[:SENSe]:SWEep Subsystem
This subsystem contains commands pertaining to the Vector Voltmeter mode.
IF Bandwidth
[:SENSe]:SWEep:IFBW
Description
Sets the IF Bandwidth. When the Measurement View is set to VNA, the <freq value> in Hz must be one of the following 13 values:
100000|50000|20000|10000|5000|2000|1000|500|200|
100|50|20|10
When the Measurement view is set to FIELD, the <freq value> in Hz must be one of the following 3 values:
100000|1000|10
The query form of this command returns the frequency in Hz.
Syntax
[:SENSe]:SWEep:IFBW <freq value>
[:SENSe]:SWEep:IFBW?
Cmd Parameter
<char> <freq value>
Query Response
<char> <freq value>
Default Value
10000
Default Units
Hz
Range
100 to 100000 Hz
Example
Sets the IF Bandwidth frequency to 200 Hz:
:SENS:SWE:IFBW 200
Sets the IF Bandwidth frequency to 100 kHz:
:SENS:SWE:IFBW 100000
Front Panel Access
CW or Table, IFBW