power
On/Off Ratio
Freq Error
Freq Error PPM
EVM
Peak CDE
Tau

Save Measurement: Press this submenu key to save a measurement. You may accept the default filename or enter your own filename. Refer to your instrument’s User Guide for information on file management functions.