Slot Selection: Press this submenu key to display the Slot Selection Menu and open the Slot Selection window. Use the rotary knob or press the touch screen to highlight the desired slot (0 to 6), then press Enter. If Auto is selected, the active slot is automatically detected.

Trigger: Opens the Trigger Menu. Press this submenu key to list the Trigger menu, to set up the trigger parameters, and to set up the Tau Offset.

Uplink Switch Point: Press this submenu key to set an uplink switch point. This is the slot number of the last uplink timeslot. Slots from the next timeslot to the end of the sub‑frame are considered downlink. Use the rotary knob or the arrow keys to change the value, which ranges from 0 through 6, where 0 is no uplink. The default value is 3.

SYNC‑DL Code: Press this submenu key to display the SYNC‑DL Code Menu and open the SYNC‑DL Code selection window. Use the rotary knob or press the touch screen to highlight the desired code (0 through 31), then press Enter. If Auto is selected, the active SYNC‑DL code is applied.

Scrambling Midamble Code: Press this submenu key to display the Scrambling Code Menu and open the Scrambling/Midamble Code selection window. Use the rotary knob or press the touch screen to highlight the desired code (0 through 127), then press Enter. If Auto is selected, the active Scrambling/Midamble code is applied.

Max Users: Press this submenu key to display the Max Users Menu and open the Maximum Users selection window. Use the rotary knob or press the touch screen to highlight the desired number of users (2 through 16), then press Enter. If Auto is selected, the maximum number of users is listed.

Meas Speed: Press this submenu key to select the desired scan speed: Fast, Normal, or Slow. The active state is underlined on the face of the submenu key.

More: Opens the Advanced Settings Menu.