Spectrum Master™ MS271xE User Guide : General Information : Instrument Description
 
Instrument Description
The Spectrum Master MS2712E and MS2713E are integrated multi-functional test instruments that eliminate the need to carry and learn multiple test sets. The Spectrum Master can be configured to include: spectrum analyzer, interference analyzer with interference mapping capabilities, coverage mapping, channel scanner, gated sweep, tracking generator, power meter, high accuracy power meter, and AM/FM/PM analyzer. In addition, the Spectrum Master can be configured to include 3GPP, 3GPP2, IEEE 802.16, ISDB-T, and PIM analyzer. A GPS receiver can be added to both the MS2712E and MS2713E Spectrum Master models.
The bright 8.4 in TFT color display provides easy viewing in a variety of lighting conditions. All Spectrum Master models are equipped with a Li-Ion battery delivering more than three hours of battery life.
The combination of a touch screen and keypad enables users to navigate menus with the touch screen and enter numbers with the keypad.
The internal memory is large enough to store approximately 2,000 traces or setups. Measurements and setups can also be stored in a USB flash drive or transferred to a PC using the included USB cable.
Note 
Not all after‑market USB drives are compatible with the MS2712E/13E. Many drives come with a second partition that contains proprietary firmware. This partition must be removed. Only one partition is allowed. Refer to the individual manufacturer for instructions on how to remove it. You may also try reformatting a drive that contains a single partition using FAT32 format.
Available Models
Table: Spectrum Master Models lists the Spectrum Master models described in this User Guide.
Spectrum Master Models
Model
Frequency Range
MS2712E
Spectrum Analyzer, 9 kHz to 4 GHz
MS2713E
Spectrum Analyzer, 9 kHz to 6 GHz
Available Options
Available options for the Spectrum Master are shown in Table: Available Options (Sheet 1 of 2).
Available Options (Sheet 1 of 2)
MS2712E
MS2713E
Description
MS2712E-0009
MS2713E-0009
20 MHz Bandwidth Demod
MS2712E-0010
MS2713E-0010
Bias-Tee
MS2712E-0019
MS2713E-0019
High-Accuracy Power Meter (requires External Power Sensor)
MS2712E-0020
MS2713E-0020
Tracking Generator
MS2712E-0025
MS2713E-0025
Interference Analyzer (Option 31 recommended)
MS2712E-0027
MS2713E-0027
Channel Scanner
MS2712E-0029
MS2713E-0029
Power Meter
MS2712E-0030
MS2713E-0030
ISDB-T Digital Video Measurements(1)
MS2712E-0031
MS2713E-0031
GPS Receiver (requires GPS Antenna)
MS2712E-0032
MS2713E-0032
ISDB-T SFN Measurements(1)
MS2712E‑0057
MS2713E‑0057
DVB‑T/H BER Measurements (requires Option 64; cannot be ordered with Option 759)
MS2712E-0064
MS2713E-0064
DVB‑T/H Digital Video Measurements(1)
MS2712E-0078
MS2713E-0078
DVB‑T/H SFN Measurements(1)
MS2712E-0079
MS2713E-0079
ISDB‑T BER Measurements (requires Option 30; cannot be ordered with Option 759)
MS2712E-0090
MS2713E-0090
Gated Sweep
MS2712E-0098
MS2713E-0098
Standard Calibration to ISO17025 and ANSI/NCSL Z540-1. Includes calibration certificate.
MS2712E-0099
MS2713E-0099
Premium Calibration to ISO17025 and ANSI/NCSL Z540-1. Includes calibration certificate, test report, and uncertainty data.
MS2712E-0431
MS2713E-0431
Coverage Mapping (requires Option 31)
MS2712E-0444
MS2713E-0444
EMF Measurements (requires Anritsu Isotropic Antenna)
MS2712E-0509
MS2713E-0509
AM/FM/PM Analyzer
MS2712E-0752
MS2713E-0752
CPRI LTE RF Measurements (requires Option 759)
MS2712E-0753
MS2713E-0753
OBSAI LTE RF Measurements (requires Option 759)
MS2712E-0759
MS2713E-0759
RF over Fiber Hardware (requires Option 752 or 753; cannot be ordered with Option 57 or 79)
MS2712E-0880
MS2713E-0880
GSM/GPRS/EDGE Measurements(1)
MS2712E-0881
MS2713E-0881
W-CDMA/HSPA + Measurements(1) (Option 31 recommended)
MS2712E-0882
MS2713E-0882
TD-SCDMA/HSPA + Measurements(1) (requires Option 31 for full functionality)
MS2712E-0883
MS2713E-0883
LTE/LTE-A FDD/TDD Measurements(1) (requires Option 31 for full functionality)
MS2712E-0884
MS2713E-0884
CDMA/EV-DO Measurements(1) (requires Option 31 for full functionality)
MS2712E-0885
MS2713E-0885
WiMAX Fixed/Mobile Measurements(1) (requires Option 31 for full functionality)
MS2712E-0886
MS2713E-0886
LTE 256QAM Demodulation Measurements (requires Option 883 or Option 552(2))
MS2712E-0887
MS2713E-0887
NB-IoT Measurements(1)
1 Requires Option 9.

2 This option is obsolete.

Calibration and Verification
Anritsu recommends an annual calibration and performance verification of the Spectrum Master by local Anritsu service centers. The Spectrum Master is self-calibrating and there are no field-adjustable components. Contact information for Anritsu Service Centers is available at http://www.anritsu.com/contact-us.