General Information : Fixed WiMAX Signal Analyzer : Fixed WiMAX Demodulator : Pass / Fail Mode

Pass / Fail Mode
The Pass / Fail mode allows selection of a user‑defined file that specifies a list of measurements with Pass / Fail criteria. This mode sequences through the appropriate measurements and indicates a pass or fail state based on the criteria. By using Master Software Tools, a custom test list can be created and uploaded into the instrument. All critical measurements can be selected for pass fail testing. The results are displayed in a table format with clear identification of Pass / Fail results, including minimum and maximum thresholds and measured results.
Procedure:
1.
2.
Press the Measurements main menu key.
3.
Press the Pass/Fail Mode submenu key.
4.
Press the Pass/Fail Mode submenu key again to activate the submenu.
5.
Press the Select Pass/Fail Test submenu key to view a list of Pass / Fail test definition files.
6.
Use the Up/Down arrow keys or the rotary knob to highlight the applicable Pass / Fail test on the list, and press the Enter key to select.
The sample image in Figure: “Pass Fail Mode” may differ from any image on your instrument.
 
 

Copyright 2010 Anritsu Company
Anritsu Company
1-800-ANRITSU
10450-00025, Rev. A
mmdtechpubs@anritsu.com