VNA Masterâ„¢Programming Manual : VNA Commands : :SOURce:CORRection:RVELocity Subsystem
 
:SOURce:CORRection:RVELocity Subsystem
Commands in this subsystem deal with the parameters of the physical media of the Device Under Test.
 
Propagation Velocity
:SOURce:CORRection:RVELocity
Description
Sets the propagation velocity of the cable for DTF measurements.
Syntax
:SOURce:CORRection:RVELocity <number>
:SOURce:CORRection:RVELocity?
Cmd Parameter
<NRf> <number> (unitless)
Query Response
<NR3> <number> (unitless)
Default Value
1
Range
0.001 to 1.0
Front Panel Access
Freq/Dist (or Freq), Domain Setup, Setup Distance, Additional Dist Setup, Propagation Velocity
 
Cable Loss
:SOURce:CORRection:RVELocity:CABLoss
Description
Sets the cable loss for DTF measurements. The query version of this command returns the cable loss in dB/m.
Syntax
:SOURce:CORRection:RVELocity:CABLoss <number>
:SOURce:CORRection:RVELocity:CABLoss?
Cmd Parameter
<NRf> <number> (unitless)
Query Response
<NR3> <number> (unitless)
Default Value
0.0
Range
0.0 to 5
Front Panel Access
Freq/Dist (or Freq), Domain Setup, Setup Distance, Additional Dist Setup, Cable Loss (when DUT Line Type is Coax)