This SCPI Programming Manual provides information for remote operation of the following Anritsu instruments using commands sent from an external controller via Ethernet or USB connection:
• S331E, S332E, S361E, S362E Site Master
• MS2711E, MS2712E, MS2713E Spectrum Master
• MT8212E, MT8213E Cell Master
This Programming Manual includes the following:
• An overview of Ethernet and USB connection to the instrument.
• An overview of Standard Commands for Programmable Instruments (SCPI) command structure and conventions.
• The IEEE common commands that are supported by the instruments.
• A complete listing and description of all the SCPI commands that can be used to remotely control functions of the instrument. The commands are organized by measurement mode starting in All Mode Commands.
This manual is intended to be used in conjunction with the instrument User Guide:
• Site Master User Guide PN: 105800-00252
• Spectrum Master User Guide PN: 10580-00251
• Cell Master User Guide PN: 10580-00250
Refer to the instrument User Guide for general information about the instrument, including equipment setup and operating instructions.
Introduction
This chapter provides a general description of remote programming setup and interface connections using Ethernet or USB, and sending SCPI commands to the instrument.