 | Meas Mode Press this submenu key to open the Select Meas Mode list box and select Single or Continuous measurement mode. The current selection is displayed on the submenu key. Refer to section Measurement Mode Selection on this page. Detect Parameter Press this submenu key to automatically detect Mode, GI, and TMCC Information from the input signal. Measurement begins when parameters are detected. For additional information, refer to the descriptions for the Mode, GI, and TMCC Information submenu keys in the Meas Setup (2/2) (Delay Profile) Menu and Meas Setup (2/2) (Inband Spectrum) Menu, and also refer to Common Modulation Keys in Meas Setup (2/2) Menu in ISDB‑T Signal Analyzer. Delay Profile Press this submenu key to activate the Delay Profile measurement mode and the associated Meas Setup (2/2) menu submenu keys. A red dot in the upper right portion of the submenu key denotes that this measurement mode is selected. Inband Spectrum Press this submenu key to activate the Inband Spectrum measurement mode and the associated Meas Setup (2/2) menu submenu keys. A red dot in the upper right portion of the submenu key denotes that this measurement mode is selected. Marker Press this submenu key to open the Marker menu. More Press this submenu key to display the Meas Setup (2/2) Menu for either Delay Profile or Inband Spectrum, depending upon which measurement mode you have activated. |