T1 Configuration Menu

Key Sequence: Configuration

Signal Setup

T1 Signal Setup

Test Mode Select from one of three submenu keys for the type of test mode desired. AUTO Press this submenu key to automatically select a Framing Mode and Pattern to match the connected signal. For additional explanation of the use of this key, refer to section “AUTO Signal Setup Explanation”. DS1 Press this submenu key for T1 testing. DS3 Press this submenu key for T3 testing.

 

 

Copyright 2010 Anritsu Company
	Anritsu Company
	1-800-ANRITSU
	10450-00024, Rev. B
	mmdtechpubs@anritsu.com