T1/FT1 Analyzer (Option 51 or 54)  

Introduction

Selecting the T1 Analyzer Mode

T1 Fundamentals

Network Equipment

T1 Display

Testing T1 Circuits

T1 Configuration Screen

Signal Setup

Payload Setup

T1 Pattern/Loop Screen

T1 Error/Alarm Screen

T1 Measurement Screen

Start/Stop Key

In‑service Measurements

Required Equipment

Measurement Setup Procedure

Vpp Measurement Procedure

VF, DS0 Test Procedure for In-service Measurements

Out‑of‑service Measurements

Required Equipment

Measurement Setup Procedure

Activate Remote Loop Up and Loop Down Code

To Set Errors/Alarms

Vpp and Frequency Measurement Procedure

BERT Measurement Procedure

Basic BERT Measurement Procedure

Quick Check

Histogram Display

To Insert Errors/Alarms

Event List

DS0 Testing

Measuring Clock and Frame Slips

Histogram Explanations

T1/FT1 Menus

Configuration Menu

Signal Setup

Payload Setup

Pattern/Loop Menu

Select Loop Code Menu

Error/Alarm Menu

Measurements Menu

BERT Menu

Histogram Menu

VF Menu

Calibrate Menu

Sweep Menu

Measure Menu

Trace Menu

Limit Menu

Other Menus

Introduction

This chapter provides a brief description of T1 circuits as well as T1 measurements, and also explains how to measure T1 performance using the instrument with Option 51 installed.

Copyright 2010 Anritsu Company
	Anritsu Company
	1-800-ANRITSU
	10450-00024, Rev. B
	mmdtechpubs@anritsu.com