VNA Master™Programming Manual : Power Monitor Commands : :CALCulate:PMONitor:RELative Subsystem
 
:CALCulate:PMONitor:RELative Subsystem
This subsystem contains commands to turn the relative power level on and off.
Relative State
:CALCulate:PMONitor:RELative[:STATe]
Description
Enables/disables the Relative power level. Setting the value to ON or 1 turns on the relative power level. Setting the value to OFF or 0 turns off the relative power level. The query version of the command returns a 1 if the relative power level is ON and returns a 0 if the relative power level is OFF.
Syntax
:CALCulate:PMONitor:RELative[:STATe] OFF|ON|0|1
:CALCulate:PMONitor:RELative[:STATe]?
Cmd Parameter
<boolean> OFF|ON|0|1
Query Response
<bNR1> 0|1
Default Value
0
Example
To turn Off the relative power:
:CALCulate:PMONitor:RELative:STATe OFF
:CALCulate:PMONitor:RELative 0
To turn On the relative power:
:CALCulate:PMONitor:RELative:STATe ON
:CALCulate:PMONitor:RELative 1
Front Panel Access
Measure or Shift‑4 (Measure), Relative Power