General Information : Fixed WiMAX Signal Analyzer

Fixed WiMAX Signal Analyzer
Introduction
These Anritsu handheld instruments offer two Fixed WiMAX options: Fixed WiMAX RF Measurements and Fixed WiMAX Demodulator Measurements. Connect your instrument to any Fixed WiMAX base transceiver station (BTS) for accurate RF and demodulator measurements. These instruments can measure both FDD (Frequency Division Duplexing) and TDD (Time Division Duplexing) networks.
They can measure WiMAX BTS transmitter performance over the air by connecting an antenna or by connecting the BTS equipment directly to the instrument. To connect the BTS equipment directly to the instrument, connect the power amplifier of the BTS equipment to the RF In connector of the instrument by using a coupler or attenuator. To measure a WiMAX signal over the air, connect the appropriate frequency band antenna to the instrument RF In connector.
Caution 
The maximum (without damage) input level of the RF In port is + 30 dBm. To prevent damage, always use a coupler or a high power attenuator.
Instrument Options for Fixed WiMAX:
Fixed WiMAX RF Measurements (Option 46)
Fixed WiMAX Demodulator (Option 47)
 

Copyright 2010 Anritsu Company
Anritsu Company
1-800-ANRITSU
10450-00025, Rev. A
mmdtechpubs@anritsu.com