 | Preset This key resets all parameter settings for the current measurement mode to their factory default values, and switches the display to the default view for that mode. Measurement settings specific to other modes or applications, are not affected. Save Setup Press this submenu key to open the Save dialog box (Figure: Save Dialog Box) to name and save the current operating settings, allowing them to be recalled later to return the instrument to the state it was in at the time the setup was saved. The saved setup can be named using the touch screen keyboard. Use the Caps key to select an upper case letter. Use the Left/Right directional arrows to move the cursor position. Press Enter to save the setup. Note: Set the File type as Setup. Refer to Save Menu for details. Recall Setup Press this submenu key to select and recall a previously stored instrument setup using the Recall Menu. Use the rotary knob, the Up/Down arrow keys, or the touchscreen to highlight the saved setup, and press Enter. All current instrument settings are replaced by the stored setup information. |