VNA Master™Programming Manual : Power Monitor Commands : :CALCulate:PMONitor:ZERO Subsystem
 
:CALCulate:PMONitor:ZERO Subsystem
This subsystem contains commands to turn the zero power level on/off.
Zero State
:CALCulate:PMONitor:ZERO[:STATe]
Description
Enables and disables the Zero power level. Setting the value to ON or 1 turns On the Zero power level. Setting the value to OFF or 0 turns Off the Zero power level. The query version of the command returns a 1 if the Zero power level is ON and returns a 0 if the Zero power level is OFF.
Syntax
:CALCulate:PMONitor:ZERO[:STATe] OFF|ON|0|1
:CALCulate:PMONitor:ZERO[:STATe]?
Cmd Parameter
<boolean> OFF|ON|0|1
Query Response
<bNR1> 0|1
Default Value
0
Example
To turn Off the Zero power:
:CALCulate:PMONitor:ZERO:STATe OFF
:CALCulate:PMONitor:ZERO 0
To turn On the Zero power:
:CALCulate:PMONitor:ZERO:STATe ON
:CALCulate:PMONitor:ZERO 1
Front Panel Access
Measure or Shift‑4 (Measure), Zero