3GPP Signal Analyzer Measurement Guide : TD‑SCDMA/HSDPA Signal Analyzer : TD‑SCDMA/HSDPA Pass/Fail Measurements
 
TD‑SCDMA/HSDPA Pass/Fail Measurements
The following is an example of a Pass/Fail measurement.
Measurement Setup
Refer to the User Guide for selecting the TD‑SCDMA/HSDPA Signal Analyzer mode.
1. Press the Measurements main menu key.
2. Press the Pass/Fail submenu key to activate the test.
3. Press the Pass/Fail submenu key again to display the Pass/Fail menu.
4. Press the Select Pass/Fail Test submenu key. Use the arrow keys or the rotary knob to highlight the desired test mode, then press the Select Test submenu key or the Enter key.
5. Press the Reset submenu key to begin a new pass/fail test measurement (see Figure: TD‑SCDMA/HSDPA Pass/Fail Measurements).
6. Press the Back submenu key to return to the Measurements menu.
TD‑SCDMA/HSDPA Pass/Fail Measurements