General Information : Fixed WiMAX Signal Analyzer : Sweep Menu

Sweep Menu
Key Sequence: Shift > Sweep (3) key
This submenu key toggles between continuous sweep and single sweep. In single sweep mode, the results of a sweep are displayed on the screen while the instrument awaits a trigger event to start a new sweep.
Pressing this submenu key causes the instrument to make a single sweep when the instrument is in single sweep mode. This key has no function when the instrument is in continuous sweep mode.
Measure Menu
This menu open the “Measurements Menu”.
 

Copyright 2010 Anritsu Company
Anritsu Company
1-800-ANRITSU
10450-00025, Rev. A
mmdtechpubs@anritsu.com