General Information

About this Manual

Introduction

Remote Programming Setup and Interface

Ethernet Interface Connection and Setup

USB Interface Connection and Setup

Sending SCPI Commands

About this Manual

This SCPI Programming Manual provides information for remote operation of the Spectrum Master MS272xC High Performance Base Station Analyzer using commands sent from an external controller via Ethernet or USB connection. This Programming Manual includes the following:

•	An overview of Ethernet and USB connection to the Spectrum Master.

•	An overview of Standard Commands for Programmable Instruments (SCPI) command structure and conventions.

•	The IEEE common commands that are supported by the MS272xC.

•	A complete listing and description of all the SCPI commands that can be used to remotely control functions of the Spectrum Master. The commands are organized by instrument mode starting in Chapter 3.

This manual is intended to be used in conjunction with the Spectrum Master MS272xC User Manual, P/N: 105800-00277. Refer to that manual for general information about the MS272xC, including equipment set up and operating instructions.

Introduction

This chapter provides a general description of remote programming setup, interface connections using Ethernet or USB, and cable requirements.

Copyright 2010 Anritsu Company
	Anritsu Company
	1-800-ANRITSU
	10450-00025, Rev. A
	mmdtechpubs@anritsu.com