Measurements Menu

When not active, some submenu keys have no arrow to indicate a sub menu, and the circular indicator has a plain background. The circular indicator with a red background and the sub menu arrow appear only when these submenu keys are active.

Key Sequence: Measurements

Measurements Menu

BERT Press this submenu key to open the “BERT Menu” and select the display type for viewing test results, choosing from: Table, Histogram, or Event List. Rx Signal Press this submenu key to display Rx Signal measurements. VF Press this submenu key to display VF level measurements. Press the submenu key again to open the “VF Menu” for configuration. Measure Time This submenu key opens a dialog box to set the measurement time. Choose from 12 settings, which range from 1 minute (minimum) to 3 days (maximum). You can also choose Manual, which runs any length of time, indefinitely, until the Stop/Start main menu key is pressed. Use the arrow keys or the rotary knob to enter a value, and then press Enter or the Rotary Knob to continue, or press Esc to abort. Clear History Press this submenu key to erase the history of displayed events and measurements. Also, clears any red History indicators in the yellow‑highlighted, upper portion of the measurement display. Save Results Press this submenu key to save the results of a measurement. See Chapter 3 of the User Guide for more information.

Copyright 2010 Anritsu Company
	Anritsu Company
	1-800-ANRITSU
	10450-00024, Rev. B
	mmdtechpubs@anritsu.com